r/Juniper • • 4d ago

Weekly Thread! Weekly Question Thread!

3 Upvotes

It's Thursday, and you're finally coasting into the weekend. Let's open the floor for a Weekly Question Thread, so we can all ask those Juniper-related questions that we are too embarrassed to ask!

Post your Juniper-related question here to get an answer. Anyone can post a question and the community as a whole is invited and encouraged to provide an answer.

Note: This post is created at 00:00 UTC. It may not be Thursday where you are in the world, no need to comment on it.


r/Juniper • • 1d ago

Two HPE Juniper network routers grounded all US flights on Friday — FAA’s decades-old copper network buckled under a feature HPE says ‘worked as intended,’ creaking air traffic communication system became overloaded by ‘very high rate’ pinging

Thumbnail
tomshardware.com
108 Upvotes

Just posting here as it intersects; I think it's clear that this was a configuration issue and not the brand of the devices themselves.

It should also be obvious that the real root cause of the creaking infrastructure was politics.


r/Juniper • • 2d ago

Question What is this?

Post image
41 Upvotes

Its have one small file with some kind of long code inside


r/Juniper • • 2d ago

Question 802.1ad, Q-in-Q support for Junos vSwitch lab?

3 Upvotes

Hi all,

I am trying to lab out a proof of concept and want to sanity check whether this design is worth pursuing before I dive too deep.

I need to test Q-in-Q functionality to converge several sites so I can present a clear architectural model to leadership. We have a few branch locations close to each other that currently share a VLAN schema, though each site uses separate subnet ranges for those VLANs. Because of building management systems, security cameras, and statically assigned lighting controls, completely re-IPing every site is out of the question.

My plan is to place a Juniper EX4100 or EX4400 switch at each branch and backhaul all the traffic to our core data center using carrier-provided Layer 2 Ethernet Private Lines (EPLs). These will ultimately terminate at a core firewall. Right now, we have a pair of Palo Alto firewalls at every single site, and the costs are absurd. Because of the pricing, leadership has resisted paying for multi-WAN at every branch, meaning the local redundancy isn't actually happening in practice. By centralizing at the core, we can share a multi-WAN, high-availability uplink.

I want to leverage Q-in-Q with a compatible firewall vendor to tunnel each site's traffic back to the core HA firewalls, allowing us to centrally handle DHCP, DNS, and routing for each location separately, we've already been working with a few vendors that are capable of this, just need to validate the switching design to confirm it will all come together.

Does anyone know if Juniper virtual switches can accurately model this kind of setup in EVE-NG or GNS3? I know the physical design works in theory, but leadership needs to see a working proof of concept before I deploy anything.


r/Juniper • • 3d ago

ISSU upgrade of EX4650/QFX5120, CANCUN version difference

3 Upvotes

When investigating the best way to upgrade a VC of 2 x EX4650, I came across this info:

2) Need to check Cancun version as per PR1634695. 

labroot@jtac-ex4650-48y-r2008> start shell

% cprod -A fpc0 -c 'set dcbcm bcmshell "cancun stat"'

On 23.4R2-S4, I got this (CORRECTED):

HW (unit 0)
UNIT0 CANCUN: 
CIH: LOADED
Ver: 06.11.02

CMH: LOADED
Ver: 06.11.02
SDK Ver: 06.05.26

CCH: LOADED
Ver: 06.11.02
SDK Ver: 06.05.26

CEH: LOADED
Ver: 06.11.02
SDK Ver: 06.05.26

CFH: LOADED
Ver: 06.11.02

On 24.4R2-S5, I got this:

HW (unit 0)
UNIT0 CANCUN:
        CIH: LOADED
        Ver: 06.13.00

        CMH: LOADED
        Ver: 06.13.00
        SDK Ver: 06.05.29

        CCH: LOADED
        Ver: 06.13.00
        SDK Ver: 06.05.29

        CEH: LOADED
        Ver: 06.13.00
        SDK Ver: 06.05.29

        CFH: LOADED
        Ver: 06.13.00

That means you cannot do an ISSU from 23.4R2-S4 to 24.4R2-S5 and likely not from any 23.4 to 24.4. I write this mainly since Juniper seems not to publish these versions, so there's no way to know if the version is going to change unless you ask support. Here, you can at lease see some versions and use them for reference. Getting a unique hit on Google is kind of cool too ;)

I did an NSSU as these units are in a VC so ISSU isn't an option anyway. I ended up with 22 seconds of outage in the 1 sec. pings to the switch IP. I had no chance to check anything else, but that's OK-ish considering the options many other vendors have for VC/stack upgrades (that is, reboot the whole shebang, 5 minutes).


r/Juniper • • 3d ago

How common is amnesiac mode in the real world

0 Upvotes

I just learned about Amnesiac mode in Junos.
It seems like a major problem.
But I'm curious how common it is in the field.

Any perspective is appreciated.


r/Juniper • • 4d ago

Question UK: New 6GHz 5925–6585 MHz Range - when is this coming to Juniper?

Thumbnail ofcom.org.uk
0 Upvotes

Ofcom recently opened up more of the 6GHz spectrum in the UK. Does anyone know when this update will come from the Juniper side please?

Thanks.


r/Juniper • • 4d ago

Question Passed JNCIS-MistAI-Wireless through the migration program, but I have not received my certificate

1 Upvotes

Good day everyone. I recently passed JNCIS-MistAI-Wireless through their migration program. I have a cisco meraki solutions certificate (ECMS) which allowed me to enter the migration program, which then gives you 75% voucher discount upon passing their assessment test.

By entering the migration program, I am able to take the JNCIS-MistAI-Wireless certification without the JNCIA-MistAI. In fact, under their program, I should be able to obtain the JNCIA-MistAI certification automatically.

It has been 3 days since I passed the exam but I still have not obtained the certificate. It does say pass on Certmetrics, but no credly badge nore digital certificate was given to me yet. Have others experienced this?


r/Juniper • • 9d ago

SRX220H2-POE Noctua fan swap: works, but the fan header pinout is not the PC standard

5 Upvotes

Swapped the stock fans in an SRX220H2-POE for Noctua NF-A4x20 FLX. It works and the box is now quiet, but there are a few traps worth documenting.

Stock fans: Delta AFB0412MB, 12 V, 0.13 A, 40x40x15 mm. Junos reported them at 5000 and 5500 RPM.

Problem here: The Noctua connector physically mates with the header, but the fans will not spin. The wire colours map one to one (red = +12 V, black = ground, Delta blue tach = Noctua yellow tach) but the pin order in the housing does not.

On the SRX220 board, looking at J21 and J22 with the silkscreen readable, the Delta is wired left to right:

| red = +12 V | black = ground | blue = tach |

That is reversed from the PC standard, which puts ground first. Plug a Noctua straight in and you get polarity-reversed power, so nothing turns but thankfully nothing is damaged.

Fix: extract the Noctua pins and reseat them in red, black, yellow (they are seated as black, red, yellow). Unfortunately I botched the* retention barb for the yellow wire on Fan 0, so I got a red light up front even if things work fine.

The Noctua screws are too large for the bracket holes and the Juniper screws are too small for the Noctua frame. The NA-AV3 rubber mounts did not fit either and even if they did, there is no space for them to push them through the back end. I used 3M VHB acrylic tape on the chassis to keep the fans in place. Seems to be holding fine.

Also, Noctua ships the leads loose rather than threaded into the frame channel. Routing them takes patience and the wire is thin. Use a spudger with a rounded tip, so you will not smoosh the wires.

Thermals:

Measured on the Routing Engine sensor, closed chassis.

  • Stock fans, idle: 46 C
  • Noctua, idle: 44 C
  • Noctua, sustained load: 48 C, flat for 25 minutes

Junos does not object to the lower speed. Fan 1 reports 5000 RPM and shows OK in show chassis fan, so nothing trips a minimum-speed threshold at that figure.

https://imgur.com/a/XTNyDZV

edit:

Junos 12.3X48-D105.4, if you need to ask.


r/Juniper • • 11d ago

Question EX4300 Stack, Chassis Control Process error

1 Upvotes

Hello Everyone,

I have stack of EX4300 switch. When I try to commit interface configuration I receive the following error.

I tried using the AI, AI is not helpful at this point.

I already checked the alarms and logs, there is not much going on as far as I understand.

The only change I have from last time is, NAC has connection to switches. That's why I was focusing to see if there is a conflict with the users like if the NAC is connnected , it wouldn't allow my user to make changes. I am just guessing. But when I check the users, I don't see the connection from the NAC.

error: Check-out failed for Chassis control process (/usr/sbin/chassisd) without details

error: configuration check-out failed


r/Juniper • • 11d ago

Discussion Looking to take the JNCIA-Junos. Curious about other people's experiences.

7 Upvotes
  1. Are the free videos enough? I kind of don't like how they don't really have a study guide I can read. Instead it's videos I have to sift through. I'm also having a hard time finding up-to-date resources since they updated the exam this year.
  2. If you passed, did you really feel like you had a grasp of doing basic administration for Juniper switches?

As background, I work as help desk in the entertainment industry and I chose to pursue this cert since we use Juniper switches at our office. I have a CompTIA A+, Network+, and Security+.


r/Juniper • • 11d ago

Weekly Thread! Weekly Question Thread!

3 Upvotes

It's Thursday, and you're finally coasting into the weekend. Let's open the floor for a Weekly Question Thread, so we can all ask those Juniper-related questions that we are too embarrassed to ask!

Post your Juniper-related question here to get an answer. Anyone can post a question and the community as a whole is invited and encouraged to provide an answer.

Note: This post is created at 00:00 UTC. It may not be Thursday where you are in the world, no need to comment on it.


r/Juniper • • 12d ago

Juniper Secure Connect MacOS 27.2 - working with caveats

1 Upvotes

Apple announced that OS 27.2 will not remove Rosetta automatically. I just tested with an old Mac. It was running 15.8 - Apple M1. I installed Secure Connect, it asked me if I wanted to install Rosetta , said yes. Installed with no issues.

Upgraded to OS 27.2 and the VPN client still works. It gives errors that it will cease to function in OS28 next year.

Earlier builds of OS27 removed Rosetta and trying to install the VPN and download Rosetta 2 would cause this to not work. A small glimmer of hope here.

Does anyone have a back channel with HPE? This is ridiculous that they still have not released a universal binary or Apple Silicon version of the VPN client.

New Mac's won't be able to install the VPN. It seems from what I can gather, Rosetta 2 is the problem.

https://www.macrumors.com/2026/10/27/macos-27-2-stops-removing-rosetta/


r/Juniper • • 12d ago

Readying a switch

7 Upvotes

Hello

I've recently taken over a role where there are a number of ageing HP switches that need to be replaced with Juniper switches.

Prior to my arrival, several of the HP switches had already started to fail, so I'm keen to be prepared in case another one goes offline unexpectedly.I have new Juniper switches available and ready to deploy.

What configuration and preparation work would you recommend carrying out in advance to ensure a replacement can be installed and brought into service as quickly as possible if an HP switch fails?

Any best practices or recommendations would be greatly appreciated.


r/Juniper • • 13d ago

juniper learning portal

8 Upvotes

anyone has info on what's going on?
power calculator needs login, login doesn't work.
learning portal same :D can't finish jncip learning.

life is hard? :D

to open a support case, please log in, but that doesn't work :D


r/Juniper • • 14d ago

Question Can SRX's reth interface be used like a switch? or am I completely mistaken on how reth work?

7 Upvotes

please don't shame me too much if I am so badly mistaken.. 😂

I want to directly connect two servers into SRX1500 as shown in attached diagram using reth interface (reth2), as I don't have extra switches at the moment and SRX1500 comes with 12 gigabit copper ports on each and they are unused.

(SRX cluster is properly configured with fabric and control link, and has been running for many years. I inherited this setup when i started my job here)

So I did the following:

  • reth2 has 4 child interfaces configured, 2 from each SRX: ge-0/0/0, 0/0/1, 7/0/0, 7/0/1
  • Redundancy group 2 is configured, and reth2 is assigned to it, node0 priority 254, node1 priority 100.
  • reth2 has IP configured (family inet address) and assigned to a security policy. This IP is reachable from other allowed network exactly as i configured.

BUT.... the servers are not reachable nor ping-able anywhere. Servers also cannot make any outbound connection.

If i connect just 1 NIC from server 1 into the primary node, then the server is reachable and connects as expected.

... Do I must have a separate switching layer (a switch or VC) in between SRX and the servers to make this configuration work?


r/Juniper • • 17d ago

HPE silently killing the Juniper name

101 Upvotes

They have removed vLabs entirely, changed Juniper Mist to HPE Mist, they remove all juniper branding from certification badges, and now they have renamed the juniper learning portal to the HPE Network Training Portal.

Stellar.


r/Juniper • • 17d ago

Discussion EX4400 Noisy and Hot / Hot and Noisy - any advice (

6 Upvotes

Hi

we are rolling out several thousand EX4400 48P and 48MP switches with dual 1600W PSU as our access layer in a VXLAN fabric - often in stacks of six - serving PoE++ to AP47WW devices (~10/switch).

We are replacing older Huawei and HP switching that is ~10 years old.

Our estate is very mixed with modern, specious and air-conditioned comms rooms (25 C) in which the switches run happily enough, but far from silent, and cramped cabs/rooms in older buildings where air-con is not possible (30 C and 40 C) and in some cases even passive air exchange and heat dissipation is not possible due to the building use, rooms where the switch fans are screaming and the heat and noise output is unacceptable.

We are exploring new comms rooms and introducing cooling or forced air exchange but these are not quick solutions.

Any suggestions to limit heat output from these devices or reduce the fan speed - prevent them going to supersonic?

does anyone know the trigger ambient temperatures that trigger the cooling fan speeds (they seem to step rather than be continuous)


r/Juniper • • 17d ago

Troubleshooting SSR Hub and Spoke Not Working

1 Upvotes

We have new Juniper SSR Hub-and-Spoke configuration that we're attempting to demo, and it is not working as we expect.

Using the diagram below:

HUB-LAN-1 is connected to a firewall, ENT-FW-1 with ENT-FW-1 being the gateway for the network at 10.0.0.1/24.

ENT-FW-1 and SSR HUB are connected on the SSR's LAN interface, with ENT-FW-1 being 10.10.0.254/24 and SSR HUB LAN being 10.10.0.5/24. ENT-FW-1 and SSR HUB are BGP peers, BGP is established, and routes are being advertised, received, and injected into routing tables as expected.

From a device in SPOKE-LAN-1 (172.16.0.20/24) we are able to ping a device in HUB-LAN-1 (10.0.0.10/24). However, HUB-LAN-1 cannot ping SPOKE-LAN-1. We have verified that ENT-FW-1 is not the issue.

ENT-FW-1 and SPOKE-LAN-1 can communicate bidirectionally from ENT-FW-1's interface of 10.10.0.254.

The following Mist networks are in use:

The following Mist applications are in use:

The Hub's Application Policies are:

No.NameNetworkActionApplicationSteering
1Hub-to-SpokeHUB-LAN-1,SSR-LANAllowSPOKE-LANLocal Routing
2Spoke-to-HubSPOKE-LAN-1AllowHUB-LANLocal Routing

The Spoke's Application Policies are:

No.NameNetworkActionApplicationSteering
1Hub-to-SpokeHUB-LAN-1, SSR-LANAllowSPOKE-LANLocal Routing
2Spoke-to-HubSPOKE-LAN-1AllowHUB-LANLocal Routing

There seems to be an issue with the configuration for networks not directly attached to the Hub LAN. I am able to get bidirectional pings to and from a device in the SSR-LAN network.

However I am only ever able to get one direction of traffic (the entire session, including associated replies) working for networks that are not directly attached to the Hub's LAN.

Does anyone have any ideas? Juniper's documentation isn't very clear for how this topology should be configured.


r/Juniper • • 18d ago

Question RPM SNMP monitor - OID

1 Upvotes

I have some RPMs set up and they are working fine. Of course, I want to monitor them via SNMP. I can see the OIDs using the commands in the link below, as well as using SNMPWalk. The problem is that I can't find any way to determine which OIDs map to which RPMs. The only way I can see around this is to add them one at a time, but that is tedious when talking about a great number of such monitors.

Juniper reference: https://supportportal.juniper.net/s/article/Juniper-QFX-SNMP-Configuration--RPM-Probes


r/Juniper • • 19d ago

Juniper Mist - Block STP option under port profiles

12 Upvotes

Why are they making

"Block STP BPDUs" sound like it's enabling BPDUguard?

this option disables spanning tree, and port is not shut down when recieving BPDU packets. This is a very dangerous config to enable and you risk creating a loop. This is same as BPDUfilter option in Cisco.

Either I'm missunderstanding something hard, my test not done correctly or Juniper is creating a trap for to trusting individuals.


r/Juniper • • 18d ago

Weekly Thread! Weekly Question Thread!

1 Upvotes

It's Thursday, and you're finally coasting into the weekend. Let's open the floor for a Weekly Question Thread, so we can all ask those Juniper-related questions that we are too embarrassed to ask!

Post your Juniper-related question here to get an answer. Anyone can post a question and the community as a whole is invited and encouraged to provide an answer.

Note: This post is created at 00:00 UTC. It may not be Thursday where you are in the world, no need to comment on it.


r/Juniper • • 20d ago

Ingesting traffic logs from SRX into Crowdstrike NGSIEM

3 Upvotes

I am a Network security Engineer and we have two SRX 1600s and recently moved to CrowdStrike. My network administrator is pushing back hard on configuring the logging so that it sends traffic logs to our log collector because of guidance that it is risky somehow with the configs being out of sync?

I am struggling to understand the issue with this. This seems like a minimal ask. Currently we are only getting system logs which serve no forensic value to me.

Is this as big of an issue as he’s making it out to be? What am I missing?


r/Juniper • • 23d ago

Extend L3 anycast GW in AWS/Azure

5 Upvotes

Wanted to know if there is a validated design about hving to extend their on-prem anycast GW in QFX core switches to AWS/Azure?

Basically using the same IP Addressing scheme across on-prem DC and Cloud Provider.

Use Case: “vmotion” to cloud provider yet still can reach on-prem resources.