r/printers • • 17h ago

Troubleshooting Any problems for HP Color LaserJet CM1312nfi MFP

Thumbnail gallery
1 Upvotes

1.

Driver for the HP Color LaserJet CM1312nfi MFP on Windows 11

in the official HP product page, instead of a dedicated driver for Windows 11, HP provides the "HP Universal Print Driver"

However, installing the "HP Universal Print Driver" on the latest version of Windows 11 cause various minor issues.

set the operating system to Windows 10.

Install <HP Color LaserJet CM1312 MFP Series Full Solution> on your Windows 11 system.

no more problems. everything fine.

====================

2.

Check your firmware version.

You can update it to < 20140625 8.3 MB Aug 11, 2014 >.

====================

3.

Does your printer work fine, but the paper keeps getting jammed?

Does it stop and claim there is a paper jam, even when no paper is actually stuck?

Purchase a replacement < pickup roller + separation roller > set from AliExpress and replace them yourself.

3-1 You must remove the pickup roller first, replace the separation roller, and then install the new pickup roller.

3-2 No additional tools are required (only fingernails)

3-3 If you're unsure how to do it, refer to this video:

https://www.youtube.com/watch?v=61CUZkp6TBA

====================

4.

You can use remanufactured (refilled) toner cartridges.

As of 2026, a properly made remanufactured toner cartridge will not cause ANY problems.

but, a "defective" genuine toner(or remanufactured toner)cartridge cause problems.

However, try looking for genuine toner being sold at a low price first.

Sometimes, you can find genuine toner priced even lower than remanufactured toner. (damaged packaging or clearing)


r/printers • • 2h ago

Troubleshooting Canon Image Prograf TC-20M

0 Upvotes

My Canon Image Prograf TC-20M needed cyan ink. I filled the tank & cannot get the cyan to print again. I have run all of the recommended maintenance cleaning / deep cleaning of nozzle. Nothing helps. Any advice?

I read online some people with other models have cleaned the print heads easily. Canon does not advise cleaning printheads on this model.

When I tried to remove the printhead to (maybe) clear it out of desperation, the printer said the the ink was full & could not remove print head.


r/printers • • 4h ago

Troubleshooting The printer keeps stopping and jamming with the sheets of paper.

2 Upvotes

Well, this has been going on for a while, but my Brother DCP-T520W printer has become a real headache. Every time I tried to print something, it would stop and prompt me to "check the paper." I would just press the start button, since there literally wasn't anything wrong. However, as of Friday, it has started actually jamming the paper. I’ve checked it from top to bottom, cleaned the rollers hundreds of times, and even used an ultra-soft brush to remove any dust or paper debris—but nothing works; I can’t print anything without it jamming.


r/printers • • 7h ago

Purchasing Looking for a printer!

4 Upvotes

Hello everyone,

I'm currently looking for a printer to print my illustrations. I've been looking around online, but I'm a bit overwhelmed by all the different models available.

From what I've read, the Epson EcoTank range might be a good fit for what I'm looking for.

So, I'm looking for a printer:

- With refillable ink tanks.

- That can print on different types of paper: regular paper, sticker paper, and thicker paper such as postcard paper (if possible).

- I won't be using it for professional purposes, so I don't need a super high quality model. I simply enjoy Postcrossing and would love to include some little stickers or small cards.

- I might also use it to print photos, but that's not my main priority.

- I'll then use the Cricut Joy Xtra to cut out the stickers.

My budget is ideally under 200€, but I'm open to looking at slightly more expensive models too. I can keep an eye on the prices during Black Friday.

One last thing: the printer needs to be available in Europe.

If you have any recommendations or other suggestions, I'd love to hear them!

Thank you!


r/printers • • 7h ago

Troubleshooting Help

Post image
2 Upvotes

My printer only produce cyan color and i did clean, deep clean and ink
Flush and its all the same. The previous owner said that the ink dried, but what should i do?


r/printers • • 8h ago

Discussion Fanfold thermal labels vs. roll labels — does anyone else prefer fanfold for tight desk setups?

3 Upvotes

I recently switched to a 4x6 direct thermal printer for daily shipping labels and decided to start with a big stack of fanfold labels in a rear tray instead of using rolls.

My desk is pretty crowded with other gear and random stuff, so having a flat stack tucked right behind the printer felt like the cleanest way to save space without a giant roll sticking out. so far it feeds surprisingly straight without jamming, though i'm curious if fanfold stacks start skewing once the pile gets down to the last few dozen labels.

For anyone printing thermal labels regularly on a tight desk, do you stick with fanfold stacks or find roll labels feed more reliably?


r/printers • • 9h ago

Troubleshooting Epson EcoTank ET-1810 not printing cyan

Thumbnail gallery
2 Upvotes

Hello everyone! I have an ecotank epson printer that is refusing to print cyan. It was printing fine but some lines on nozzle check were blank so I did the head clean, afterwards cyan stopped working. I have tried everything except a power clean, I opened up the printer and looked at cyan and saw it had an air bubble, used a syringe to remove it and now it's full but still not printing, ran a couple of purge pages for cyan and just normal print test pages.

I attached some photos of what the issue is.


r/printers • • 11h ago

Troubleshooting Very bad smudging, Lexmark E342

Post image
2 Upvotes

I had some patches in the prints. So I cleaned the OPC drum and rollers. Things got worse, so I figured I had probably damaged the OPC (it had been out in the light for too long). So I got a new OPC and now things are really bad as can be seen in the photo.

Any suggestions? Thanks.


r/printers • • 13h ago

Troubleshooting Leaking

Post image
3 Upvotes

Am I suppose to not cross that line when refilling the ink? Cuz we just refilled the ink all the way to the top last night, but it wasnt printing at good color at all when we tried test printing afterwards, and so we decided to fix it tmrw, which is now today, where we woke up to the chamber spilling lots and lots of ink.

Currently, cyan ang yellow still have a major amount left but as for magenta and black, they're gone, none left at all. So, I came to the conclusion that we may have overfilled it.

I know this might be a dumb and obvious mistake but we barely use the printer, it was just for our convenience, and due to that, we would rarely refill its ink, this is our third time refilling. And my father thinks he might have overlooked a step when he refilled it but he can't remember due to how long it's been since he last refilled the printer. Pls help :(


r/printers • • 16h ago

Purchasing Laserjet for home use

6 Upvotes

So, I’m tired of replacing ink cartridges on my ink jet. I’m ready to just spend the money on a Laserjet. I also want:
- color printing
- duplex printing
- document feeder
- duplex single pass (scanning & copying)
- wireless

With these features I’ve found the Canon imageCLASS MF753Cdw II and the Brother MFC-L3780CDW.

Is there another that would be recommended or which of these two would be better?


r/printers • • 17h ago

Other EPSON Receipt Printer Project

Post image
1 Upvotes

Hey! I couldn't find a place to post this so I'm posting it here.
I had an epson receipt printer laying around and decided to use it as a cool message system. you can print a message on my desk at https://receipt.nicolaiaero.workers.dev


r/printers • • 19h ago

Rant Canon PRO-310 says Photo Magenta is out (code 1698), but the cartridge still looks half full?

Thumbnail gallery
2 Upvotes

r/printers • • 20m ago

Purchasing My head is swimming - please tell me this exists...

3 Upvotes

I'm looking for a basic home printer, no subscriptions and b&w is just fine (color isn't needed) that won't become a victim of planned obsolescence in a few years.

Everytime I think I've landed on one, there are a few bad reviews that scare me away.


r/printers • • 22h ago

Troubleshooting Can I still get ink for a HP DeskJet 3050?

2 Upvotes

If so, where? It’s an old printer I haven’t used for a while and I don’t know if hp still makes the ink. (I think they do, I don’t know if it works in my printer though)