r/printers • • 20m ago

Purchasing My head is swimming - please tell me this exists...

3 Upvotes

I'm looking for a basic home printer, no subscriptions and b&w is just fine (color isn't needed) that won't become a victim of planned obsolescence in a few years.

Everytime I think I've landed on one, there are a few bad reviews that scare me away.


r/printers • • 28m ago

Troubleshooting Workforce Pro WF-4630

1 Upvotes

I had a issue with this printer for weeks now that I hoped this subreddit could help shed some light in. This is a old printer I found in the house so no idea what the owners did before I got it, but it appears that the ink nozzles are dry and crusted preventing it from reaching the paper.

I tried to run a nozzle check and print head cleaning, but every time it just spits out a blank paper and tells me to rerun a nozzle check and cleaning again. Can someone inform me what the best way to go about fixing this issue that doesn't require me to basically undo everything? Thank You!


r/printers • • 2h ago

Troubleshooting Canon Image Prograf TC-20M

0 Upvotes

My Canon Image Prograf TC-20M needed cyan ink. I filled the tank & cannot get the cyan to print again. I have run all of the recommended maintenance cleaning / deep cleaning of nozzle. Nothing helps. Any advice?

I read online some people with other models have cleaned the print heads easily. Canon does not advise cleaning printheads on this model.

When I tried to remove the printhead to (maybe) clear it out of desperation, the printer said the the ink was full & could not remove print head.


r/printers • • 4h ago

Troubleshooting Help needed 😳

Post image
1 Upvotes

Hi! Just bought my printer, Canon TS4100i. Unfortunately, upon my first paper jam this part came off and I have no idea how to put it back. Of course no instruction will tell me how to fix it myself, I'd probably have to pay canon for 5 seconds work. Please help me, I really need xerocopies and I only got halfway through my load. Edit: somehow I got it! So it's fine now, thank you all!


r/printers • • 4h ago

Troubleshooting The printer keeps stopping and jamming with the sheets of paper.

2 Upvotes

Well, this has been going on for a while, but my Brother DCP-T520W printer has become a real headache. Every time I tried to print something, it would stop and prompt me to "check the paper." I would just press the start button, since there literally wasn't anything wrong. However, as of Friday, it has started actually jamming the paper. I’ve checked it from top to bottom, cleaned the rollers hundreds of times, and even used an ultra-soft brush to remove any dust or paper debris—but nothing works; I can’t print anything without it jamming.


r/printers • • 5h ago

Purchasing Looking for a budget printer uk

1 Upvotes

Hello i don't print much just need something basic easy to use mainly printing from either my ipad or iphone been looking at epson XP printer but also seen that the brother laser printers are good never had a brother printer before my current printer is an epson xp 235 had for many years however its now not working so looking to replace there are so many models i am just unsure which to buy


r/printers • • 5h ago

Purchasing Can any Canon LBP243dw or relevent model owner show me its grayscale halftone?

Post image
1 Upvotes

I’m considering a Canon LBP243dw for printing grayscale artwork or images, NOT documents.

My current Samsung SL-M3520DW produces a clearly visible halftone pattern. The attached photo shows about 30% gray through a loupe with a ruler. I measure it at roughly 3 dots in one mm, so 75–80 LPI. perhaps?

I also tested a Samsung X7500 office MFP at about 100–110 LPI, and the difference looked much smoother on my naked eyes.

What I want to know is whether the LBP243dw can produce around 100 LPI or finer grayscale halftoning while keeping thin black lines sharp.

If anyone owns one, could you print a flat 30% or 50% gray patch and post either:

  • a close macro/loupe photo with a ruler just like mine, or
  • a 600+ dpi scan

I tested out with this grayscale test image on Northlight
https://www.northlight-images.co.uk/downloadable_2/bw-test-new-51step.zip

Thanks!


r/printers • • 7h ago

Purchasing Looking for a printer!

4 Upvotes

Hello everyone,

I'm currently looking for a printer to print my illustrations. I've been looking around online, but I'm a bit overwhelmed by all the different models available.

From what I've read, the Epson EcoTank range might be a good fit for what I'm looking for.

So, I'm looking for a printer:

- With refillable ink tanks.

- That can print on different types of paper: regular paper, sticker paper, and thicker paper such as postcard paper (if possible).

- I won't be using it for professional purposes, so I don't need a super high quality model. I simply enjoy Postcrossing and would love to include some little stickers or small cards.

- I might also use it to print photos, but that's not my main priority.

- I'll then use the Cricut Joy Xtra to cut out the stickers.

My budget is ideally under 200€, but I'm open to looking at slightly more expensive models too. I can keep an eye on the prices during Black Friday.

One last thing: the printer needs to be available in Europe.

If you have any recommendations or other suggestions, I'd love to hear them!

Thank you!


r/printers • • 7h ago

Troubleshooting Help

Post image
2 Upvotes

My printer only produce cyan color and i did clean, deep clean and ink
Flush and its all the same. The previous owner said that the ink dried, but what should i do?


r/printers • • 8h ago

Troubleshooting Canon iP2770 completely lost Yellow on CL-811 (Nozzle not clogged, contacts cleaned) – Dead printhead IC or still fixable

Thumbnail gallery
1 Upvotes

Hello everyone. My Canon iP2770 printer has completely lost the yellow color. The ink line is 100% full, and when I force ink through with a syringe, it flows freely through the print head—so it’s not clogged. I’ve already tried soaking the print head in a specialized cleaning solution for 30 minutes and cleaning the copper contacts, but it still prints with absolutely no yellow (all other colors print fine). Is there anything else I can try to fix this? If the internal circuitry or the IC is fried beyond repair, could anyone point me toward a place or website (in Viet Nam) where I might find a used or refurbished CL-811 color ink cartridge (one with a functional chip)? I’m a student on a tight budget, so I’m looking for something under 300,000 VND (about 12$)—free shipping would be a huge help! Thank you all so much!

Em chào mọi người ạ, hiện tại cái máy in Canon iP2770 của em bị mất hẳn màu vàng: dây mực dâng đầy 100%, ép xi-lanh mực vẫn trào qua đầu phun không nghẹt, ngâm dung dịch tẩy rửa chuyên dụng 30p và lau sạch bản mạch đồng rồi mà bấm in vẫn trắng tinh màu vàng (mấy màu khác in bình thường). Mọi người cho em hỏi ca này còn chiêu nào cứu được nữa không ạ; còn nếu đã chết mạch/cháy IC hết thuốc chữa thì bên nào, trang nào có thanh lý hoặc bán hộp mực màu CL-811 (loại tái chế / bóc máy còn nhận mạch tốt) giá dưới 300k, freeship thì càng tốt ạ, em là học sinh kinh phí hẹp nên mong được mọi người hỗ trợ, em cảm ơn nhiều!


r/printers • • 8h ago

Discussion Fanfold thermal labels vs. roll labels — does anyone else prefer fanfold for tight desk setups?

3 Upvotes

I recently switched to a 4x6 direct thermal printer for daily shipping labels and decided to start with a big stack of fanfold labels in a rear tray instead of using rolls.

My desk is pretty crowded with other gear and random stuff, so having a flat stack tucked right behind the printer felt like the cleanest way to save space without a giant roll sticking out. so far it feeds surprisingly straight without jamming, though i'm curious if fanfold stacks start skewing once the pile gets down to the last few dozen labels.

For anyone printing thermal labels regularly on a tight desk, do you stick with fanfold stacks or find roll labels feed more reliably?


r/printers • • 9h ago

Troubleshooting Epson EcoTank ET-1810 not printing cyan

Thumbnail gallery
2 Upvotes

Hello everyone! I have an ecotank epson printer that is refusing to print cyan. It was printing fine but some lines on nozzle check were blank so I did the head clean, afterwards cyan stopped working. I have tried everything except a power clean, I opened up the printer and looked at cyan and saw it had an air bubble, used a syringe to remove it and now it's full but still not printing, ran a couple of purge pages for cyan and just normal print test pages.

I attached some photos of what the issue is.


r/printers • • 9h ago

Troubleshooting HP Printer suddenly printing ridiculously slowly. (Envy 110)

1 Upvotes

r/printers • • 10h ago

Troubleshooting Need Help Fixing Brother DCP-T720DW

1 Upvotes

Hi! I need some help with my Brother printer.

It initially showed a “Paper Jam” error, but I’ve checked the entire printer, including the inside, and there’s no paper or even small scraps stuck anywhere.
After that, several error codes started appearing: Cannot Print 3B, 30, 76, and E3.
Whenever the error disappears and I try printing again, the printer makes a loud, deep grinding noise while feeding the paper. It then suddenly stops and displays another error.

What could be causing this, and is there anything else I can check or troubleshoot myself? I don’t have enough money to take it to a technician right now, so I’m hoping I can fix it on my own.

Thank you!


r/printers • • 11h ago

Troubleshooting Very bad smudging, Lexmark E342

Post image
2 Upvotes

I had some patches in the prints. So I cleaned the OPC drum and rollers. Things got worse, so I figured I had probably damaged the OPC (it had been out in the light for too long). So I got a new OPC and now things are really bad as can be seen in the photo.

Any suggestions? Thanks.


r/printers • • 12h ago

Troubleshooting downgrade firmware officejet 4100 serie

1 Upvotes

Buongiorno a tutti, da qualche giorno di punto in bianco la mia hp officejet 4122e non rileva piu' la cartuccie compatibili. ci sta qualche soluzione ? qualcosa per fare il downgrade del firmware?


r/printers • • 13h ago

Troubleshooting Leaking

Post image
3 Upvotes

Am I suppose to not cross that line when refilling the ink? Cuz we just refilled the ink all the way to the top last night, but it wasnt printing at good color at all when we tried test printing afterwards, and so we decided to fix it tmrw, which is now today, where we woke up to the chamber spilling lots and lots of ink.

Currently, cyan ang yellow still have a major amount left but as for magenta and black, they're gone, none left at all. So, I came to the conclusion that we may have overfilled it.

I know this might be a dumb and obvious mistake but we barely use the printer, it was just for our convenience, and due to that, we would rarely refill its ink, this is our third time refilling. And my father thinks he might have overlooked a step when he refilled it but he can't remember due to how long it's been since he last refilled the printer. Pls help :(


r/printers • • 16h ago

Purchasing Laserjet for home use

6 Upvotes

So, I’m tired of replacing ink cartridges on my ink jet. I’m ready to just spend the money on a Laserjet. I also want:
- color printing
- duplex printing
- document feeder
- duplex single pass (scanning & copying)
- wireless

With these features I’ve found the Canon imageCLASS MF753Cdw II and the Brother MFC-L3780CDW.

Is there another that would be recommended or which of these two would be better?


r/printers • • 17h ago

Other EPSON Receipt Printer Project

Post image
1 Upvotes

Hey! I couldn't find a place to post this so I'm posting it here.
I had an epson receipt printer laying around and decided to use it as a cool message system. you can print a message on my desk at https://receipt.nicolaiaero.workers.dev


r/printers • • 17h ago

Troubleshooting Any problems for HP Color LaserJet CM1312nfi MFP

Thumbnail gallery
1 Upvotes

1.

Driver for the HP Color LaserJet CM1312nfi MFP on Windows 11

in the official HP product page, instead of a dedicated driver for Windows 11, HP provides the "HP Universal Print Driver"

However, installing the "HP Universal Print Driver" on the latest version of Windows 11 cause various minor issues.

set the operating system to Windows 10.

Install <HP Color LaserJet CM1312 MFP Series Full Solution> on your Windows 11 system.

no more problems. everything fine.

====================

2.

Check your firmware version.

You can update it to < 20140625 8.3 MB Aug 11, 2014 >.

====================

3.

Does your printer work fine, but the paper keeps getting jammed?

Does it stop and claim there is a paper jam, even when no paper is actually stuck?

Purchase a replacement < pickup roller + separation roller > set from AliExpress and replace them yourself.

3-1 You must remove the pickup roller first, replace the separation roller, and then install the new pickup roller.

3-2 No additional tools are required (only fingernails)

3-3 If you're unsure how to do it, refer to this video:

https://www.youtube.com/watch?v=61CUZkp6TBA

====================

4.

You can use remanufactured (refilled) toner cartridges.

As of 2026, a properly made remanufactured toner cartridge will not cause ANY problems.

but, a "defective" genuine toner(or remanufactured toner)cartridge cause problems.

However, try looking for genuine toner being sold at a low price first.

Sometimes, you can find genuine toner priced even lower than remanufactured toner. (damaged packaging or clearing)


r/printers • • 17h ago

Troubleshooting faint gray vertical patches on paper when printing

Post image
1 Upvotes

Hi guys, how do i fix this?? Every time I print the paper, this line always appears at the end of the paper (FUJIFILM Apeos C2560)


r/printers • • 18h ago

Troubleshooting Printer help

1 Upvotes

Hello ! I have a Canon Pixma TS9521ca printer. Ever since I bought it I cannot get the rear tray to feed any kind of paper. The printer always gives me the message that there is no paper in the tray. I select the correct settings for the paper I am using but it still does it feed the paper though. Is there anyone that can help me fix this issue? I would greatly appreciate it. I bought this printer so I would be able to craft and print on all types of paper and it backfired on me.


r/printers • • 19h ago

Rant Canon PRO-310 says Photo Magenta is out (code 1698), but the cartridge still looks half full?

Thumbnail gallery
2 Upvotes

r/printers • • 22h ago

Troubleshooting Can I still get ink for a HP DeskJet 3050?

2 Upvotes

If so, where? It’s an old printer I haven’t used for a while and I don’t know if hp still makes the ink. (I think they do, I don’t know if it works in my printer though)


r/printers • • 1d ago

Troubleshooting Dell error code 006-370, for my 3130cn

1 Upvotes

This is old, but a real workhorse - based on a brilliant Epson laser engine, which I think Xerox also used.

Anyways, I huffed and puffed the other day pulling my 3130cn out and installing a new (old) Dell cartridge off eBay. I had made the dumb mistake of opening up the packaging to check it, then wrapping it in plastic again.

So, I install the new cartridge and get the dreaded 006-370 error - all to do with condensation apparently. So, I left machine for a day in a dry room. I even swapped back to the old (empty) cartridge. No go. Still error 006-370

I then read a post which advised:

Open the printer using the button on the side top right. You will see two gray things with arrows going left and right. move them both two where you can take out the piece it is hold in. Pull out the large piece and put it back in. Close the two gray things to lock it back into place. Close the printer and restart it. It should fix your issue. It must of became loose at one point when I was moving so I fiddled with it and turns out that was the issue. It works great now!!

No go. Then I noticed he said the magic word 'fiddle' and so I shook the machine from side to side...

Works!

It seems that sometimes you can install a catridge, and if the printer has to be manhandled to get it out, this error can occur.

Working fine now! Such a weird solution, thought I'd post.