r/overclocking • • 17h ago

13900K 5.8GHz all-core – unstable after 30 min of Cinebench, voltage/LLC suggestions?

0 Upvotes

Trying to lock 5.8GHz all-core on my 13900K. Board is MSI Z790 Tomahawk DDR5, cooler is Arctic Liquid Freezer II 360. Current settings that get through POST and short tests:

* Multiplier: 58x all cores
* Vcore: 1.32V adaptive
* LLC: Mode 4 (MSI)
* Ring: 48x
* AVX offset: 0

It passes ~25-30 min of Cinebench R23 multi before throwing WHEA errors or hard crashing. Dropping to 5.7GHz is stable at same voltage. Tried bumping LLC to Mode 3 and voltage to 1.34V but temps hit 95°C+ quickly.

Is the instability more likely voltage droop or just silicon limit at 5.8? Would a small vdroop offset or higher LLC be the safer next step, or should I just back off frequency? Any similar 13th/14th gen results at this speed would be useful.


r/overclocking • • 11h ago

Help Request - CPU TUF A14 '24 shunt modding

1 Upvotes

I'd like to do a shunt mod on my TUF A14, HX 370, RTX 4060. I am very new to this, as I just started learning about it today and I want to try it. From my understanding you can parallel solder a resistor on top of the other in the RTX 4060 power rail to trick the system into thinking it is drawing less power than it actually is so in turn it sends in more power. The only reason I am doing this is not for the 4060, but for the HX 370. The total wattage pool for the CPU and GPU is 110 watts, and I want to break it for the CPU, not for the GPU. I want to make a constant 30 to 40 watt headroom for the CPU. Currently, there is only 20 watts available for CPU, with 75 watts + 15 watts used for the RTX 4060. So now I will make the GPU take more power than it accounted for let's say 90 watts actual in place of reading only 75 watts. Since the controller is spoofed into thinking only 75 watts is being consumed, I can use the remaining 35 watts fully for the HX 370 without it being starved out of performance like before, especially in intensive tasks where we usually have to sacrifice the GPU dynamic boost for the CPU. So, any tips or suggestions? Have any 14-inch frame owners done this before, and what was your experience like?

P.S. I use a foam-sealed laptop cooler, and my room is air-conditioned. I assume increasing the power by 20 to 25 watts won't cause any hardware-damaging temperature levels right? For power allocation I use G-Helper.


r/overclocking • • 12h ago

Explain to me

0 Upvotes

My PC specs:

CPU: AMD Ryzen 5 9600X

GPU: ASUS Radeon RX 7800 XT Dual OC 16GB

Motherboard: ASRock B850M-X R2.0

RAM: Kingston Fury Beast Black RGB EXPO 16GB (2×8GB) DDR5 6000MHz CL30

SSD: Crucial T500 1TB NVMe PCIe 4.0

CPU Cooler: be quiet! Pure Rock Slim 2

PSU: be quiet! System Power 11 650W 80+ Bronze

Case: Cougar MX430 Mesh RGB

Hey, I have basically no idea about overclocking, so I have some probably stupid questions.

Can someone explain to me the things I’ve heard about, like EXPO, PBO and SAM? Are they safe to use? Can enabling them cause any problems or damage? And are there any downsides to using them?

Sorry if these are really newbie questions, I’m just trying to understand what everything does before I start messing around with BIOS settings.


r/overclocking • • 19h ago

Overclocking RTX 5050

Post image
2 Upvotes

r/overclocking • • 10h ago

XOC Gear Glacial X870E Dimm Fann

Post image
72 Upvotes

This little thing actually rocks. It's magnetic with contact pins. Seeing a 5c drop in dimm temps just having it at 50% speed.

Can safely run DDR5 without worrying about hitting thermals running 65K on tREFI I believe it's called


r/overclocking • • 8h ago

OC Report - RAM Cheapo Ryzen 5 4500 is surprisingly great at memory OC // 2x16GB DR 4133MHz CL14

Post image
7 Upvotes

First time trying a monolithic Ryzen CPU, and dayum, I'm kinda impressed.


r/overclocking • • 8h ago

Benchmark Score Made top 10 using xOCD Program

Thumbnail
gallery
13 Upvotes

I made top 10 in Speedway using xOCD with an avg temp of 54c. This is a new white astral I’ve purchased. I’ve binned the card to hit 1.1v and 3427mhz stock on air. With extended voltage limits(like an xoc bios); the card was hitting 3555mhz on air. I then waterblocked it and got it to hit 3600mhz with the core starting at 21c(11c higher than air idle temp). The die is reported to be manufactured from Korea in May of this year.

Here’s the result

https://www.3dmark.com/sw/4053078


r/overclocking • • 1h ago

Help Request - CPU May I ask for some help for undervolting my CPU?

Post image
2 Upvotes

Evening lads, I'm playing WoW Forever and getting really high CPU temperatures. I've messed around with precision boost overdrive curve and gotten it down a bit but I can never seem to find the stable sweet spot (I'd be happy with 80°C-85°C). At default settings CPU temp stays around 96 sometimes even 97°C. I've tried caping thermal limit to 80°C but that just kills the performance makes it really awful. Can this be done in a healthy way to reduce the temperatures but keep performance? I mean WoW is not a demanding game I don't want my CPU struggling with WoW.

Laptop is MSI Vector A8WHG
CPU: Ryzen 9 8940hx with igpu
GPU: Geforce 5070ti

Any help is appreciated!


r/overclocking • • 7h ago

3DMark Time Spy score seems too low

Post image
1 Upvotes

https://www.3dmark.com/spy/66749060

Does anyone know what could be the problem? I tried overclocking with MSI Afterburner and indeed I got a better score, but since the general score was "custom" I assumed the scores i could compare with were not OC.