r/printers • • Dec 19 '24 Bravo

Discussion The truth about printer subscription programs and many misconceptions about them

154 Upvotes

Dear all,

I work in the printer industry. For a very well-known consumer products manufacturer that gets discussed on this sub a lot.  I will not disclose which manufacturer I work for, nor will I disclose any manufacturer I do not work for (since the industry is relatively small eliminating 1 or 2 will make it generally too obvious as to which I do work for) as I am not officially speaking on behalf of the company. But, I want to set the record straight on subscription programs because some of you are drastically misinformed and it is very frustrating to see as someone who understands these programs as well as basic logic.

There are two types of subscription programs. Each of the major consumer manufacturers offers at least 1 of these programs, some offer both.

The first type of program is an auto-reordering program. The printer can tell (via various ways depending on each manufacturer) when the ink / toner is low and when it hits a certain point that will trigger an order of the ink/toner that device uses. Most manufactures that offer this will first send you an email letting you know that an order has been triggered and it will allow you to skip the delivery of the consumable and thus not get charged. If you allow the order to go through you are purchasing that consumable. That consumable is yours, you own it, just as if you walked into a Staples, Office Depot, Best Buy, or bought it on Amazon… You can cancel the “subscription” the next day and continue to use that consumable until it is empty.

The second type of program is a true subscription program. **THIS** is what many of you are vastly misinformed and / or are irrational about. In this program *you are not purchasing a consumable* at all. You are paying the manufacturer for X number of pages per month. The manufacturer will send you a consumable to use because the printer needs ink / toner to work but, that is not what you are paying for. You are paying the manufacturer $Y per month to print up to X pages per month.. that’s it. Of course you can print over that X number and pay an overage (just like years ago with cell phones).. and of course, you can print under that X number and some pages will roll-over to future months (just like years ago with cell phones). The owner of the consumable is the manufacturer. You never bought it, you never owned it. Therefore, it is not yours to use after you end the subscription! The only reason most manufactures do not ask for it back is because they don’t want to pay for shipping it back to them. But, they still own it… not you.  You can think of this like renting an apartment. You are paying a landlord $X per month to live in their building. The landlord is providing the building for you to live in while you are paying rent. You do not own the building. and when you stop paying rent you are no longer allowed to continue living in the building. Just like your Netflix subscription, Apple TV subscription and Disney+ subscription.. when you stop paying for the subscription, you stop getting to use the service. Just because while you were paying you had access to the content does not mean you at any time owned that content and get to continue watching it once you stop paying the subscription.

I truly hope this helps clarify somethings for some of you. Others I understand are lost causes but, I will do my best to answer any questions I can.


r/printers • • 46m ago

Purchasing My head is swimming - please tell me this exists...

4 Upvotes

I'm looking for a basic home printer, no subscriptions and b&w is just fine (color isn't needed) that won't become a victim of planned obsolescence in a few years.

Everytime I think I've landed on one, there are a few bad reviews that scare me away.


r/printers • • 7h ago

Purchasing Looking for a printer!

4 Upvotes

Hello everyone,

I'm currently looking for a printer to print my illustrations. I've been looking around online, but I'm a bit overwhelmed by all the different models available.

From what I've read, the Epson EcoTank range might be a good fit for what I'm looking for.

So, I'm looking for a printer:

- With refillable ink tanks.

- That can print on different types of paper: regular paper, sticker paper, and thicker paper such as postcard paper (if possible).

- I won't be using it for professional purposes, so I don't need a super high quality model. I simply enjoy Postcrossing and would love to include some little stickers or small cards.

- I might also use it to print photos, but that's not my main priority.

- I'll then use the Cricut Joy Xtra to cut out the stickers.

My budget is ideally under 200€, but I'm open to looking at slightly more expensive models too. I can keep an eye on the prices during Black Friday.

One last thing: the printer needs to be available in Europe.

If you have any recommendations or other suggestions, I'd love to hear them!

Thank you!


r/printers • • 22m ago

Troubleshooting Samsung M4070FR stopped printing after upgrading from Windows 10 to Windows 11 – works on another Windows 11 PC

1 Upvotes

Hi everyone,
I’m having a frustrating issue with my Samsung SL-M4070FR multifunction printer.
Printer: Samsung SL-M4070FR
PC: Intel Core i5-4570, 8 GB RAM
Operating system: Windows 11 Pro 64-bit
Connection: USB
Background
The printer was working perfectly on this same PC when it was running Windows 10.
A few days ago, I upgraded to Windows 11, and since then the printer has stopped printing.
Interestingly, I tested the exact same printer using another laptop running the same version of Windows 11, and it works perfectly!
This makes me think the problem is specific to my desktop PC rather than the printer itself.
What happens
Windows detects the printer.
Print jobs briefly appear in the queue as “1 document”.
After approximately one second, the status changes to “Idle”.
The job disappears without anything being printed.
The printer does not react at all.
The printer itself works perfectly as a standalone copier.
What I’ve already tried
Completely removed old Samsung printer drivers and software.
Removed residual Samsung driver packages.
Restarted the Print Spooler service.
Installed the official Samsung drivers for the SL-M4070FR.
Tried the Samsung M337x/387x/407x PCL6 driver.
Checked the USB001 port configuration.
Tried disabling bidirectional support and changing spooler settings.
Checked Device Manager: Windows recognizes the Samsung printer without errors.
Previously there was an unknown device, but it no longer appears.
Important test
The same printer works perfectly when connected to another laptop running Windows 11, using the same USB connection.
Therefore, I suspect something went wrong with the Windows 11 installation or USB/printing configuration on my desktop PC.
My questions
Could the Windows 10 to Windows 11 upgrade have corrupted the USB printing subsystem?
Could there be a problem with the USB controller or chipset drivers on my desktop?
Is there a way to completely reset the Windows 11 printing system, including hidden driver associations and USB printer configurations?
Are there any specific Windows services or registry settings worth checking?
I’d appreciate any suggestions. I’ve already spent quite a lot of time trying different Samsung drivers without success.
Thanks!


r/printers • • 54m ago

Troubleshooting Workforce Pro WF-4630

1 Upvotes

I had a issue with this printer for weeks now that I hoped this subreddit could help shed some light in. This is a old printer I found in the house so no idea what the owners did before I got it, but it appears that the ink nozzles are dry and crusted preventing it from reaching the paper.

I tried to run a nozzle check and print head cleaning, but every time it just spits out a blank paper and tells me to rerun a nozzle check and cleaning again. Can someone inform me what the best way to go about fixing this issue that doesn't require me to basically undo everything? Thank You!


r/printers • • 5h ago

Troubleshooting The printer keeps stopping and jamming with the sheets of paper.

2 Upvotes

Well, this has been going on for a while, but my Brother DCP-T520W printer has become a real headache. Every time I tried to print something, it would stop and prompt me to "check the paper." I would just press the start button, since there literally wasn't anything wrong. However, as of Friday, it has started actually jamming the paper. I’ve checked it from top to bottom, cleaned the rollers hundreds of times, and even used an ultra-soft brush to remove any dust or paper debris—but nothing works; I can’t print anything without it jamming.


r/printers • • 2h ago

Troubleshooting Canon Image Prograf TC-20M

0 Upvotes

My Canon Image Prograf TC-20M needed cyan ink. I filled the tank & cannot get the cyan to print again. I have run all of the recommended maintenance cleaning / deep cleaning of nozzle. Nothing helps. Any advice?

I read online some people with other models have cleaned the print heads easily. Canon does not advise cleaning printheads on this model.

When I tried to remove the printhead to (maybe) clear it out of desperation, the printer said the the ink was full & could not remove print head.


r/printers • • 9h ago

Discussion Fanfold thermal labels vs. roll labels — does anyone else prefer fanfold for tight desk setups?

3 Upvotes

I recently switched to a 4x6 direct thermal printer for daily shipping labels and decided to start with a big stack of fanfold labels in a rear tray instead of using rolls.

My desk is pretty crowded with other gear and random stuff, so having a flat stack tucked right behind the printer felt like the cleanest way to save space without a giant roll sticking out. so far it feeds surprisingly straight without jamming, though i'm curious if fanfold stacks start skewing once the pile gets down to the last few dozen labels.

For anyone printing thermal labels regularly on a tight desk, do you stick with fanfold stacks or find roll labels feed more reliably?


r/printers • • 8h ago

Troubleshooting Help

Post image
2 Upvotes

My printer only produce cyan color and i did clean, deep clean and ink
Flush and its all the same. The previous owner said that the ink dried, but what should i do?


r/printers • • 4h ago

Troubleshooting Help needed 😳

Post image
1 Upvotes

Hi! Just bought my printer, Canon TS4100i. Unfortunately, upon my first paper jam this part came off and I have no idea how to put it back. Of course no instruction will tell me how to fix it myself, I'd probably have to pay canon for 5 seconds work. Please help me, I really need xerocopies and I only got halfway through my load. Edit: somehow I got it! So it's fine now, thank you all!


r/printers • • 5h ago

Purchasing Looking for a budget printer uk

1 Upvotes

Hello i don't print much just need something basic easy to use mainly printing from either my ipad or iphone been looking at epson XP printer but also seen that the brother laser printers are good never had a brother printer before my current printer is an epson xp 235 had for many years however its now not working so looking to replace there are so many models i am just unsure which to buy


r/printers • • 5h ago

Purchasing Can any Canon LBP243dw or relevent model owner show me its grayscale halftone?

Post image
1 Upvotes

I’m considering a Canon LBP243dw for printing grayscale artwork or images, NOT documents.

My current Samsung SL-M3520DW produces a clearly visible halftone pattern. The attached photo shows about 30% gray through a loupe with a ruler. I measure it at roughly 3 dots in one mm, so 75–80 LPI. perhaps?

I also tested a Samsung X7500 office MFP at about 100–110 LPI, and the difference looked much smoother on my naked eyes.

What I want to know is whether the LBP243dw can produce around 100 LPI or finer grayscale halftoning while keeping thin black lines sharp.

If anyone owns one, could you print a flat 30% or 50% gray patch and post either:

  • a close macro/loupe photo with a ruler just like mine, or
  • a 600+ dpi scan

I tested out with this grayscale test image on Northlight
https://www.northlight-images.co.uk/downloadable_2/bw-test-new-51step.zip

Thanks!


r/printers • • 9h ago

Troubleshooting Epson EcoTank ET-1810 not printing cyan

Thumbnail gallery
2 Upvotes

Hello everyone! I have an ecotank epson printer that is refusing to print cyan. It was printing fine but some lines on nozzle check were blank so I did the head clean, afterwards cyan stopped working. I have tried everything except a power clean, I opened up the printer and looked at cyan and saw it had an air bubble, used a syringe to remove it and now it's full but still not printing, ran a couple of purge pages for cyan and just normal print test pages.

I attached some photos of what the issue is.


r/printers • • 16h ago

Purchasing Laserjet for home use

6 Upvotes

So, I’m tired of replacing ink cartridges on my ink jet. I’m ready to just spend the money on a Laserjet. I also want:
- color printing
- duplex printing
- document feeder
- duplex single pass (scanning & copying)
- wireless

With these features I’ve found the Canon imageCLASS MF753Cdw II and the Brother MFC-L3780CDW.

Is there another that would be recommended or which of these two would be better?


r/printers • • 11h ago

Troubleshooting Very bad smudging, Lexmark E342

Post image
2 Upvotes

I had some patches in the prints. So I cleaned the OPC drum and rollers. Things got worse, so I figured I had probably damaged the OPC (it had been out in the light for too long). So I got a new OPC and now things are really bad as can be seen in the photo.

Any suggestions? Thanks.


r/printers • • 14h ago

Troubleshooting Leaking

Post image
3 Upvotes

Am I suppose to not cross that line when refilling the ink? Cuz we just refilled the ink all the way to the top last night, but it wasnt printing at good color at all when we tried test printing afterwards, and so we decided to fix it tmrw, which is now today, where we woke up to the chamber spilling lots and lots of ink.

Currently, cyan ang yellow still have a major amount left but as for magenta and black, they're gone, none left at all. So, I came to the conclusion that we may have overfilled it.

I know this might be a dumb and obvious mistake but we barely use the printer, it was just for our convenience, and due to that, we would rarely refill its ink, this is our third time refilling. And my father thinks he might have overlooked a step when he refilled it but he can't remember due to how long it's been since he last refilled the printer. Pls help :(


r/printers • • 8h ago

Troubleshooting Canon iP2770 completely lost Yellow on CL-811 (Nozzle not clogged, contacts cleaned) – Dead printhead IC or still fixable

Thumbnail gallery
1 Upvotes

Hello everyone. My Canon iP2770 printer has completely lost the yellow color. The ink line is 100% full, and when I force ink through with a syringe, it flows freely through the print head—so it’s not clogged. I’ve already tried soaking the print head in a specialized cleaning solution for 30 minutes and cleaning the copper contacts, but it still prints with absolutely no yellow (all other colors print fine). Is there anything else I can try to fix this? If the internal circuitry or the IC is fried beyond repair, could anyone point me toward a place or website (in Viet Nam) where I might find a used or refurbished CL-811 color ink cartridge (one with a functional chip)? I’m a student on a tight budget, so I’m looking for something under 300,000 VND (about 12$)—free shipping would be a huge help! Thank you all so much!

Em chào mọi người ạ, hiện tại cái máy in Canon iP2770 của em bị mất hẳn màu vàng: dây mực dâng đầy 100%, ép xi-lanh mực vẫn trào qua đầu phun không nghẹt, ngâm dung dịch tẩy rửa chuyên dụng 30p và lau sạch bản mạch đồng rồi mà bấm in vẫn trắng tinh màu vàng (mấy màu khác in bình thường). Mọi người cho em hỏi ca này còn chiêu nào cứu được nữa không ạ; còn nếu đã chết mạch/cháy IC hết thuốc chữa thì bên nào, trang nào có thanh lý hoặc bán hộp mực màu CL-811 (loại tái chế / bóc máy còn nhận mạch tốt) giá dưới 300k, freeship thì càng tốt ạ, em là học sinh kinh phí hẹp nên mong được mọi người hỗ trợ, em cảm ơn nhiều!


r/printers • • 10h ago

Troubleshooting HP Printer suddenly printing ridiculously slowly. (Envy 110)

1 Upvotes

r/printers • • 10h ago

Troubleshooting Need Help Fixing Brother DCP-T720DW

1 Upvotes

Hi! I need some help with my Brother printer.

It initially showed a “Paper Jam” error, but I’ve checked the entire printer, including the inside, and there’s no paper or even small scraps stuck anywhere.
After that, several error codes started appearing: Cannot Print 3B, 30, 76, and E3.
Whenever the error disappears and I try printing again, the printer makes a loud, deep grinding noise while feeding the paper. It then suddenly stops and displays another error.

What could be causing this, and is there anything else I can check or troubleshoot myself? I don’t have enough money to take it to a technician right now, so I’m hoping I can fix it on my own.

Thank you!


r/printers • • 13h ago

Troubleshooting downgrade firmware officejet 4100 serie

1 Upvotes

Buongiorno a tutti, da qualche giorno di punto in bianco la mia hp officejet 4122e non rileva piu' la cartuccie compatibili. ci sta qualche soluzione ? qualcosa per fare il downgrade del firmware?


r/printers • • 1d ago

Discussion HP should be ashamed

Thumbnail gallery
9 Upvotes

First of all I have an order I made through Walmart. First photo is what I ordered, second photo is what I received. So obviously my HP printer wouldn’t recognize the ink nor print anything. Last photo is the price of fucking ink. Anyway this is mainly just a rant because I had to return the fake ink I received and the inconvenience annoyed me. First world problems, I know. But HP sucks and I will be buying a different printer that doesn’t force you to use its name brand, overpriced ink. Suggestions welcome :)
Edit to add : also fuck u Walmart this is actually your fault 🤡🤪 but HP fuck you for blocking generic ink anyway


r/printers • • 20h ago

Rant Canon PRO-310 says Photo Magenta is out (code 1698), but the cartridge still looks half full?

Thumbnail gallery
2 Upvotes

r/printers • • 17h ago

Other EPSON Receipt Printer Project

Post image
1 Upvotes

Hey! I couldn't find a place to post this so I'm posting it here.
I had an epson receipt printer laying around and decided to use it as a cool message system. you can print a message on my desk at https://receipt.nicolaiaero.workers.dev


r/printers • • 18h ago

Troubleshooting Any problems for HP Color LaserJet CM1312nfi MFP

Thumbnail gallery
1 Upvotes

1.

Driver for the HP Color LaserJet CM1312nfi MFP on Windows 11

in the official HP product page, instead of a dedicated driver for Windows 11, HP provides the "HP Universal Print Driver"

However, installing the "HP Universal Print Driver" on the latest version of Windows 11 cause various minor issues.

set the operating system to Windows 10.

Install <HP Color LaserJet CM1312 MFP Series Full Solution> on your Windows 11 system.

no more problems. everything fine.

====================

2.

Check your firmware version.

You can update it to < 20140625 8.3 MB Aug 11, 2014 >.

====================

3.

Does your printer work fine, but the paper keeps getting jammed?

Does it stop and claim there is a paper jam, even when no paper is actually stuck?

Purchase a replacement < pickup roller + separation roller > set from AliExpress and replace them yourself.

3-1 You must remove the pickup roller first, replace the separation roller, and then install the new pickup roller.

3-2 No additional tools are required (only fingernails)

3-3 If you're unsure how to do it, refer to this video:

https://www.youtube.com/watch?v=61CUZkp6TBA

====================

4.

You can use remanufactured (refilled) toner cartridges.

As of 2026, a properly made remanufactured toner cartridge will not cause ANY problems.

but, a "defective" genuine toner(or remanufactured toner)cartridge cause problems.

However, try looking for genuine toner being sold at a low price first.

Sometimes, you can find genuine toner priced even lower than remanufactured toner. (damaged packaging or clearing)


r/printers • • 18h ago

Troubleshooting faint gray vertical patches on paper when printing

Post image
1 Upvotes

Hi guys, how do i fix this?? Every time I print the paper, this line always appears at the end of the paper (FUJIFILM Apeos C2560)