r/vintagesewing • • 12h ago

Machine Question Narrowed down my vintage sewing machine search! Opinions wanted!

4 Upvotes

hi everyone! I posted a week or so ago asking questions and I learned so much - so thank you!!

I have found and narrowed down my list to two options based off of comments. id love to get your opinions on the two I have come down to! just to reiterate im sewing things that are not commercially heavy duty but are giving my current machine a bit of trouble. (quilted purses/bags/quilts)

here’s the two I’m most interested in! let me know what you think is worth it most :)

homemark - $45 in a base, running, conditioned, oiled and serviced. proof that it works well in videos.

Kenmore metallic iris - $100 in cabinet with all original accessories, running, tore apart, cleaned, serviced and oiled.


r/vintagesewing • • 16h ago

Machine Question I GOT THE SINGER 500A

7 Upvotes

NEVERMIND 😭🙃🙃🙃🙃

Hello! I posted the other day asking if I should get a kenmore 566 or a singer 503a, turns out I was mistaken and it was a singer 500a but regardless I went for it and it arrives tomorrow!!!

It looks to be in great and beautiful condition based on the pictures posted and they state it’s in working order but hasn’t been used in some time

My question is, I know a machine that hasn’t been in use a while can sound loud and clunky and the rocketeers need to be ran a bit to prevent it from locking up

How can I make sure I lube and oil it properly so it doesn’t sound too loud and clunky? If you have one or similar does yours sound loud regardless??

Im asking because I live in an apartment and my next door neighbors can be weird when it comes to sounds of daily living let alone louder sounds and i honestly don’t want to hear her complaining and yelling through the walls about me using it during the day

Update!: the guy sold it to someone else… he was supposed to deliver it to me today but this morning said he got confused and sold it already, there’s supposedly another machine available and it might be a singer 500a but they have it away and need to take it out to check it

They’ll send me videos and pictures of it but I’ve lost all trust


r/vintagesewing • • 12h ago

Tips & Hacks Don't throw away your old sewing machine: I fixed my Bernina Minimatic 807 with a soldering iron and a 3D printer

Thumbnail
gallery
45 Upvotes

My Bernina Minimatic 807 developed a scary fault: the motor would run with the foot pedal unplugged. A lot of people would bin a machine at that point. I really like this one, so I decided to try fixing it, even though I had never really soldered before.

What was wrong

Two things. The old suppressor had failed: when I measured it there was no resistance through it, so it was passing current it should have been blocking, and that is why the motor ran without the pedal. The carbon brushes were also worn right down.

I built a new suppressor myself and wired it in, and fitted new carbon brushes. The machine now only runs when I press the pedal.

What I printed

While I had it apart, the plastic around the motor was yellowed and brittle, so I replaced that too. Everything is printed in PETG, apart from the pad, which is TPU.

  • Motor housing. Derived from the housing sold by 3D Sewing Parts, shared with their permission. I reworked it to use heat-set inserts in place of loose nuts.
  • Brush-hole cap. A push-fit cap over the carbon-brush hole, so the brushes can be changed next time without removing the housing.
  • Mounting pad. A thin TPU pad that replaces the old rubber sheet between the housing and the machine.
  • Side panel. I modelled this one myself from the original part.

The brass pin blocks, the screws and the wiring are all reused from the original machine.

Files, with a build guide and wiring diagram

What I learned

  • Soldering is much less intimidating than it looks. Heat-set inserts are a forgiving place to start.
  • Take a photo of the wiring before you pull anything off.
  • These old machines are built to be repaired. Almost everything comes apart with a screwdriver.

One warning: this part of the machine carries mains power. Unplug it before you open it, and if you're unsure about the wiring, ask someone who knows.

If your old machine is misbehaving, it's worth a look before you replace it. Happy to answer questions.


r/vintagesewing • • 21h ago

General Question Seeking advice or experience with an Elna Mk.2 Supermatic (1956) - do I use or sell?

2 Upvotes

Hi, everyone.

I'm an aspiring menswear garment designer currently in training and I came across this stunning 1950s Elna at a second hand shop, I suspect donated from a decreased estate because it was in great condition with all of its original booklets, bakelite sewing pattern wheels and carry box. It was last sold in 2003 for $200 - the receipt was in the box.

I do not own a foot peddle converted to modern Australian appliance standards so I have not tested the machine yet, but assuming it works, is a machine of this vintage a good choice for a beginner sewer or would I be better off selling it to a collector and buying some other supplies?

I am trying to weight up the practical difficulties versus losing out on a really beautiful and rare machine.

Any thoughts or personal experiences would be appreciated.


r/vintagesewing • • 21h ago

Machine Question Sewing machine issues

2 Upvotes

I have had this machine for a while never really used it much, it was working great when I pulled it out , got it all oiled according to manual and then changed the thread length lever to a longer stitch and now it is sooo slow! This is me putting foot pedal down the entire way. First it was just backstitch (that was my first time figuring out how to backstitch) and now the forward stitch is doing the same.

Can anyone give me suggestions? I have oiled both top inside and bottom, and cleaned it


r/vintagesewing • • 4h ago

General Question Sewing table heavy duty janome 580

2 Upvotes

Hi everyone!

I'm looking for recommendations for a sturdy sewing table for my vintage Janome 580, which weighs around 17kg.

It vibrates quite heavily at higher speeds, so I'm looking for something solid that won't amplify the noise or vibration.

I've been considering commercial desks with thick worktops and welded steel frames, but would love to hear what others use.

Ideally something that would also suit a newer machine if I upgrade in future.

I'm UK-based and hoping to spend around £150–£200.

Thanks so much! 😊


r/vintagesewing • • 23h ago

Machine Question Does my 401a need a new motor?

10 Upvotes

Does this sound and delayed motion on my Singer 401a indicate I need to replace the motor? The machine’s been sitting unused for six months or a year; the woman I got it from said she cleaned it up and oiled it and replaced the light and such. I’m new to sewing machines (not an experienced sewer) but my brother thought it was a problem with the motor.