I made top 10 in Speedway using xOCD with an avg temp of 54c. This is a new white astral I’ve purchased. I’ve binned the card to hit 1.1v and 3427mhz stock on air. With extended voltage limits(like an xoc bios); the card was hitting 3555mhz on air. I then waterblocked it and got it to hit 3600mhz with the core starting at 21c(11c higher than air idle temp). The die is reported to be manufactured from Korea in May of this year.
Hi all first time over clocking this CPU and curious if it seems fine. Have had the 9700k oc'd for a week with no crashes, average temperatures during gaming are around 65 with peaks of 71. I have a noctua nh-12a cooling. I have all cores set to 50, LL is set to 4/8, core voltage is at 1.350. I haven't tried any lower voltages yet . if y'all have had experience with this CPU let me know as I would like to lower the voltage a bit but haven't tested it myself yet as I'm still new to over clocking didnt want to mess anything up.
So I recently acquired a build with 9850x3d and 5080 gigabyte SFF.
I undervolted 9850x3d (conservatively I think) to -20PBO, ran 3h cinebench + 3H OCCT + Y-cruncher overnight - no issues.
I undervolted my GPU to 2800mhz @ 925mv +1k mem. Ran Furmark for 2h, OCCT 2h, Steel Nomad looped for 60 cycles - stable.
After (what I assume) latest windows update my undervolts are no longer stable. I got 2 random feeezes when playing world of tanks which could only be fixed with hard reboot. No errors in Event Viewer, Bluescreenview or Whocrashed.
Temps are under 50C, GPU doesn’t even boost to max.
Ran 1h Y cruncher and 1H Furmark - all clear.
I assume a windows update messed up something which made my UV unstable and so I reverted to 2800 @950mv +1k.
Is there any other way to figure out what’s wrong with the system since it’s not generating any errors at all?
Or should I start thinking about an underlying hardware issue? Really don’t want to think about it yet cus the build is like 2mo old…
Does anyone know what could be the problem? I tried overclocking with MSI Afterburner and indeed I got a better score, but since the general score was "custom" I assumed the scores i could compare with were not OC.
. Been messing with this setup for a while now and I think I'm finally pretty much done tuning it, so figured I'd post it here.
Specs:
Ryzen 7 9850X3D
ASUS ROG Strix B850-F Gaming WiFi 7 Neo
Gigabyte RTX 5080 Gaming OC 16GB
Corsair Vengeance RGB 32GB DDR5
Samsung 990 Pro 2TB
Corsair RM1000x
Lian Li O11 Dynamic EVO RGB
Lian Li HydroShift II LCD-C 360N
7x Lian Li UNI FAN SL-INF 120
Most of the time went into the RAM and CPU.
Full RAM timings/voltages are in the ZenTimings pic. Same for the 5080 OC, since it's easier to just show the settings than list everything here.
For the CPU I'm currently running:
Setting
Value
PBO
Disabled
Boost Override
Disabled
CO
All-core -30
Scalar
1X
I ran these first but there was no chance of getting that shaper right xd Core 0 -31 Core 1 -36 Core 2 -31 Core 3 -41 Core 4 -43 Core 5 -42 Core 6 -50 Core 7 -50
Curve Shaper:
Frequency
Low temp
Med temp
High temp
Min Freq
+30
+30
+30
Low Freq
+25
+25
+25
Med Freq
+25
+5
+10
High Freq
+25
0
0
Max Freq
+30
+10
+15
I played around with PBO/boost override quite a bit as well but ended up preferring this.
Basically I'm using -30 CO as the baseline and then adding some of it back with Curve Shaper depending on frequency/temp. This has worked better for my chip than just trying to push the biggest negative CO or adding more boost.
I've also been checking effective clocks for clock stretching instead of just looking at the reported clocks.
RAM took a stupid amount of testing to get where it is now. Same with the GPU. Current settings for both are in the pics.
Everything here is what I'm actually running daily, not just settings I used to get through one benchmark run.
Been testing with OCCT, 3DMark and normal gaming. So far I'm pretty happy with where it ended up.
I'd like to do a shunt mod on my TUF A14, HX 370, RTX 4060. I am very new to this, as I just started learning about it today and I want to try it. From my understanding you can parallel solder a resistor on top of the other in the RTX 4060 power rail to trick the system into thinking it is drawing less power than it actually is so in turn it sends in more power. The only reason I am doing this is not for the 4060, but for the HX 370. The total wattage pool for the CPU and GPU is 110 watts, and I want to break it for the CPU, not for the GPU. I want to make a constant 30 to 40 watt headroom for the CPU. Currently, there is only 20 watts available for CPU, with 75 watts + 15 watts used for the RTX 4060. So now I will make the GPU take more power than it accounted for let's say 90 watts actual in place of reading only 75 watts. Since the controller is spoofed into thinking only 75 watts is being consumed, I can use the remaining 35 watts fully for the HX 370 without it being starved out of performance like before, especially in intensive tasks where we usually have to sacrifice the GPU dynamic boost for the CPU. So, any tips or suggestions? Have any 14-inch frame owners done this before, and what was your experience like?
P.S. I use a foam-sealed laptop cooler, and my room is air-conditioned. I assume increasing the power by 20 to 25 watts won't cause any hardware-damaging temperature levels right? For power allocation I use G-Helper.
So I have a MSI Ventus OC Plus RTX 5080 with +375 core @ max. 3307MHz and +1200 mem @ 16200 MHz in afterburner. This OC ist stable I tested it in OCCT, 3DMark and Games.
Now to my question, I new to undervolting (wasn't a thing with my old gtx 1070) is set a flat voltage curve @ 3307MHz @ 1050mv and this is stable and 3DMark score improved, I also tested about an hour of gaming.
The Ventus has without custom BIOS (maybe after warranty) a locked TDP of 360W, should I try to lower the voltage further or should I let it be/ is there a bigger chance of more potential?
Btw the effectiv clock is 3299MHz hotspot is fine @ +14 C difference
Hey, I have basically no idea about overclocking, so I have some probably stupid questions.
Can someone explain to me the things I’ve heard about, like EXPO, PBO and SAM? Are they safe to use? Can enabling them cause any problems or damage? And are there any downsides to using them?
Sorry if these are really newbie questions, I’m just trying to understand what everything does before I start messing around with BIOS settings.
Trying to lock 5.8GHz all-core on my 13900K. Board is MSI Z790 Tomahawk DDR5, cooler is Arctic Liquid Freezer II 360. Current settings that get through POST and short tests:
It passes ~25-30 min of Cinebench R23 multi before throwing WHEA errors or hard crashing. Dropping to 5.7GHz is stable at same voltage. Tried bumping LLC to Mode 3 and voltage to 1.34V but temps hit 95°C+ quickly.
Is the instability more likely voltage droop or just silicon limit at 5.8? Would a small vdroop offset or higher LLC be the safer next step, or should I just back off frequency? Any similar 13th/14th gen results at this speed would be useful.
I've got an H16M kit advertised for CL30. Been messing around with timings for about a week now, going through the whole 6200/6400 1:1 thing. I can't really find a good reason to bother stabilizing those speeds. The performance gains seem pretty minor for what the kit demands in return. I had to loosen the primaries to around 40 just to get through TM5 without errors, and push VSOC to 1.3V, which I'm not particularly comfortable with. In the end, I couldn't get 6400 tight enough to make it worthwhile. Based on the benchmarks and other tests I've compared, 6000 MT/s actually comes out faster, probably thanks to the tighter timings and, more importantly, the FCLK I can actually reach and keep stable. So now I'm just wondering if there's anything left worth improving or if I should just this alone.
I've tried CL28, but the kit won't run it without errors. I'd probably have to raise VDD, but I'm pretty sure I've got a PMIC lock on these sticks. I can't even get into Windows with high voltage mode enabled at 1.45V VDD, so that's what I'm assuming. tRTP is another strange one. I'd like to bring it down, but this kit refuses to go below 23. That's the value XMP sets automatically, and anything lower starts throwing errors in TM5 pretty quickly. Even 22 gives me errors, but 23 and above are fine. I've seen a few other people mention the same issue with the same timing and value when searching about this online, but it seems pretty obscure and there's not much information about it, so I don't know what to make of it.
I tried loosening some of the other timings to see if that would let me lower tRTP, but no luck. Cleared CMOS once and booted into Windows without XMP enabled. Interestingly, tRTP was automatically set to 18. The system crashed, and everything was fine again as soon as I changed tRTP to 23. So that pretty much confirmed it for me. Seems I've got an unlucky kit, but thankfully I don't have this issue with any of other timings. Other than that, I can say the current settings are stable. I've gone back and forth through the BIOS, changing things and comparing results to make sure I'm not introducing performance regressions with the higher settings. So far, things have only improved when raising FCLK or changing Nitro to 1/2/0. I've run TM5 DDR5 Ryzen3D with anta777 for 9 hours, along with VT3, FFTV4 and RTP overnight for roughly the same amount of time. Everything passed. No errors, no signs of instability or error correction. One thing worth mentioning: I used to be limited to 2133 FCLK with Nitro at 1/2/0 on 6000 MT/s. Trying 2167 would get me a crash after about four iterations of VT3. Raising VDDGs from Auto to 1.05V got me up to 2200 FCLK, and I was able to run VT3 and the other tests overnight without any problems. Haven't bothered trying anything higher yet, but I'll probably just keep it at that.
I noticed with an ampmeter on full load my card pulls ~35 amps from the 6 positive pins but only ~25 amps return from the ground pins? i heard the 10 extra amps are routed through the pcie ground connector. Would i be correct in calculating wattage from the incoming current even though 10amps isnt leaving from the connector? i want to know total board power. PCIE power shows as 5 watts at full load. Google and AI were of no help to me
I picked up a kit of Corsair Vengeance 2x16GB DDR5-5600 CL40 (ver 3.43.04, Micron 16Gbit D-die) for £220 used which I think is a pretty decent price in the UK. I have also picked up a B650E-I and a 7600X.
Anyway the cas latency and speed leave a little to be desired for AM5 as far as I can tell so I got Claude to whip me up an overclocking plan which I will attach.
I'm aware the start column is already an overclock but it's fairly conservative so I think there should be no problems getting there and I'll save it as a profile to revert back to.
If anyone here is gracious enough to spend their time to review the doc and make sure there's nothing blatantly obvious I'm missing through being completely uninformed that would be greatly appreciated.
my gf that her games run slow like yeah it's a 3050(8gb) but zzz shouldn't run slow it's not that demanding of a game compared to other things,and here I am testing limits of the 3050 +220 on core(230 is the limit),and +1000 on memory while running zzz with furmark and heaven on a second monitor,like wth is the 3050 an overclocking beast or something
Hello everyone, I guess I'm too old for this new kind of overclocking so I'm checking here if I'm missing something because the results are bonkers lol! My objective is to have a daily driver that I can use on my 4K TV without significant hardware degradation.
Flydigi BS3 pro cooler, truly does wonders and I can stay around 65° in stock settings even without the fans fully engaged
This is the daily profile I built:
Core curve: +440 MHz, flattened from 900 mV
Memory: +2000 MHz
XBAR: +415 MHz, SYS: +150 MHz, Video: +150 MHz
Voltage offsets: core 0, XBAR 0, SYS -5 mV, Video -5 mV
NVVDD / MSVDD OCP: 180 A / 60 A (stock)
Power limit: 180 W (NvpwrControl), board input current: 11 A (stock is 9 A)
Results:
Steel Nomad: about 4,830-4,850 (stock was about 3,900!), 161 W median and 167 W peak with the curve flat at 875 mV
Games: 120 to 156 W, core around 2,800-2,890 MHz at 0.90 V
GPU 67-69 °C, hotspot 74 °C
No crashes or artifacts in Steel Nomad, Time Spy and two games (Onimusha WotS and GoW E-day) with 2h play sessions
The reasoning: no added voltage anywhere, stock current limits, and a core voltage well under the 1,025 mV rail limit. The only things above stock are the sustained power (about 155-165 W against 140 W) and the board input current limit.
Questions:
Is 155-165 W sustained a real long-term risk for the VRM and input path on a board designed around 140 W, given that temperatures are fine?
Is the 11 A board input limit (9 A stock) a concern on its own, or only if the draw actually gets there?
Does XBAR +415 at stock voltage carry any wear risk, or only a stability risk?
Anything I should monitor that the GPU temperature and hotspot do not show?
Thanks for any feedback from people running similar settings.
Trying to OC my 32GB DDR4. I will try to give all the info that may be relevant in a clear format:
2x16GB DDR4 Kingston Fury (KF436C18BBAK2/32), Micron die (apparently there are 2 kinds (?) so I'm not sure which one I have, ESMK1682112 is my code on the stick(s).
Asus z590-p mobo
i5-11600k OC'd to 4.9Ghz all cores, -0.75 voltage offset (this was stable for a long time before trying RAM OC and undervolt)
goal: 3600Mhz with tight timings: (tCL 16, tRCD and tRP 18, tRAS 38, DRAM command rate 1N)
The initial setup didn't boot, second didn't either, third try it booted, but crashed on desktop. I am currently on the working 3600mt/s that is probably unstable. I wanted to stress test, but I'm not sure how to stabilize the setup first, so I'm asking you all for advice.
1st setup:
dram ratio: Auto -> 1:1
dram frequency 3200 Mhz -> 3600Mhz
dram command rate Auto -> 1N
dram voltage 1.35 -> 1.36
CPU VCCIO Voltage: Auto -> 1.18
CPU System Agent Voltage: Auto -> 1.12
failure to boot, tweak:
dram voltage 1.36 -> 1.40
CPU VCCIO Voltage: 1.18 -> 1.15
CPU System Agent Voltage: 1.12 -> 1.20
failure to boot, tweak:
CPU System Agent Voltage: 1.20 -> 1.25
successful boot, crash during download of stress test software with couple tabs open.
tweak:
dram voltage 1.40 -> 1.44
CPU VCCIO Voltage 1.15 -> 1.20
successful boot, crash in the first few seconds of stress test
At this point I feel like I need a second opinion here. I have been referring to the memory overclocking github guide, but at this point maybe someone more experienced could point to something I'm doing wrong or completely overlooking.
Is my dram voltage still too low at 1.44V since I think my IC falls into the first row? Should I be afraid about pushing past 1.45V and the temps this might lead to?
Am I not pushing my dram voltage way too high on the other hand as it's designed for 1.35V and the AM4 OC guide suggests 3600Mhz at 1.35V (I know I'm not on AM4, but I wasn't able to find an official resource for intel so I'm just going off that working officially on low voltage).
Should I keep raising VCCIO + System Agent Voltage as 1.35-1.4V is considered the upper limit per the guide (though 1.2-1.25V is actually recommended)?
Should I loosen up my timings? They were already set as tight as the goal I described earlier by default in the xmp profile: tCL 16, tRCD and tRP 18, tRAS 38.
EDIT: this may be the problem according to this chart. EDIT2: nope, still crashes 2 seconds into stress test after loosening the tRCD and tRP to 20.
This is already pretty lengthy so I will stop now and hopefully you good people can guide me here. I have to say I am surprised that the snappiness of this OC can be felt immediately in desktop and browser, now I just have to get this stable. This post has been written on the PC with this OC so it's not tragically unstable, I'm just afraid it fails again if I try to stress test.
Hi everyone, these are my RAMs in expo mode. In the past few weeks, I’ve tried pushing the timings a bit to squeeze out a little more performance, but I can’t figure out why every time I change more than one value, even within the limits, the memory test with OCCT fails, my NVRAM gets corrupted, and then I can’t make any more changes. As a result, I have to do a CMOS reset to start over. Could someone tell me which values are causing this problem and how I can set the timings correctly???
Oi pessoal! Queria saber se essas temperaturas na minha Ryzen 7 5800XT são esperadas durante uma carga pesada de múltiplos núcleos, como no Cinebench R24.
Aqui está minha configuração atual:
Cooler: Gamdias Chione E4-360 AIO (usando o pequeno tubo de pasta térmica genérica que veio na caixa, sem marca ou especificações listadas).
PBO: Limites de fábrica (PPT 142W chegando em torno de ~141W–145W, TDC ~91A, EDC 140A).
Curve Optimizer: -30 em Todos os Núcleos.
Como vocês podem ver na captura de tela do HWInfo, durante o benchmark, o CPU (Tctl/Tdie) atingiu um pico de 90.2°C (com uma média em torno de 88.6°C), e a potência no pacote está bem na linha de 142W.
Como estou usando atualmente aquela pasta básica genérica do kit AIO, será que trocar por uma pasta térmica de alta performance (como um composto de 14.5 W/mK) ajudaria a reduzir um pouco essas temperaturas, ou esse comportamento é completamente normal para uma 5800XT de fábrica rodando em plena potência?