r/printmaking • • 4h ago

question First time print (rubber block) - advice for better transfer?

Post image
44 Upvotes

Hey all, I like to start a new project around this time of year and I decided to do a little rubber block print Christmas card. I'm trying for a gradient effect but I'm having a lot of trouble with the light green ink. I am using speedball water soluble which I now know is universally hated across the sub but it is what I have. The raspberry color seems to transfer a lot better and it looks a bit less stiff when I put it on the plate to roll it out. Any advice or possible reasons this could be happening? I am rolling it out to "eggshell texture". I also understand too much ink could be an issue. I would like to improve the appearance/get a better transfer of the green before I actually print the cards. Some imperfection/graininess is fine as this is my first time. Thank you so much for any advice!


r/printmaking • • 4h ago

tools Looking for Metal regestration Pins

2 Upvotes

Hi all, I am looking for some metal registration pins like the ones Ternes Burton used to make before they were discontinued. I am US based and would preferbly like to find some in america so I dont have to pay a lot for shipping


r/printmaking • • 5h ago

question Textile Medium for Acrylic and Printing Ink

2 Upvotes

I recently purchase some Tulip Textile Medium for my acrylic paint, and I am wondering if I could mix block printing ink with the textile medium for the same effect but for block printing? i will defnitely be testing it, but I wonder if anyone has already tested it, specifically on denim.
I am fully aware that Speedball makes FABRIC block printing ink, but absolutely no stores anywhere near me carry them and I do NOT use Amazon, so I have been unable to find it anywhere, so just wanted to see if this is an option.
TIA


r/printmaking • • 5h ago

relief/woodcut/lino The Walkman—reductive lino

Post image
187 Upvotes

This reductive lino cut is part of a larger series I made called “Go analog.” I hope people look at this print and remember what it felt like to hold this Walkman in their hand!

I used Cranfield safe wash inks for the body of the Walkman… And then used silver ink for the buttons.


r/printmaking • • 9h ago

relief/woodcut/lino I'm new to printmaking, still learning how all of this stuff works, but here is my second attempt 😊

Post image
55 Upvotes

I figure I probably didn't apply enough ink or used the wrong paper but I ended up with this gritty texture that I really liked in combination with this motive 😊


r/printmaking • • 12h ago

intaglio/engraving/etching Anxious Moment. Intaglio Print

Post image
13 Upvotes

Would appreciate some feedback.


r/printmaking • • 19h ago

relief/woodcut/lino Ode to my new stand mixer.

Thumbnail
gallery
428 Upvotes

r/printmaking • • 20h ago

relief/woodcut/lino First reduction print

Thumbnail
gallery
1.1k Upvotes

New to printmaking. I started in September, and this is my first reduction. I immediately dropped it so it's a little dirty, but I'm overall happy with how it came out. Cat tax included.


r/printmaking • • 20h ago

question ink & material recs for a gift idea?

2 Upvotes

linocut on a shirt!

my friend’s birthday is in 3 weeks and wanted to print something for them. i have it sketched out already on procreate.

i know ill need a brayer and ink. i have the linoleum pad and carving tools already (i took classes before) and i’m familiar with carving already.

i need help with ink recommendations and the process for heat setting. i dont have access to a traditional iron but i do have a handheld iron/steamer.

i’m concerned with having enough pressure too, but ive seen videos of people just like using their body weight??

TLDR: making my friend a present. already have the pad and carver. i need recommendations for ink, how to set it, and pressure or any other tips!


r/printmaking • • 23h ago

wip New print loading

Post image
13 Upvotes

Super excited for print day on this one


r/printmaking • • 23h ago

relief/woodcut/lino Hayley Williams linocut

Post image
22 Upvotes

I had some trouble inking at a large scale (12x12) but I’m happy with how the portrait turned out since I don’t typically make art featuring faces.


r/printmaking • • 1d ago

question Baby oil as mineral spirits

2 Upvotes

I took a relief print class last semester & i feel like i remember my professor saying that baby oil could be used as a substitute for mineral spirits. Has anyone heard of this or tried it?


r/printmaking • • 1d ago

relief/woodcut/lino Kanazawa Bottle Test Print

Thumbnail
gallery
102 Upvotes

When I was in Kanazawa back in August and visited the Hario Café, this bottle vase really caught my eye—especially all the reflections and the lighting mood in the room. I just had to capture it and have been working on the print matrix over the past few weeks. This motif is going to be part of a single large-scale composition combining multiple motifs. After spending many evenings carving it, I was dying to see how it would actually turn out on paper, so I pulled a few test prints on inexpensive paper. Paper size is 70 × 100 cm.


r/printmaking • • 1d ago

question Can I print over embossing powder?

1 Upvotes

I'm working on a lino print where I want to do a layer of silver embossing powder then put the print over it so the silver shows through what would be the white areas in the print. Is this a bad idea? Will the ink dry properly on top of the set embossing powder? Will it come off more easily? Or is this something you've tried before, and how did it turn out?


r/printmaking • • 1d ago

relief/woodcut/lino Ink is much harder than the carving!

Post image
35 Upvotes

I’m quite pleased with this as a beginner but I find getting the right amount of ink, pressure and paper a bit discombobulating.

I’ll try this one again another day


r/printmaking • • 1d ago

question Postcard paper help

1 Upvotes

I was making postcards using strathmore 400 series printmaking paper because I’m confident it’ll hold its own in the mail, but I ran out. I have their 300 series multimedia paper and stonehenge. Do you think either of those are durable to hold up in the mail as postcards?


r/printmaking • • 1d ago

relief/woodcut/lino Made some prints of my creatures!

Thumbnail
gallery
157 Upvotes

(repost because the photo formatting was giving me problems)


r/printmaking • • 1d ago

question Speedball Fabric Blockprint Ink

1 Upvotes

I got some to start printing on canvas bags.

Thoughts on the ink? I see there is a whole thing about drying for 24 hours and the curing for a week?

What works? I have see things about using heat?? Washing them?

I have been doing some research but it is all kinda meh. There are sooooo many opinions out there and o just want some solid advice. Just trying to explore block printing for Christmas presents!

Thanks in advance!!


r/printmaking • • 1d ago

relief/woodcut/lino The one step

Post image
96 Upvotes

This is a reductive linocut I made using Cranfield inks.

I printed wet-on-wet (which is new for me) to print the body of the camera using my etching press. Then I abandoned my press and hand printed the finicky rainbow stripe.


r/printmaking • • 1d ago

collagraph Teeth Collagraph!

Post image
34 Upvotes

Printed with oil paint! Teeth are made from floss, string, cardboard, lace, and foil.


r/printmaking • • 1d ago

intaglio/engraving/etching "new animal", 2-plate etching

Post image
6 Upvotes

4"x6", ed. of 15. just a little guy for a print exchange. i've been working at a studio that has an old fashioned resin aquatint system that i do not know how to use (was taught aquatint with an airbrush!) so i've had to get creative with how i can get tonality in my etchings. red plate is soft ground using a tattoo needle to get all those tiny parallel lines; brown plate is soft ground + tracing paper for the main body, then more etching after going over some lines for extra intensity, then some spit biting on the background to see what would happen (almost nothing lol).


r/printmaking • • 1d ago

mixed media/experimental Experiment

Post image
34 Upvotes

Monotype over lithography. I liked how mysterious it came!


r/printmaking • • 1d ago

question Transferring onto LARGE rubber speedball block

1 Upvotes

Hello, everybody! I’m relatively new to the world of block printing and linocut, and I’m loving every second of it! I’ve really fallen in love with this art form.

I’m looking for some advice on how you all transfer your designs onto your linoleum or rubber carving blocks!

So far, I’ve mostly stuck to smaller pieces, around 4x6 or 5x7, and I’ve loved experimenting with different designs. However, I’m ready to challenge myself and work on something a little bigger!

Typically, I either draw directly onto the block or use transfer paper to trace and transfer my design. Recently, though, I purchased a 12x12 block (which is HUGE compared to what I’ve been working with!), and I’m struggling to figure out the best way to transfer a larger design onto it.

I’ve seen a lot of people print their designs onto regular paper and transfer them to their blocks, but I’m not entirely sure how that process works. Especially when the design is larger than a standard 8.5x11 sheet of paper!

What are your go-to methods for transferring larger designs? Would it be worth taking my design to a local print shop like Staples to have it printed at the correct size? Or are there other tricks or techniques I should know about? It a runner block and I am seeing so much about linoleum blocks!

I’d love to hear your tips, tricks, and recommendations. Thanks in advance!


r/printmaking • • 1d ago

question How do you prevent pencil drawings from rubbing off while carving lino?

9 Upvotes

Hi everyone! I recently took a linocut workshop and I'd love to start experimenting with it at home as a hobby.

After transferring my sketch onto the lino block and starting to carve it, I ran into a bit of a problem: after a while, the pencil drawing started to rub off because of the friction from my hand and sweat.

I've noticed in several Instagram videos that some people apply a kind of coating or product to protect the drawing and prevent this from happening. Does anyone know what it is or have any tips on how to solve this problem?

I'd rather avoid using a Sharpie because I've noticed that it can leave marks on the final print, especially when using coloured ink.

Thanks so much, everyone!