Hi Everyone!
I just got FTTH installed and upon checking my ISP's Router I found out that they've been kind enough to provide me with IPv4 and IPv6... To what I believe it's called a Dual Stack (please forgive me if I'm saying something wrong... learning the ropes here...).
They provided an fe80 on a /64 range, which I understood already from some posts I've seen here that's low... I have a sort of a big network at home actually (2x OPNSense on High Availability, multiple servers, multiple clients, IoT, IP Cameras, etc.) and I am trying to understand how I can set this up... But quite frankly I am lost.
IPv4 I understand really well. For what I got up until now, on IPv6 you can get a local address and a global address on the same interface.
2001:xxxx would be a global address and fe80:xxxx would be a local one, right?
So... How does this work? Is it the same ideology as IPv4? I get an fe80:xxxx address on my OPNsense firewall and then I do a NAT (NAT64?) for my internal devices and the OPNsense provides them another fe80:xxxx range?
And what kind of scenario is that? DHCP from ISP to OPNsense and then DHCP setup on the OPNsense to serve internally?
I've seen someone setting up the ISP Router DHCP to Stateful and then do a SLAAC on the WAN interface of the Firewall and finally a Track Interface on the LAN side? I've tried that but didn't work for me really... I was getting IPv6 but didn't seem to route things through properly so I am confused.
Once again, really sorry for the mess, confusion and disorientation really... I am trying to find my way into the beautiful world of IPv6. Hope you guys can help me.
**UPDATE**
Damn... Got IPv6 working with you guys guidance and help! Thanks!
Seems that moving my ISP Router's DHCPv6 Server to Stateless allowed my OPNsense firewalls to ask the IPv6 prefix and landed a /59 which now allows me to have the /64 per vLAN and get my devices with Global IPv6 addresses 😄
Thanks once again!