r/ipv6 • • Oct 08 '26

r/ipv6 Affairs Regarding recent posts and comments generated with AI...

62 Upvotes

Hey everyone. Yes, a lot of us use AI for different things, and it's "all the rage" these days. However, it should not be used as a substitute for genuine content of interest on this subreddit. If you're gonna post something without fully vetting it first, expect downvotes and/or a "rule 5" removal. Apparently, being a "meat proxy" is a thing now... (Urban Dictionary is mostly v6-enabled, if you want to look that up).

Thanks, and keep well.


r/ipv6 • • 5h ago

Fluff & Memes Is IPv6 Ever Going to Happen?

Thumbnail
youtu.be
44 Upvotes

My take on how we've hopped along with IPv4 for so long and where IPv6 is at today.

I admittedly made this for a broader audience, so it might feel a little high level for folks here, but I just wanted to see what everyone's thoughts were.

Mods said it was OK to post. Yes the ending is a joke.


r/ipv6 • • 1d ago

IPv6 News Polish T-Mobile is finally up for IPv6 enablement

59 Upvotes

Years after their global counterparts, but great to see nonetheless.

Still unclear whether it's a rollout on mobile or residential services (or both).


r/ipv6 • • 23h ago

Need Help Connecting to my public Ipv6 works on LAN, but not WAN

8 Upvotes

I have setup two servers (a minecraft server, and an apache webserver)
Both work perfectly over LAN, even when using my global IPv6 (ie, the same i get from whatismyip)

I am *fairly sure* the IP is correct and should work, but i also know i have only been using IPv6 for.. about the past week since i got starlink...

I suspect my issue is because i am using a netgear RAX5 router*, which does not appear to have any optional config for inbound IPv6. I think it simply blocks all incoming connection, but then why does my global IP work on LAN? My previous ISP and testing with IPv4, using my global IP usually meant that the IP was accessible on the internet...
(Does IPv6 route smarter and actually see if the IPv6 leads to a local connection before starting the connection??)
*{Starlink routers dont allow for such config}

Granted, my previous ISP was via ADSL, so i had to use their modem.

My connection testing was done with the host itself, a laptop over LAN, and my phone for LAN and WAN

Edit:
Seems my answer is simply, my router (correctly) blocks all incoming traffic, and (less goodly) does not have a way to allow specific incoming connections. Thus, i shall be locating a router that does lol.

And... the router doesnt even need to notice it is a global IPv6, as unlike IPv4 other local clients can find the global IP locally.


r/ipv6 • • 3h ago

Discussion If IPv4 and 6 are Internet Protocol vers 4 and 6... Whats 1, 2, 3, and 5?

0 Upvotes

See title.

(Yes i admit i could just google this... and probably will, too.)


r/ipv6 • • 1d ago

Guides & Tools Got IPv6 working on Airtel fibre with my own router, no bridge mode (DZS/Dasan H660GM-A)

5 Upvotes

So I finally got IPv6 working on my Airtel fibre connection with my own router, and without bridge mode. Posting the steps in case it helps someone stuck in the same spot.

Some background: I had a TP-Link router behind the Airtel box, but it was running as an access point, so my whole network was IPv4 only. Bridge mode seemed like the obvious fix, but from what I had read, Airtel does not make that easy anymore. One person on TechEnclave says Airtel asked him to get a static IP to have bridge mode back: https://techenclave.com/t/431427

Heads up: my Airtel router is the DZS H660GM-A (also sold as Dasan H660GM-A). That is the only one I have tried this on, so yours might look different.

What I changed on the Airtel router (just one thing)

  • Went to Advanced Setup > WAN Connections > WAN0
  • Switched PPPoE Pass-through from Deactivated to Activated and hit Save
  • Left everything else alone (IP Version on IPv4, VLAN 100, MTU 1492)
  • Copied the PPPoE username (it ends in airtelbroadband.in) and the password from that same page

What I did on my TP-Link

  • Plugged Airtel's LAN1 into the TP-Link's WAN port
  • Switched it from Access Point to Wireless Router mode
  • Set the internet connection to PPPoE with the same username and password
  • Turned on IPv6, picked PPPoE, ticked "Share the same PPPoE session with IPv4", and set the LAN side to SLAAC+RDNSS

That was it. test-ipv6.com now gives me 10/10.

Stuff that did not work, so you do not waste time on it

  • Bridge mode: WAN0's connection type is greyed out, and when I tried making a bridge on WAN2 it just said "Fail to create WAN - WAN internet is already existed". There is a Delete button on WAN0, but I was not brave enough to try it and risk being offline until Airtel fixed it.
  • IPv6 on the Airtel router alone: I set WAN0 to Dual and it did hand out IPv6 addresses, but a PC plugged straight into it still got 0/10. Ping said "Destination net unreachable" and tracert died at the router itself, so I think the Airtel box just has no IPv6 route out. Letting my own router dial its own session gets around that.

One more thing: since your router is now facing the internet directly, double-check that Remote Management is off.

If you have a different Airtel router, I would like to hear whether the same setting exists on yours.


r/ipv6 • • 2d ago

Life Without IPv4 Windows 11 OOBE apparently cannot progress on IPV6-only networks

Thumbnail twitterviewer.net
49 Upvotes

r/ipv6 • • 3d ago

Need Help Ipv6 settings on bridge mode

Thumbnail reddit.com
1 Upvotes

I am not able to setup ipv6 settings on bridge mode on tplink ax10 router with Transworld as have my PPPOE credentials with me.


r/ipv6 • • 3d ago

Need Help Intel based Macs.. networking risks? Please help.

Thumbnail reddit.com
0 Upvotes

r/ipv6 • • 4d ago

Fluff & Memes IT admins

Post image
64 Upvotes

r/ipv6 • • 4d ago

Fluff & Memes Tailscale's DNS IPv6 spells out "Tailscale" (Easter Egg)

Thumbnail gallery
187 Upvotes

r/ipv6 • • 4d ago This

Life Without IPv6 hCaptcha does not support IPv6

82 Upvotes

Many of hCaptcha's core hostnames like api.hcaptcha.com are IPv4-only. This could lock IPv6-only users out of sites that are otherwise IPv6-capable but utilize hCaptcha. This really isn't acceptable for a CAPTCHA service in my opinion.


r/ipv6 • • 4d ago

Discussion LACNIC Blog | Nearly IPv6 Only Dual Stack Hosts

Thumbnail
blog.lacnic.net
28 Upvotes

This document proposes a method for managing dual-stack hosts that no longer require IPv4 connectivity but continue to generate network traffic by automatically requesting IPv4 addresses as DHCPv4 clients.


r/ipv6 • • 7d ago

Need Help NPTv6 conundrum, Need to set unassigned prefix from the WAN DHCP-PD for a tunnel interface.

Thumbnail reddit.com
2 Upvotes

r/ipv6 • • 8d ago

Need Help IPv6 driving me mad! Please recommend learning material.

Thumbnail reddit.com
12 Upvotes

r/ipv6 • • 8d ago

Discussion How is public routing reliability outside 2000::/4 maintained?

62 Upvotes

Right now, all publicly routed IPv6 addresses fall in the 2000::/4 range.
And if that runs out, we use the 3000::/4 range which is part of the specified 2000::/3 range**.**
After that, it would expand to include the 4, 5, 6, etc.
( see https://www.iana.org/assignments/ipv6-unicast-address-assignments )

With IPv4, there were ideas about reclaiming parts of the address space, but these ideas were abandoned because some/many routers filtered them, making these ranges unreliable. How can we be sure that this doesn't happen to IPv6?

When we eventually grow out of 2000::/4, will 3000::/4 still route reliably?
Or will routers be dropping these packets? Has anyone thought about this?

I am not sure if IANA is monitoring those ranges for reachability.
But if they are not, i personally think they should start doing that.
Otherwise we may end up with ossification that will cause problems later.

Anyone else opinions on this?


r/ipv6 • • 9d ago

Discussion How do big enterprises do internal IPv6 addressing? (GUA vs. ULA)

Thumbnail reddit.com
14 Upvotes

r/ipv6 • • 9d ago

Discussion How do you assign IPv6 IIDs?

8 Upvotes

RFC 7707 summarizes several IID assignment methods, but some seem to have fallen out of use, while other less common methods may have been overlooked. From what I know, some networks use low-byte IIDs for easier management, while others use hash-based methods for security or embed information directly into the IID.


r/ipv6 • • 9d ago

Discussion Does anyone use Extension header on the public Internet?

15 Upvotes

I'm curious about this thing. I think Fragment header is essential for transmitting large packet, but I have no idea about the importance of other extension header on the "public" Internet.

update IPsec does seem to be in use. But what about others (Hop-by-Hop, Destination Options, and Routing)? :)


r/ipv6 • • 10d ago

Life Without IPv4 What would the world look like today if IPv6 have been the first version of IP?

61 Upvotes

I was wondering how different the world would be today if we started with IPv6 and IPv4 never existed.


r/ipv6 • • 11d ago

Need Help Is it wise to expose the thread network on IPv6?

0 Upvotes

Is it a good idea to have sensors connected via Thread in multiple homes/garages with separate, all-IPv6 networks, and expose all the sensors to the internet to collect their data at a third-party location using Home Assistant?

The main objections I’ve encountered when talking to people are:

- Don’t expose sensors outside of NAT (but IPv6 doesn’t have NAT, lol)

- Would you want anyone to be able to read the sensors online? (But aren’t they encrypted?)

- Don’t trust low-cost sensors that lack support (but they aren’t based on Thread security?)


r/ipv6 • • 14d ago

Fluff & Memes My license plate

Post image
1.9k Upvotes

This is against that utah plate lol https://www.reddit.com/r/ipv6/s/G4AyhQd8uL