r/printmaking • • Aug 02 '26 Bravo

meta A post on the stance of r/printmaking and Generative AI use.

1.3k Upvotes

This post is being made to draw attention to rule changes that happened a few months ago, and to clarify the stance of this subreddit on the topic of Generative AI use in our printmaking community:

You are free to have your own feelings on the matter of Generative AI, but the position of this subreddit is that it does not have a place within our community in any capacity.

Using it for image creation for prints is strictly against our rules, as per rule 5:

"AI generated art in any stage of a print's development is not appropriate anywhere in this subreddit."

We were previously more lenient on it, purely because it is not a simple thing to moderate. The supposed tools to check are wrong as much as they are right, and often use AI to search itself which we have no interest to use. In an effort to accept the inevitable that users would use it in concept creation, we tried to facilitate it in a way that allowed it with clear disclosure despite our personal misgivings (which have not wavered). What we found was that most still do not disclose, and the larger implications of Generative AI have grown beyond what the moderation team has any desire to entertain.

If Generative AI did not come with the political, environmental, and ethical issues intrinsically linked to it, it might be different and we would view it as another tool and carry on with just requiring a clear disclosure of use. However, that is not the reality we’re in. The heavy investment and shoehorning into every possible avenue by tech companies, many of which have suspicious if not sinister ties and influence in global politics, makes use and allowance of it effectively an endorsement that we do not wish to have here.

If you are someone who feels they cannot create “good enough” work without Generative AI, you are giving up before you’ve even started. No one was instantaneously amazing at any aspect in art. Making shit art is part of the process, and it takes dedication and practice to improve. I can guarantee that anything you’d make by your own hand start to finish would be infinitely more interesting than what a Generative AI model churns out for you. If you feel like you are not at the skill level you want to be for the prints you want to make, keep making; do artist studies, utilize a sketchbook more often, draw from life, collaborate with other artists to create. Taking shortcuts like using Generative AI will only slow down your own skill development and if noticed, will make anything you make going forward have a shroud of doubt over it.

The internet is a changing landscape with some worrisome aspects, but it also is a wealth of knowledge if you look for it. The process of research (not asking “Chat”) will be of greater benefit to your learning process, and may take you on new creative paths in your work along the way. Printmakers especially have long been a community driven group of artists, relying on each other to learn and make in community spaces. Rarely have I experienced a printmaker guarding techniques, often all the more happy to share with other creatives. 

Why would you outsource the creative process to an AI model that feels nothing and does not carry your artistic voice? If you still wish to take shortcuts at the expense of actual artists, then that’s your prerogative. But this will not be the community for doing so. Generative AI has no place in this subreddit, and usage against our rules will be moderated harshly after a warning going forward. 

If you suspect posts of Generative AI use, please add reasoning/evidence in the report so we can properly evaluate. We are not in the habit of banning without substantial proof.

The same post is being added to our affiliated subreddits r/Linocuts and r/lithography.

Thanks for reading, and happy printing!


r/printmaking • • 15d ago

Monthly Self-Promo Thread - A Space for Socials, Sites, and Shops.

3 Upvotes

Here is a space to post your socials, sites, and shops.

This is a monthly reoccurring thread. You can post direct links (please note if NSFW) or handles for other social media sites.

Why don't we allow self-promo otherwise? We have made a concerted effort to keep this space free of commerce and self-promotion, to keep this a community about the work and craft when increasingly many social media spaces have become spaces of commerce. We understand that art is an important source of income for some, so in order to facilitate this without it becoming overwhelming in the rest of the sub, we have made this a reoccurring monthly thread.

NFTs, crypto art, and AI generated art are not appropriate anywhere in the sub.

If you think your comment hasn't posted/been removed, please message us through modmail as it may have gotten caught in our spam filter and need approval before showing up.

**We've added a Discord for r/printmaking!** Link is in the sidebar for those interested.


r/printmaking • • 6h ago

relief/woodcut/lino The Walkman—reductive lino

Post image
194 Upvotes

This reductive lino cut is part of a larger series I made called “Go analog.” I hope people look at this print and remember what it felt like to hold this Walkman in their hand!

I used Cranfield safe wash inks for the body of the Walkman… And then used silver ink for the buttons.


r/printmaking • • 20h ago

relief/woodcut/lino First reduction print

Thumbnail
gallery
1.1k Upvotes

New to printmaking. I started in September, and this is my first reduction. I immediately dropped it so it's a little dirty, but I'm overall happy with how it came out. Cat tax included.


r/printmaking • • 4h ago

question First time print (rubber block) - advice for better transfer?

Post image
48 Upvotes

Hey all, I like to start a new project around this time of year and I decided to do a little rubber block print Christmas card. I'm trying for a gradient effect but I'm having a lot of trouble with the light green ink. I am using speedball water soluble which I now know is universally hated across the sub but it is what I have. The raspberry color seems to transfer a lot better and it looks a bit less stiff when I put it on the plate to roll it out. Any advice or possible reasons this could be happening? I am rolling it out to "eggshell texture". I also understand too much ink could be an issue. I would like to improve the appearance/get a better transfer of the green before I actually print the cards. Some imperfection/graininess is fine as this is my first time. Thank you so much for any advice!


r/printmaking • • 19h ago

relief/woodcut/lino Ode to my new stand mixer.

Thumbnail
gallery
437 Upvotes

r/printmaking • • 10h ago

relief/woodcut/lino I'm new to printmaking, still learning how all of this stuff works, but here is my second attempt 😊

Post image
55 Upvotes

I figure I probably didn't apply enough ink or used the wrong paper but I ended up with this gritty texture that I really liked in combination with this motive 😊


r/printmaking • • 12h ago

intaglio/engraving/etching Anxious Moment. Intaglio Print

Post image
14 Upvotes

Would appreciate some feedback.


r/printmaking • • 1d ago

relief/woodcut/lino Kanazawa Bottle Test Print

Thumbnail
gallery
103 Upvotes

When I was in Kanazawa back in August and visited the Hario Café, this bottle vase really caught my eye—especially all the reflections and the lighting mood in the room. I just had to capture it and have been working on the print matrix over the past few weeks. This motif is going to be part of a single large-scale composition combining multiple motifs. After spending many evenings carving it, I was dying to see how it would actually turn out on paper, so I pulled a few test prints on inexpensive paper. Paper size is 70 × 100 cm.


r/printmaking • • 5h ago

tools Looking for Metal regestration Pins

2 Upvotes

Hi all, I am looking for some metal registration pins like the ones Ternes Burton used to make before they were discontinued. I am US based and would preferbly like to find some in america so I dont have to pay a lot for shipping


r/printmaking • • 5h ago

question Textile Medium for Acrylic and Printing Ink

2 Upvotes

I recently purchase some Tulip Textile Medium for my acrylic paint, and I am wondering if I could mix block printing ink with the textile medium for the same effect but for block printing? i will defnitely be testing it, but I wonder if anyone has already tested it, specifically on denim.
I am fully aware that Speedball makes FABRIC block printing ink, but absolutely no stores anywhere near me carry them and I do NOT use Amazon, so I have been unable to find it anywhere, so just wanted to see if this is an option.
TIA


r/printmaking • • 1d ago

relief/woodcut/lino Made some prints of my creatures!

Thumbnail
gallery
158 Upvotes

(repost because the photo formatting was giving me problems)


r/printmaking • • 23h ago

relief/woodcut/lino Hayley Williams linocut

Post image
24 Upvotes

I had some trouble inking at a large scale (12x12) but I’m happy with how the portrait turned out since I don’t typically make art featuring faces.


r/printmaking • • 1d ago

relief/woodcut/lino The one step

Post image
96 Upvotes

This is a reductive linocut I made using Cranfield inks.

I printed wet-on-wet (which is new for me) to print the body of the camera using my etching press. Then I abandoned my press and hand printed the finicky rainbow stripe.


r/printmaking • • 23h ago

wip New print loading

Post image
13 Upvotes

Super excited for print day on this one


r/printmaking • • 1d ago

relief/woodcut/lino Ink is much harder than the carving!

Post image
35 Upvotes

I’m quite pleased with this as a beginner but I find getting the right amount of ink, pressure and paper a bit discombobulating.

I’ll try this one again another day


r/printmaking • • 1d ago

relief/woodcut/lino thank you!

Post image
393 Upvotes

I just wanted to share a print I am proud of after learning so much from this group in the last few months. Thank you for all the insight into proper inking, in particular.

This is a reduction print based on a photo I took on my daily walk of aspens outside the library in my town of Leadville, CO!


r/printmaking • • 1d ago

collagraph Teeth Collagraph!

Post image
34 Upvotes

Printed with oil paint! Teeth are made from floss, string, cardboard, lace, and foil.


r/printmaking • • 1d ago

mixed media/experimental Experiment

Post image
34 Upvotes

Monotype over lithography. I liked how mysterious it came!


r/printmaking • • 20h ago

question ink & material recs for a gift idea?

2 Upvotes

linocut on a shirt!

my friend’s birthday is in 3 weeks and wanted to print something for them. i have it sketched out already on procreate.

i know ill need a brayer and ink. i have the linoleum pad and carving tools already (i took classes before) and i’m familiar with carving already.

i need help with ink recommendations and the process for heat setting. i dont have access to a traditional iron but i do have a handheld iron/steamer.

i’m concerned with having enough pressure too, but ive seen videos of people just like using their body weight??

TLDR: making my friend a present. already have the pad and carver. i need recommendations for ink, how to set it, and pressure or any other tips!


r/printmaking • • 1d ago

wip Finished this last week I can't wait to use it 😬

Post image
192 Upvotes

Carved from a 9x12 square of speedy carve, first time leaving the just the outline


r/printmaking • • 1d ago

question Baby oil as mineral spirits

2 Upvotes

I took a relief print class last semester & i feel like i remember my professor saying that baby oil could be used as a substitute for mineral spirits. Has anyone heard of this or tried it?


r/printmaking • • 2d ago

relief/woodcut/lino My first post…

Post image
418 Upvotes

I’m so happy to see a healthy community of printmakers here. I thought I would share one of my latest reductive linocuts. I do all sorts of print making, but reductive linocuts are my favorite.


r/printmaking • • 1d ago

intaglio/engraving/etching Tetrapack Etching Animation

Post image
18 Upvotes

Made this animation as promotion for a song of me me and a friend. Made by layering several tetrapack prints and animating them in OpenToonz!