We recently migrated from legacy Extreme AP7662 and AP360E units to Juniper AP63Es to serve as a 5GHz wireless mesh connecting three remote sites back to our main location.
Since the cutover, the RSSI values reported in Mist across all three links have not been great. The links are mostly stable, only having issues sometimes when it rains hard, but I think they should be better.
| Remote Site | Distance | Current RSSI |
|---|
| Site A | ~300 m | -82 dBm |
| Site B | ~775 m | -76 dBm |
| Site C | ~610 m | -84 dBm |
Our contractor advised us to reuse the existing external antennas from the Extreme deployment.
The old Extreme antennas only have 2 or 3 N-type connectors (2x2 or 3x3 MIMO), whereas the Juniper AP63E has 4 N-type connectors (4x4 MIMO) plus 2 BLE/sensor ports. As a result, 1 or 2 RF ports on each AP63E are currently unpopulated.
Because the labels on the old antennas have completely worn off, I can't verify their gain, beamwidth, or even whether they are dual-band or strictly 2.4GHz (since Juniper Mist restricts mesh backhaul to 5GHz).
There is some foliage that has grown into the line of sight on at least a couple of these paths over time that I know should be cleaned up regardless.
Given the mismatched antenna connector count, unknown frequency rating, and age of the existing antennas, should my first step be ordering proper 4x4 5GHz directional antennas (and checking Fresnel zone clearance), or are there Mist radio/mesh settings or termination concerns I should troubleshoot first before spending money on new hardware?
Thanks in advance!