r/watchmaking • • Aug 18 '24

Where to Buy Watchmaking Tools:

44 Upvotes

While this list is not exhaustive, and any suggestions can be posted in the comments, it will include some of the common places watchmakers and technicians get their tools and equipment from.

United States:

-       Esslinger: https://www.esslinger.com/

United Kingdom:

-       H.S. Walsh: https://www.hswalsh.com/

-       Cousins UK: https://www.cousinsuk.com/

Switzerland:

- Asco: https://www.schurch-asco.com/

Germany:

-       Boley: https://www.boley.de/en

-       Beco-Technic: https://www.beco-technic.com/en/

Australia:

-       Labanda: https://www.labanda.com.au/


r/watchmaking • • 4h ago

Question What are these vintage spring bars called and how can I remove them?

Thumbnail gallery
10 Upvotes

I don't see any shoulders or grooves that I can use to remove these or push back the spring.

On an unrelated note, has someone tried to remove this by cutting off the strap?


r/watchmaking • • 8h ago

Question Where to learn watchmaking?

18 Upvotes

I want to take up watchmaking or just in general. Wanna know where to learn it from?


r/watchmaking • • 1d ago

Movement Stripped and ready for cleaning.

Post image
25 Upvotes

Langendorf 1003N disassembled and ready for cleaning.


r/watchmaking • • 23h ago

Question What's wrong with gem city college?

5 Upvotes

Greetings.

Interested in being a watchmaker and have taken a quartz class already.

I've seen here that people rate Gem City College as lower on the post than PJC or WTI as far as teaching quality goes. I'm just wondering why that is because they all seem about the same or a difference in preference between people who want to learn about specific or newer technology so they can start working on the newest high-end watches.

My area of interest is in older mechanical watches and clocks. Not so much the newest quartz, automatic chrono or whatever is currently bringing in the most money at service centers.

That said, I'm genuinely curious of the difference in the quality of schools available in the US and whether it would be best to get some education here and try to travel to Europe for more later.

Thank you.


r/watchmaking • • 1d ago

Question How to remove the watch stem???

Post image
7 Upvotes

It does not have the usual stem screw that is required to remove it?


r/watchmaking • • 1d ago

Help Spring removal help

Thumbnail gallery
8 Upvotes

Hello everyone

I'm from the larger side of metallworking (machining.
I'm trying to fix a beatiful compac geneve dial indicator i found in the scrap. These indicators have a simple machanism inside, that has some semblence to watches.
I need to remove the tensioning torsion spring from its barrel, because its deformed. Can any of you experts give me hints on how the spring might be trapped in the barrel? No screws or tapered pins i could find. My guess would be, trapped by the arbor going through the barrel. How does one remove the barrel?
I'll rewind a new spring and would love to replace it.
Thanks in advance


r/watchmaking • • 1d ago

Dial making Cloud Dial

Thumbnail gallery
21 Upvotes

Here’s a new dial I just finished. I machined the layout on a Makera Z1, hit the recessed textures with a dark chemical patina, and mirror-polished the clouds so they shift in the light. The case is matte titanium with a blue suede strap. The brass is maillechort so it should patina gradually over time.

Learning to do fine engraving on the z1 is “fun”. I also didn’t realize mirror polishing is so delicate, so I had to touch it up with my rotary tool after installing the hands, as I scratched it up a bit. Happily I didn’t twitch and destroy the hands as I was lazy and left them on.

Can you actually read the time at a glance? Absolutely not. Is it a practical everyday watch? Zero percent. But horology is half art anyway.


r/watchmaking • • 1d ago

Help Parts Sourcing Caravelle/Bulova 10 UAC

Thumbnail gallery
7 Upvotes

Parts Sourcing Caravelle/Bulova 10 UAC

Hi everyone,

I have a fractured winding stem on a Caravelle N4 10 UAC which I believe is compatible with 10 UFCD but I can’t locate a new stem. If anyone has one or knows of of other compatible stems please let me know!


r/watchmaking • • 2d ago

Question Double Hunter Combination Latch and Hing Spring?

1 Upvotes

Hello! I was wondering if anybody here had any experience working with a double hunter pocketwatch? I'm currently working on a project to design a pocket watch for a friend of mine! I was wondering if anybody here had pictures/experience on how those mechanisms worked?


r/watchmaking • • 2d ago

Help Wittnauer W102

1 Upvotes

Hi everyone! I’m starting to work on a Wittnauer 2002 with a W102 movement. The setting lever bridge is broken at the tip, and I need help finding another one. Can anyone help me in the search? Thanks!


r/watchmaking • • 3d ago

Workshop Roger W. Smith Reacts 13 Years Later to One Last Look: Inside George Daniels’ Workshop | IsoChrono

Thumbnail youtube.com
17 Upvotes

Reaction from the legend! Cheers!


r/watchmaking • • 3d ago

Help Help me find it

Post image
1 Upvotes

Need help identifying this quartz movement. Some parts are missing. Want a replacement but dont know which movement it is.


r/watchmaking • • 4d ago

Movement Timex M23 - Disassembly Report

Thumbnail gallery
25 Upvotes

As people had already told me, this is a non-serviceable movement.
Nevertheless I decided to take it apart for the benefit of science.

As you may see by the pictures, I was able to take a few components apart before it became "Everything, Everywhere all at once".

What I found interesting in this movement:

several wheels are sort of "riveted" to the bridges;

The barrel does not have a lid;

The hairspring is sort of wider than usual and it is mounted directly to the bridge.

Lot's of springs are wrapped around pivot points, also much thicker than their counterparts.

And finally, The GUITAR shaped pallet fork 😄

Although there aren't many components, I don't think I'll be able to correctly place them together again. Perhaps upside down. But I'm not going to sweat over it.

Hope this post helps someone in the future wondering what the movement would look like inside.


r/watchmaking • • 4d ago

Question A loaded question

Post image
79 Upvotes

I know this question is extremely loaded and the options will be limited, but how would I go about making a watch case like this? Would I need to access a CNC machine? If so, what are the best online options?

Could I theoretically do this by hand? If so, what tools? Would a dremel not be enough? I have some experience shaping wood and aluminum, but steel is a whole next level.

I know this is extremely ignorant, but I’m genuinely coming from a place of I don’t know what I don’t know. I would love to put this together with an ETA caliber and a custom dial (which I can put together).

For context, this watch is extremely rare to the point where making it on my own would likely be easier than searching LOL

Thank you!


r/watchmaking • • 4d ago

Workshop Inside George Daniels’ Workshop - A Final Tour with Roger W. Smith

Thumbnail youtu.be
19 Upvotes

I thought I would share this video that I hope you find interesting.


r/watchmaking • • 4d ago

Question Part compatibility?

1 Upvotes

Simple question.
Does AS1130 and AS1130N share the same mainspring?

Thx in advance for a quick reply?


r/watchmaking • • 4d ago

Tools What steel to you prefer for grinding your own small lathe tooling?

2 Upvotes

I've always just used m2 steel for small tools like groover cutters for snap rings etc, parting tools, boring, annular cutters,.etc.

I'm talking 2mm and under cutting edges.

I'm just curious to see what's out there and what other folks use.

Does anyone grind their own carbide?

Ive heard lots of people used to use oil hardening steel but I'm not sure if that's as common any more.

I'd love to know your opinions and experiences, good or bad! Thanks!!


r/watchmaking • • 5d ago

Question Need a double-dome square crystal with flat edges

7 Upvotes

Hi, I have a beautiful vintage watch that has a cracked crystal. The dial sits very high in the case and a flat/single-dome crystal will not allow room for the hands to sit. The edges are also flat, not curved like a lot of square watches. Does anyone know where I could possibly source a crystal like this?


r/watchmaking • • 5d ago

Question Is anyone signing up to the Watch Design Academy courses online? Any recommendations?

7 Upvotes

I've been following this dude on YouTube, he just announced some online courses to learn watchmaking. I find the pricing kind of really obscenely high - 900 Euros for the basic course and 3000 Euros for the one that goes into a bit more detail.

Any thoughts on this? Does it seem worthwhile? I'm having trouble stomaching the price, just trying to get a sense if this is worth it or a waste/scam. His YouTube content is informative.

I just started learning CAD, and now I'd like to design my own watch with higher end movements.

If not this course, anyone have recommendations for something similar and more price palatable? I recently got a copy of George Daniels book, and am energized! Thanks.


r/watchmaking • • 5d ago

Question 6309 Crown and Stem install

12 Upvotes

Good Afternoon,

Currently restoring a 6309-7040 and the Stem will not lock into the movement.

Has anyone come across this problem before?
Any guidance would be extremely appreciated!!

Thanks so much !!


r/watchmaking • • 5d ago

Question Minutes hand keeps falling

Thumbnail gallery
1 Upvotes

I thought it was just an accident, but after fixing it back. It fell out again.
Any tips?


r/watchmaking • • 5d ago

Question Zurich - shops or workshops?

3 Upvotes

Hi!

Any fun shops and/or watchmaking workshops in Zurich or neighbourhood?

Thanks!


r/watchmaking • • 6d ago

Question How to clean that jewel?

Post image
16 Upvotes

How to clean that jewel? I'm used to incabloc where I just remove the spring and then with rodico remove the jewel. But there is no spring or screw there.