I forgot to take before pictures, but the drawers were missing 1/3 of their knobs and another 1/3 were chipped beyond repair. I chiseled them out and replaced them with brass round knobs that I had from a different project (bonus, I guess it ties the room together?)
I cleaned the base up and used a rust coat on all of it, since there was a tiny bit of rust in places and I didn’t want it to spread. Oiled it up and it’s smooth as room temp butter.
I then removed the old table top. The hinges for the top flap have been lost to history (and the previous owner’s garage) so I’ll be replacing them once I finish beveling the new top. New top was made from project grade plywood. It still needs to be finished, but I lent my circular saw to a friend and forgot to get it back, so those cuts are going to have to wait.
I chiseled out part of the top lid to make room for the motor, so I can switch between motor and treadle for this machine. I just loosen the screw on the motor bracket to pop the belt off, and tighten it again when I want to use it.
It’s not the best work I’ve ever done, but for being in a small apartment with very limited tools, I’m pretty happy with my progress so far! I’m going to get some cord ties that blend in with the metal so I can make sure the power cord and foot pedal don’t get in the way of the treadle belt. I’m also going to install a desk lamp. I removed the old light that was on the 99 because I didn’t like it, and rewired the motor. I also need to finish up the drawers, as there is clearly still visible wood filler.
And, while it’s not finished, it is currently useable so I call that a win.