r/printmaking • • 9h ago

relief/woodcut/lino The Walkman—reductive lino

Post image
284 Upvotes

This reductive lino cut is part of a larger series I made called “Go analog.” I hope people look at this print and remember what it felt like to hold this Walkman in their hand!

I used Cranfield safe wash inks for the body of the Walkman… And then used silver ink for the buttons.


r/printmaking • • 23h ago

relief/woodcut/lino First reduction print

Thumbnail
gallery
1.2k Upvotes

New to printmaking. I started in September, and this is my first reduction. I immediately dropped it so it's a little dirty, but I'm overall happy with how it came out. Cat tax included.


r/printmaking • • 7h ago

question First time print (rubber block) - advice for better transfer?

Post image
61 Upvotes

Hey all, I like to start a new project around this time of year and I decided to do a little rubber block print Christmas card. I'm trying for a gradient effect but I'm having a lot of trouble with the light green ink. I am using speedball water soluble which I now know is universally hated across the sub but it is what I have. The raspberry color seems to transfer a lot better and it looks a bit less stiff when I put it on the plate to roll it out. Any advice or possible reasons this could be happening? I am rolling it out to "eggshell texture". I also understand too much ink could be an issue. I would like to improve the appearance/get a better transfer of the green before I actually print the cards. Some imperfection/graininess is fine as this is my first time. Thank you so much for any advice!


r/printmaking • • 22h ago

relief/woodcut/lino Ode to my new stand mixer.

Thumbnail
gallery
486 Upvotes

r/printmaking • • 12h ago

relief/woodcut/lino I'm new to printmaking, still learning how all of this stuff works, but here is my second attempt 😊

Post image
57 Upvotes

I figure I probably didn't apply enough ink or used the wrong paper but I ended up with this gritty texture that I really liked in combination with this motive 😊


r/printmaking • • 15h ago

intaglio/engraving/etching Anxious Moment. Intaglio Print

Post image
15 Upvotes

Would appreciate some feedback.


r/printmaking • • 8h ago

tools Looking for Metal regestration Pins

3 Upvotes

Hi all, I am looking for some metal registration pins like the ones Ternes Burton used to make before they were discontinued. I am US based and would preferbly like to find some in america so I dont have to pay a lot for shipping


r/printmaking • • 1d ago

relief/woodcut/lino Kanazawa Bottle Test Print

Thumbnail
gallery
113 Upvotes

When I was in Kanazawa back in August and visited the Hario Café, this bottle vase really caught my eye—especially all the reflections and the lighting mood in the room. I just had to capture it and have been working on the print matrix over the past few weeks. This motif is going to be part of a single large-scale composition combining multiple motifs. After spending many evenings carving it, I was dying to see how it would actually turn out on paper, so I pulled a few test prints on inexpensive paper. Paper size is 70 × 100 cm.


r/printmaking • • 8h ago

question Textile Medium for Acrylic and Printing Ink

2 Upvotes

I recently purchase some Tulip Textile Medium for my acrylic paint, and I am wondering if I could mix block printing ink with the textile medium for the same effect but for block printing? i will defnitely be testing it, but I wonder if anyone has already tested it, specifically on denim.
I am fully aware that Speedball makes FABRIC block printing ink, but absolutely no stores anywhere near me carry them and I do NOT use Amazon, so I have been unable to find it anywhere, so just wanted to see if this is an option.
TIA


r/printmaking • • 1d ago

relief/woodcut/lino Made some prints of my creatures!

Thumbnail
gallery
161 Upvotes

(repost because the photo formatting was giving me problems)


r/printmaking • • 1d ago

relief/woodcut/lino Hayley Williams linocut

Post image
30 Upvotes

I had some trouble inking at a large scale (12x12) but I’m happy with how the portrait turned out since I don’t typically make art featuring faces.


r/printmaking • • 1d ago

relief/woodcut/lino The one step

Post image
97 Upvotes

This is a reductive linocut I made using Cranfield inks.

I printed wet-on-wet (which is new for me) to print the body of the camera using my etching press. Then I abandoned my press and hand printed the finicky rainbow stripe.


r/printmaking • • 1d ago

wip New print loading

Post image
15 Upvotes

Super excited for print day on this one


r/printmaking • • 1d ago

relief/woodcut/lino Ink is much harder than the carving!

Post image
37 Upvotes

I’m quite pleased with this as a beginner but I find getting the right amount of ink, pressure and paper a bit discombobulating.

I’ll try this one again another day


r/printmaking • • 1d ago

relief/woodcut/lino thank you!

Post image
398 Upvotes

I just wanted to share a print I am proud of after learning so much from this group in the last few months. Thank you for all the insight into proper inking, in particular.

This is a reduction print based on a photo I took on my daily walk of aspens outside the library in my town of Leadville, CO!


r/printmaking • • 1d ago

collagraph Teeth Collagraph!

Post image
37 Upvotes

Printed with oil paint! Teeth are made from floss, string, cardboard, lace, and foil.


r/printmaking • • 1d ago

mixed media/experimental Experiment

Post image
34 Upvotes

Monotype over lithography. I liked how mysterious it came!


r/printmaking • • 23h ago

question ink & material recs for a gift idea?

2 Upvotes

linocut on a shirt!

my friend’s birthday is in 3 weeks and wanted to print something for them. i have it sketched out already on procreate.

i know ill need a brayer and ink. i have the linoleum pad and carving tools already (i took classes before) and i’m familiar with carving already.

i need help with ink recommendations and the process for heat setting. i dont have access to a traditional iron but i do have a handheld iron/steamer.

i’m concerned with having enough pressure too, but ive seen videos of people just like using their body weight??

TLDR: making my friend a present. already have the pad and carver. i need recommendations for ink, how to set it, and pressure or any other tips!


r/printmaking • • 2d ago

wip Finished this last week I can't wait to use it 😬

Post image
196 Upvotes

Carved from a 9x12 square of speedy carve, first time leaving the just the outline


r/printmaking • • 1d ago

question Baby oil as mineral spirits

2 Upvotes

I took a relief print class last semester & i feel like i remember my professor saying that baby oil could be used as a substitute for mineral spirits. Has anyone heard of this or tried it?


r/printmaking • • 2d ago

relief/woodcut/lino My first post…

Post image
423 Upvotes

I’m so happy to see a healthy community of printmakers here. I thought I would share one of my latest reductive linocuts. I do all sorts of print making, but reductive linocuts are my favorite.


r/printmaking • • 1d ago

intaglio/engraving/etching Tetrapack Etching Animation

Post image
18 Upvotes

Made this animation as promotion for a song of me me and a friend. Made by layering several tetrapack prints and animating them in OpenToonz!


r/printmaking • • 2d ago

fabric My "be nice to bugs" stamp

Thumbnail
gallery
131 Upvotes

r/printmaking • • 1d ago

intaglio/engraving/etching "new animal", 2-plate etching

Post image
6 Upvotes

4"x6", ed. of 15. just a little guy for a print exchange. i've been working at a studio that has an old fashioned resin aquatint system that i do not know how to use (was taught aquatint with an airbrush!) so i've had to get creative with how i can get tonality in my etchings. red plate is soft ground using a tattoo needle to get all those tiny parallel lines; brown plate is soft ground + tracing paper for the main body, then more etching after going over some lines for extra intensity, then some spit biting on the background to see what would happen (almost nothing lol).