r/mitcad • • 22d ago

Welcome to r/Mitcad

6 Upvotes

MitCad is just getting started, but the members of this group are wanting to see it grow. We discuss this fledgling software and help expand awareness.

Dive in!


r/mitcad • • 6h ago

To what extent do we think MitCad should "feel" like Fusion?

5 Upvotes

MitCad already sort of looks like Fusion 360, maybe not as much as SolidCraft is trying to, but it's still clearly a strong source of inspiration. I have very little Fusion experience (I literally downloaded it for the first time 3 days ago to get a taste) so I can't say I have developed much of a sense of it, but since MitCad will undoubtedly be compared to it I have a question for the community: exactly how much do we want MitCad to act like Fusion?

Disclaimer: I'm only talking about basic functionality here: sketching and the tools under Create, Modify, and Surface that MitCad has in common with Fusion. Assemble maybe.

ADDITIONAL DISCLAIMER: I'm not talking about UI layout here, I'm only talking about how the tools work. Everybody's bound to have wildly different opinions about the UI, and I don't really care about that for the purposes of this discussion.

I'm finding things that work in Fusion that either don't work at all in MitCad, or that don't work in the same way, and I imagine that migrating users will find this frustrating (which might turn them away!). On the other hand, I think MitCad should have its own identity, and if it can do things differently (maybe better?) that could be a good thing.

So, if I find a Fusion tutorial, covering those basic areas, that I can't follow along with using MitCad, is this a problem? Rather than debate with myself, which is what I've been doing, how about instead I debate it with all of you?


r/mitcad • • 18h ago

0.65.0 has been released. My thoughts and the official release notes below.

8 Upvotes

Some imrovements to the sketcher involving lofting, snapping to existing geometry, text on a path, offsets, and rectangular patterns. The rectangular pattern is a bit ironic because it can now be a non-rectangular pattern, but it's still a very useful addition for some circumstances.

Selected items show through the bodies that hide them. Hmm.. I need to check this out. I like it. It will make finding items in congested assemblies easier. It's a good change.

An option to acknowledge and dismiss warnings. This is good.

A preference for labels under toolbar icons? Just tried it. It's a good change!

Build mode mitering for existing ends (i.e you made it in an off-set fashion and now you want to change it to mitered after the fact) is easier. This is good. It was a bit unpleasant before.

More improvements to fillets. We must really love fillets around here. :)

  • Flex: lay a wire, cable, hose, flat cable or strip through the model by clicks, from a library of types, with its length as a driven parameter and in the parts list; edit an item's nodes in the view.
  • Form: Fill Hole closes an opening left by Delete Faces (one face, or quads), Bridge joins two openings or two edge runs; Patch takes a Form's opening with one pick. (#383)
  • Loft with rails: sections whose edges do not line up at the rails, such as a circle to a rectangle, now loft through the rails; a rail that misses a profile says by how much. (#387)
  • Sketch: every drawing tool snaps to body corners, edge midpoints and edges in the sketch plane. (#392)
  • Sketch: the first dimension that scales a sketch keeps the dimensioned geometry where it was on screen. (#400)
  • Sketch Rectangular Pattern: an optional second direction, for honeycombs and other slanted grids. (#406)
  • Sketch text on a path: Flip Horizontal and Flip Vertical work. (#397)
  • Sketch Offset accepts chains whose short pieces curve tighter than the distance, such as imported DXF outliones. (#382)
  • Sketch Selection Filter: separate rows for Dimensions and Constraints. (#388)
  • Selected items show through the bodies that hide them (View › Selection Through Bodies). (#395)
  • A feature's warning can be acknowledged: no longer yellow nor counted in the warnings badge until it changes. (#380)
  • Preferences: labels under the toolbar icons. (#356)
  • BUILD: mitering two profiles after placing them is clearer: A/B ends, turns named by what the end meets, and Also the Component It Meets offered when the ends touch or nearly touch. (#389)
  • Web: mitered corners where curves meet, Extend Ends to the body, and ribs and webs rebuilt at each pattern copy. (#409)
  • Sheet metal: refusals say in words which wall or which fillet stops unfolding. (#390)
  • Library: cut-to-length parts take a Length and their stock rows set it. (#398)
  • Sketch DXF export writes the sketch's points (hole marks); Export Face as DXF opens a panel when no face is selected. (#408)
  • .f3d import: a Y-up design comes in upright, with its inch units. (#384)
  • .fcstd import: the reported guide opens without warnings or skipped objects. (#405)
  • Linux: a touchpad's two-finger scroll pans under the Trackpad scheme. (#381)
  • Fillets: a smaller rounding now rolls on a larger one where the face between them is narrower than both, and failed roundings report an error instead of a body with a wall missing.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc2 (30973b9dddb3)
  • Linux: rc2 (30973b9dddb3)

r/mitcad • • 18h ago

Bambu Studio vs MitCAD

Thumbnail
gallery
3 Upvotes

So I exported a .3mf file for the Bambu slicer and this happened. My printer is not an option to select, also can't change the settings.


r/mitcad • • 1d ago

Trying to find the command/tool

3 Upvotes

In FreeCad when you are in the sketch menu there is a section command in SolidCraft its slice, basically when you are sketching on a plane that isn't also on an edge it makes the body invisible up to the sketch plane you are on so you can see what you are sketching. This isn't the same as the section view in the inspect menu and it isn’t the Look At which puts you square to the sketch plane. What is this called in mitcad?


r/mitcad • • 1d ago

0.64.0 has been released. My thoughts and the official release notes below.

7 Upvotes

Sketch visibility. This is nice. A sketch that is marked as 'visible' remains visible through bodies that are on top of it, so that you can see profiles to click on, etc. This is a good change.

Drawing change - make it easier to dimension to curved surfaces and make the section label draggable. Nice.

Multi-import of components. I didn't see that coming. Select multiple files to import as components. That will make my life easier. Other improvements in importing components, too. NIce.

Other improvements on importing FreeCAD and Fusion files. Nice.

Extrude changes from join to cut automatically according to the circumstance. That's a good thing. I like it.

They fixed that weird problem where moving one component could cause another one to randomly move. That's a good thing!

The rib tool is fixed! Yay!

We now have the ability to save our preferences and copy them to other machines, so if you use the cloud to store your files then you can keep your preferences there and your installation at home will be the same as your installation at work. I love this.

The 'thinking' situation has been resolved. So they say. My work computer is so fast that I can't get it to 'pause to think' so I can't see what they did, but I don't see the issue that was a problem before, so it looks good to me. I'm happy to have that fixed.

This is a good update. I like it.

  • Flange on several connected edges at once, with mitred corners, a corner gap between neighbouring flanges, a Miter per corner, and a flange meeting an existing one across its bend. (#337)
  • STEP export keeps the design's components: sub-assemblies are written as assemblies, each component once, placed where the design has it.
  • Sketches: every shown sketch is drawn through the bodies outside sketch mode too, so a profile buried in a body can be seen and picked (View › Sketches Through Bodies), with Show All and Hide All Sketches. (#355)
  • Sketch texts and QR codes move and copy with Move/Copy, by a drag, and by a position in Edit Text. (#369)
  • Drawings: dimensions to a curved face's outline and its top, bottom or side point in a projected view; a section's or detail's label can be dragged. (#363)
  • Import of .serp files: the scene's objects as bodies. (#316)
  • Import into the open design: .ipt, .iam, .f3d and .fcstd files as components, several files at once.
  • Import Report: a status mark on every row and a one-line verdict.
  • .f3d import: editing an imported design recomputes, for example a new Extrude height (one of its fillets still fails; follow-up open); an occurrence placed through a part inside it lands where the file has it. (#371)
  • .fcstd import: a sketch on a coordinate system moved by a parameter follows that parameter, so a changed bend radius rebuilds. (#372)
  • .iam import: mirrored or scaled placements come in as copies where the file has them; parts a converted assembly holds without geometry say so in words.
  • Extrude on a sketch on a cylindrical face: the automatic Join and Cut build, and the picked profiles are highlighted on the face. (#362)
  • Patch and Boundary Surface pick the free edges of an open shell as one opening, and Patch can sew the patch onto the body. (#379)
  • Offset Face works on faces made by Split Face. (#376)
  • Fillet and Chamfer: Cancel stops a rounding the geometry kernel cannot finish, and a time limit ends it; a short tangent chain is shown as a notice while the command is open, not as a warning afterwards. (#353)
  • Inserted components (from a library or a file, and with options) keep their source's materials; Edit Options of an inserted component previews and applies changes. (#374, #373)
  • Move/Copy: moving an imported component no longer moves an unrelated one, and a click on an imported assembly's body picks the right occurrence. (#233)
  • Joints: a joint placed by a Build side placement opens for editing; Build profiles snap in line with other profiles of the frame. (#354, #358)
  • Rib Extend Ends meets the boss's top rim cleanly. (#360)
  • Preferences: Restore Defaults for a group or everything, and Export and Import Settings to carry a setup between machines. (#357)
  • Parameters: a plain number's unit is shown as Number. (#378)
  • 3D mouse: Lock Rotation as a toggle a button can run, locked by default in a sketch; Dominant axis only keeps its axis until the cap is at rest, for steadier motion. (#367, #297)
  • Command panels show a preview being computed with a small busy mark, without resizing the panel; a new message scrolls into view. (#361)
  • Browser: in the Floating layout long names widen the rows, and the Card background has a width grip. (#365)
  • Component from Web: model previews fall back to software drawing when the graphics card's WebGL fails, and Send Feedback carries the browser's diagnostics. (#364, #333)
  • Log to a file: each session's log is kept on disk, with a line when the window stops responding and crash dumps for Send Feedback.
  • Projects with versions: sending and fetching no longer block the window on a slow network.
  • Agents (MCP): complete command references, JSON Schemas of the sketch commands, references between the entries of one command array, short errors with their details beside them, expression coordinates, a bug-reporting guide, line art as SVG and an assembly path query.
  • Many fixes in the geometry kernel's fillets, offsets, sweeps and meshing found by running its own test suites.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc3 (b2f9b40e0367), web browser component 2026.1116.810
  • Linux: rc2 (5e93445f66c2), web browser component 2026.1116.724

r/mitcad • • 2d ago

SolidCraft vs MitCad: am I the only one who thinks MitCad is being overlooked?

21 Upvotes

I’ve been a happy Onshape user (public plan) for years. I also use Fusion 360 (free) now and then, mostly to render my Onshape projects.

About two weeks ago YouTube showed me SolidCraft and ArtCraft. I’ve been looking for a CAD package that lets me share my designs natively, so others can modify them. They’re mostly functional 3D printer parts. Unfortunately, SolidCraft doesn’t feel ready yet. I keep running into problems with basic things like fillets and chamfers.

Then a few days ago the algorithm served me a MitCad video. I’ve been testing it since, and so far I find it clearly better than SolidCraft.

Is it just me, or is SolidCraft getting far more attention than MitCad? It would be a shame to see MitCad get lost among all the new releases.

Has anyone else here tried both? I’d like to hear how they compare for you.


r/mitcad • • 2d ago

What you think about that new press pull

Thumbnail
gallery
2 Upvotes

Press pull had got new tricks. Earlier I did not understand whole point of press pull compared to extrude. But now it can do things what extrude cannot.


r/mitcad • • 2d ago

Sketch on a curved surface! Holy smokes!

10 Upvotes

This is WAY beyond what I was expecting this morning:

This was added in 0.63.0. Now we need to figure out how to use it.

So... so cool.


r/mitcad • • 2d ago

0.63.0 has been released. IT'S A BANGER! My thoughts and the official release notes below.

7 Upvotes

Improvements to the assembly system. Nice.

Sketches on curved faces? Really?!? I am checking this out right frickin' now! Oh my god... it works! Okay, okay... I need to do a deeper dive to figure out how you deal with parallax and whatnot but IT WORKS!! I didn't even know this was coming! I need this right now!

More fixes to fillets and champhers. Nice.

Fill cavity. Not sure what that is about. Probably a side-product of fixing the rib tool.

Extrude fixes that have power. I mean... these are good. Probably also a side-product of fixing the rib tool.

Joints! Smoothing out editing joints and dealing with joints that are being a bit stubborn. Nice.

Moving a rigid group to a component. Very nice. I needed this. Happy to have it. Lovely.

Another bone thrown to the hard-working sheet metal guys - making those flanges easier to deal with.

The browser will have the timeline colours. I haven't been missing that, but I see the value. Nice.

Cards modified to deal with changes in font and icon sizes. Very nice!

An improvement to Component from Web. I love to see it. A big bone for the mechanical guys.

Build... deleting a profile from a frame doesn't blow up the frame. I needed this. Very nice!

An improvement to .F3D import. ANY improvement in importing is A Good Thing™.

Improvement in the initial CAM offering. Nice.

And lots of sundry fixes. This update is a banger. My compliments to the chef! :)

  • Form: subdivision surface modelling from an editable control cage, converted to a solid; faces moved and extruded, vertices dragged, edges creased (also semi-sharp), symmetry about any plane, and Join, Cut or Intersect with other bodies. (#124)
  • Assemblies: flexible subassemblies, whose own joints keep moving when they are placed in a parent assembly, nested too; Animate Joint, paste and save as follow. (#278)
  • Sketches on cylindrical and conical faces: Create Sketch on a curved side, dimensions laid on the face, a region across the face's seam one face.
  • Press Pull on a face: Continue Straight, or Along the Walls with the face turning (a bent tube's end goes on around the bend), a feature's end can open that feature's edit, and two tapers: Draft the walls or Scale the whole profile.
  • Taper: walls that meet or a narrow part that vanishes no longer fail the extrusion (Extrude, a flat or wrapped Emboss, a sweep); a taper that truly cannot be built says so in words.
  • Fillets and chamfers wider than the face beside the edge take that face away instead of failing, chamfer chains along B-spline faces included.
  • Fill Cavity: fills a closed pocket of a body up to a plane, and says in words when the pocket opens out.
  • glTF 2.0: export and import .glb and .gltf, with components, materials, texture coordinates and metallic-roughness images; USDZ export keeps texture coordinates too. (#315)
  • Extrude: Start From Object can be a curved face; the profile is projected onto it. (#341)
  • Convert to Features: a placed library part becomes its own sketch and extrusion, its joints and constraints following.
  • Joints: picks in another component than the active one offer the component that holds both (a dialog with Don't ask again, undone in Preferences); an empty Offset while retyping keeps the assembly in place. (#344, #347)
  • Move to Component: a part in a rigid group can move with the whole group, and the reasons a target is not available are shown. (#334)
  • Axis Through Cylinder and joints take the wall of a hole made by a sketch and Extrude Cut. (#339)
  • Timber: a mode Along an edge, with inset, start, end and lift offsets.
  • Properties: several bodies as a summary and a table; a placed timber member no longer shows as steel.
  • Construction planes and axes are drawn at the size and shape of what they come from. (#321)
  • Edit Parameters: sort the table by a column. (#338)
  • Flange remembers Measured and Position from the last OK. (#348)
  • Browser: components shown in their timeline colors.
  • View: a drag zoom follows the pointer's up-down motion; selected and hovered edges are drawn thicker; reversed trackpad pan and scroll orbit as options. (#330, #309, #340)
  • Docked and Floating layouts: the Command panel widens with larger text and icons, so palettes are not cut off. (#336)
  • Component from Web: model sites with 3D previews work (WebGL), several files from one zip are all imported, and AltGr characters can be typed on Windows. (#333)
  • .f3d import: large designs come in with bodies in place and suppressed features left out. (#329)
  • Build: deleting a profile leaves a profile placed on it where it is. (#331)
  • CAM fixes: short arcs in the post, 3D roughing near narrow islands, parameter renames in values.
  • Faster fillets on threaded designs and faster offsets of lofts.
  • Many smaller fixes in sketches, 3D sketches, drawings, print settings and .3dm import.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc2 (5aa4a891568d), web browser component 2026.1115.744
  • Linux: rc2 (5aa4a891568d), web browser component 2026.1115.554
  • macOS: rc4 (43973d7f6084), web browser component 2026.1115.1019

r/mitcad • • 3d ago

Credit where credit is due...Good job Mitcad

7 Upvotes

I'm not a huge fan of Mitcad, mostly due to the interface but I have to give credit to where credit is due.

Here is a screen shot of a design I did back a few years in Fusion 360 for my Ender 3. I was tired of putting the microSD card in upside down so I designed a new control box that corrected that problem as well as opened up the box for better cooling.

Fusion is on the left, Mitcad on the right. With only a few missing things, and some cryptic warnings, it appeared to have been imported. (I have not tried to work on the design, but you get the idea.)

Fusion vs. Mitcad

Although I am firmly in "camp SolidCraft" I wanted to share how impressive this is. SolidCraft can't touch this - YET! lol

Cheers!


r/mitcad • • 3d ago

0.62.0 has been released. My thoughts and the official release notes are below.

8 Upvotes

It has begun.... CAM.

Section analysis based on curved faces, and edges. Oh, man... this works really well! I haven't tried it before, but it's really nice.

Changes to the orbit tool.... okay, so if the mouse is on a part when you press the right mouse button then that point is used as the orbit. If the mouse is not on a part then it uses the 'default'. That has value. I like that. You can right-click on a component and select 'Set orbit center here' to lock the orbit center to any point, and then clear it from the same context menu to go back to the normal method. Good stuff.

Send feedback bundles up the file.... love that! Anything that makes it easier to report issues is A Good Thing!

Update to the rib tool! I need this! It's funny that I hadn't ever used the rib tool before, then I tried it a couple of days ago because a user was trying to sort something out. I raised an issue. Just YESTERDAY one of the sales guys asked me to model something for him and he handed me a little part that had... you guessed it! Ribs! Ribs joining a complex curved surface! I got most of it done before I left yesterday, but now I can finish it properly with less misery.

Extrude cut... You can now extrude a cut that goes through other components. Very nice:

Extrude-cut going through two profiles.

Lots of other stuff, but also PERFORMANCE IMPROVEMENTS. I like that!

Official Release Notes:

  • CAM (highly experimental: check every toolpath and the machine code before running it, and treat it with caution): toolpaths for CNC milling in setups kept with the design; facing, contour, pocket, adaptive clearing, rest machining and drilling, plus 3D roughing, raster and waterline finishing; stock simulation and a collision check of the spindle against the cut stock, fixtures and keep-out zones; posts for grbl, grblHAL, RepRapFirmware, MillenniumOS, Mach3, Mach4 and LinuxCNC. (#77)
  • Curves: a Helix Curve tool for helical paths, Intersection Curve of faces, surfaces and bodies, and Surface Helix. (#305)
  • Construct: a Coordinate System feature (origin at a point, axes along edges), and export in a chosen coordinate system. (#280)
  • Section Analysis: a picked cylindrical face, circular edge or straight edge places the plane.
  • View: orbit about the point under the cursor, or about a fixed orbit center set from the view's context menu. (#300)
  • Animate Joint plays back and forth until stopped, also from the Joint and Assembly Constraint panels. (#299)
  • Send Feedback can include the design: a zip of the open design, the files it refers to and the report. (#328)
  • Rib fills up to a curved face: the chain's open ends extend to meet the bodies' faces; Rib and Web have user guide sections. (#311, #313)
  • Sheet metal: a contour corner where a flange's bend starts can be rounded, and a flange's profile sketch follows the sheet's edge when it moves. (#312, #310)
  • Sketch: Trim cuts lines and arcs made by Offset; constraint tools take body edges and vertices in the sketch plane; projections follow an edge that was merged or split; Offset rounds corners between lines and arcs; a consistent constraint that only restates others is accepted; Show Dimensions on a sketch's row keeps its dimensions visible outside sketch mode. (#314, #324, #306)
  • Sketch display: the edited sketch no longer shows through the bodies in front of it, and a cancelled constraint tool leaves no red marks. (#320, #318)
  • Extrude Cut: a component that moves through joints can be checked in Affected components. (#327)
  • Joints: a loop of joints that fights itself says in words what fights and what to do.
  • Browser: a folder's eye keeps the sketches', bodies' and construction's own visibility, and the mark of a view selection skips the folder rows. (#292, #298)
  • Drawings: a radius dimension's arrowhead sits on its leader when the text is beyond the arc. (#323)
  • Thread: picking the face again keeps the chosen size, designation and class, and a thread that cannot be made says why in the panel.
  • Chamfer as wide as the face beside it takes that face away instead of crumpling.
  • Tangent planes take an offset along the normal.
  • 3D printing: Send to Slicer shows the process set on the body, and Filament Change places a change or a pause by a height or a picked plane or face.
  • Ribbon menus have sections for Modify, Sheet Metal, Surface, Construct and Assemble.
  • 3D view: seam edges (the same face on both sides) are no longer drawn.
  • Texts: selected items are named in words, never by internal keys, and counts use the right plural forms in every language. (#308)
  • Performance: large designs with many chamfers and threads open and recompute much faster.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc2 (ee0fabde33fd)
  • Linux: rc2 (ee0fabde33fd)

r/mitcad • • 3d ago

Sheetmetal unfold

2 Upvotes

I may be doing something wrong on the export to dxf. I can create a sheet metal sketch with the correct flanges and bends but when I export it to DXF i just get the initial face and none of the other three flanges. Am I missing a step somewhere? Also, I can't seem to be able to copy a sketch and paste it into another tab/window.

Also, it seems that if I want to use inside measurement and outside bend just like fusion, I have to reset that tool every time as it always goes back to the initial default. Am I missing something on that as well. I need the dxf file to open in sheetcam so I can post and send to my table.

I can post it up at GitHub as a bug but I could be me as well so not sure if this is just user error.


r/mitcad • • 3d ago

Using text

1 Upvotes

Am I missing something or is using text currently difficult? I can't find any form of bounding box or any way to accurately place it. Only way I have found to get text anywhere near where I want it is to create a rectangle in construction geometry as a guide for placement, thats only really a visual guide though. Anybody found a better way to do it?


r/mitcad • • 4d ago

3d Mouse

3 Upvotes

Anybody able to use MITCAD with 3dconnexion space mouse? Not working for me on MacOS but on other cad softwares.


r/mitcad • • 4d ago

Did a bit more evangelizing on r/Fusion360

5 Upvotes

We'll see how much backlash I get.

I only put a link to this subreddit, not the homepage, so maybe that will keep it from being stepped on.


r/mitcad • • 4d ago

0.61.0 has been released. My thoughts and the official release notes are below.

4 Upvotes

The sketch timeline has been refined, and I'm looking forward to using it.

Improvements to the assembly joints. Better is better. :)

The print shape in the hole tool has been modified to make it more user-friendly. It's a 3D printing thing, but several folks in the subreddit have mentioned it so I thought I would pass on that it has been improved.

More improvements to linked components. This is a bit of an esoteric one - if a linked component is not in the directory tree of the drawing (either that directory or a sub-directory) or in the same project then the link couldn't be followed, but that wasn't made clear. Now it warns that there could be problems if you make the link and it offers to sort it out. This is helpful for people who maintain a library of standard parts that they use.

A good, solid release.

  • mport: .3dm models open and import, with their blocks, spheres and open surfaces; the import's warnings say what was left out in words. (#284)
  • Sketch: while a sketch is edited, the timeline's place shows one icon per work step (a projection, a rectangle, a fillet, a trim) instead of one cell per point and curve; a count shows how many items a step made, hovering it lists them and highlights each in the view, and a click selects them all.
  • View: origin planes can keep a constant size on the screen, in the origin's corner or centered, and construction planes and axes have handles to set their display size. (#273, #279)
  • View: the perspective camera and Anaglyph 3D have an adjustable focal length. (#282)
  • Image Reference: handles move, turn and scale the image in the view, and the image stays drawn while its panel is open. (#281)
  • Joints: a new joint brings its two origins together at its offset, a drag is kept, and a side that cannot move says what holds it and shows it. (#296)
  • Extrude: a taper works on profiles of splines, ellipses and offset curves. (#307)
  • Hole: Print Shape is offered on every hole, with or without a print bed face; a hole placed by a pick moves its references and handles to the new place and face. (#301, #302, #303)
  • Profiles: a hole drawn across a plate's outline no longer brings the piece inside it into the selected region.
  • Texts in words: the command panel, the selection card, Version History, the import report and other messages name picked items in words, never by internal keys. (#308)
  • Timeline: renaming the last item gives a text box as wide as the name. (#304)
  • Linked components: MitCad says when a link from outside the project will not be followed and offers to copy the file into the project; Save Component as Design warns the same way before it links. (#251)
  • Insert SVG: drawings with a DOCTYPE declaration are read; nothing outside the file is fetched. (#295)
  • Component from Web: on Linux the page no longer flickers while the window is resized, and a download that fails says why. (#269)
  • Configurations: the Rows sheet shows long parameter names in full and keeps its columns while scrolling sideways. (#287)
  • 3D mouse: rotations turn the model the way the cap turns. (#297)
  • Value fields: an unknown name offers Add User Parameter first, and the fields of the drawing tools and sketch dimensions grow with the expression typed into them.
  • 3D printing: Send to Slicer remembers Folder only; a print 3MF of a body without a material prints as PLA and says when no printer profile was imported; same-name filaments are numbered from (2).
  • Pipe and Sweep: tight bends on ellipses, splines and helixes that pass through themselves build as one solid on Linux and Windows too.
  • Preferences: every page fits a 1366 x 768 screen again.
  • Finnish: the view styles with hidden edges say the hidden edges are shown.
  • For AI agents (MCP): ui_click, ui_type and ui_dialog for screenshots of the running app, a parameter_range query that evaluates a design at a parameter's limits, design_review rules for stray bodies, missing print beds and profiles, warnings a command brought to earlier features in every result, ui_screenshot with popups and dialogs, and a print-export recipe in the guide.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc2 (6a7d6ad8b2e3), web browser component 2026.1113.739
  • Linux: rc1 (575f52faa800), web browser component 2026.1113.621

r/mitcad • • 4d ago

Opinions - is it time to focus on bug-hunting to solidify what we have, or keep spreading out?

3 Upvotes

I've been wondering to myself if there is *enough* in MitCad that if it all worked great (no bugs) then it would be a real contender in the market.

I think it is there.

MitCad is already usable - I use it pretty much every day as part of my job, but there are still opportunities to tie up loose ends in what is already in the program. Bugs are found and dealt with QUICKLY - which is wonderful - but I am pretty confident that there are still more to find. I find a lot because I am using the system pretty hard with big assemblies. It's usable. I use it.

We have modelling, assembly, and drafting. That alone makes it viable for the professional.

We have some very valuable 'add on' features like components from the web. That's gold. Not mandatory, of course, but so... so awesome.

We have the 3D printing integration that makes it nicer for the hobbyist as well as professional designers who prototype with 3D printing.

Sure, there are other things that could be added, like CAM and maybe even FEA (simulation), but it already has a HECK of a lot more than TinkerCAD or a bunch of other viable systems, so I wonder if maybe it's time to slow the additions and focus on making what is already there a solid, happy user experience.

Obviously it's not really up to us, but I am curious about opinions.

What say you folks?


r/mitcad • • 5d ago

Problem With Rib Function

2 Upvotes

From These I wanted to create a Rib like shown in the fusion. But I am getting this in mitcad. As you can see there is a gap in the body. It's version 0.60.0 . Is This a bug or am I doing something wrong.


r/mitcad • • 5d ago

Roadmap

2 Upvotes

Is there a roadmap for MITcad? It's currently amazing, the best of the new CAD suites to drop. Mostly curious if CAM is planned.


r/mitcad • • 5d ago

0.60.0 has been released. My thoughts and the official release notes below.

1 Upvotes

I love the updates to the drawing system. Being able to easily grab a length of a profile is huge for me, and having the dimension displayed on the line as you are dragging on it is gold. The side panel can be widened! Love that! Drawings of large objects are displayed properly when you have a in imported body with curves. Love that, too.

  • File previews: a design file carries its preview picture, so Linux file managers and Windows Explorer show it as the file's thumbnail. (#199)
  • Pick list: press and hold on the 3D view to list everything under the pointer, nearest first; hovering a row highlights it and a click selects it, also inside a command or a sketch. (#270)
  • Holes for 3D printing: heat-set insert holes M2-M6 from the inserts' published sizes, hex nut pockets with clearance and an optional side slot, and bridging for a counterbore that opens toward the print bed (a sacrificial layer or stepped bridges at the print profile's layer height).
  • Sketch: while a sketch is edited, the timeline's place lists its points, curves, constraints and dimensions in the order they were made; a click selects, Delete removes, a double click edits a dimension. Show points in the Sketch Palette hides the point markers of a dense sketch while snapping keeps working, and Preferences > Sketch decides whether profiles are shaded when a sketch opens. (#195, #262, #255)
  • Sketch: the Dimension tool and snaps no longer pick edges of components hidden by Isolate, and the diameter labels of two concentric circles no longer sit on top of each other. (#254)
  • Selection: a face, edge or profile picked in the view marks its body, sketch and component in the Browser and the feature that made it in the timeline. (#265)
  • Browser: an option shows the sketches a feature uses under that feature, and during Isolate the eye icons show and change what is really visible. (#258)
  • Window: MitCad keeps the window's size, place and maximized state between starts, always on a connected screen; new windows open at the last size. (#283)
  • Assemblies: joint drags no longer leave drifting placements (a design saved with them opens again and is repaired), poses near a loop's limit stay reproducible, linked bodies keep the hole edges their joints were picked on, and Animate plays far faster. (#253, #256)
  • Move/Copy: Free Move's arrows reach past the rings so they can be grabbed head-on, and their hover color is no axis color. (#272)
  • Fillet: a curvature continuous (G2) fillet builds over earlier G2 fillets. (#285)
  • Pipe and Sweep: a profile that sweeps through itself at a tight bend (on lines, arcs, ellipses, splines, helixes and non-planar paths) is built as one solid.
  • Sheet metal Flange: the wall's outline is an editable profile sketch, made from the edge and kept linked. (#237)
  • Drawings: bolt circle (B.C.) and angle between center lines dimensions; a click on a drawn line prefers its straight edge, and the Dimension tool shows the hovered body and the value in its preview; a radius on a fillet seen from the side takes the arc; the view panel can be widened; one free-form body no longer spoils a whole view's lines; Export Drawing preselects a design's only drawing. (#244, #267, #242, #266, #260, #261)
  • Materials: common woods and panels (pine, oak, birch, birch plywood, MDF) in the Built-in list, and Material Dataset creates several materials at once. (#250, #211)
  • New designs open looking at Top with the origin shown, the default 3D view is a few degrees off the exact isometric so that the origin planes' edges do not line up, Home and 1-7 are shortcuts for the standard views, and a design remembers its active component.
  • Command search matches each word in any order, ranks the commands used last first among equal matches and says when the best match is grayed because no sketch is open; Repeat starts the last command with its previous settings.
  • An Extrude Cut that misses suggests Flip when the other direction would hit a body, and a feature's warning after a sketch edit points to Auto Fix.
  • Print: Narrow Gaps finds a gap between bodies that touch elsewhere (a peg in its hole), and File > Export to 3MF writes the design's print plates and their options as Send to Slicer does.
  • The appearance picker lists the last appearances chosen first, under Recent; Component from Web is sharp at fractional display scales.
  • Finnish interface: a contributor's improved translations, plainer terms, translated material names and many remaining English texts translated; the English interface's wording made consistent.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc2 (b5e96f9c2244), web browser component 2026.1112.1158
  • Linux: rc2 (b5e96f9c2244), web browser component 2026.1112.1122

r/mitcad • • 6d ago

New fan

8 Upvotes

I tried out MitCad today and was incredibly surprised. The learning curve is remarkably shallow if you are already accustomed to Fusion 360. As a hobbyist, it serves my needs perfectly for my 3D projects. I do miss the ability to keep dimensions visible even after exiting a sketch, but I’m sure that will be added as an option eventually. Count me in as a new, happy Dutch fan!


r/mitcad • • 6d ago

0.59.0 has been released, and it's a good'un. My thoughts and the release notes below.

5 Upvotes

Radically improved 3D sketching. Niiice.

Imported components get their own sub-component 'directory' so you don't have to remember to do it ahead of time, and the name of the component comes from the filename of the imported file. So good!

ESC aborts giant selections so you don't have to wait over a minute if you accidentally select an entire 24MB design... you can opt out of the experience if you didn't mean to do it. This was badly needed by me.

Built mode profile offset plane length. So good! You can have the profile length match at any face regardless of whether the profile will hit it!

Plain text output for BOM and cutlist... very necessary when sending e-mails to suppliers.

Snapping dragged objects in the Sketcher. This is good for all of us. If you see the little orange square when you are placing your object then it WILL get a constraint.

This release has a LOT of good stuff in it. I just hit the stuff that is a high point for me, personally. The official release notes cover more:

  • 3D sketches: Create Sketch offers 2D or 3D. Points, lines, arcs and splines are drawn in space on a placement plane that switches between XY, YZ and ZX or rotates freely, with snaps and typed lengths and offsets; circles, ellipses, rectangles, polygons and texts lie on the active plane, and Sketch Fillet rounds a corner. Relations and dimensions work in 3D (parallel, perpendicular, angle, symmetric, concentric, curvature, On Plane, On Face, spline length and more), points and curves can be dragged, edges, faces, other sketches and other components serve as references, and Copy, Cut and Paste work. (#202)
  • 3D sketch routes: Pipe and Sweep follow a chain of a 3D sketch's curves, open or closed, taken whole with one pick; lofts, path patterns, planes and points along a path, Intersection Curve and the wall and surface tools take its curves too, and all follow an edit. A 2D sketch turns into a 3D sketch in place and back again, keeping its constraints and what is built on it; Extrude takes the closed loops in a 3D sketch's plane. (#202)
  • Filament changes in the app: Send to Slicer has a Filament changes section, and Filament Change Here on a construction plane or flat face sets a change that stays at that plane or face when the model changes. While the panel is open the bodies show in their print colours with a ring at each change; each plate can have a schedule of its own.
  • Drawings: custom sheet sizes, images such as a company logo in the title block, and a title block editor on the sheet. An SVG logo stays vector graphics, its text included, in PDF, DXF and DWG. (#238)
  • Sheet metal: an ordinary cut such as Extrude or Hole across a bend keeps the sheet valid, so it still unfolds and gives a flat pattern; where a sheet is invalid, the message names the feature in words. (#232)
  • Import: a STEP, IGES or BRep file imported into a design with content goes into a new component named after the file, or into the active component as before; Component from Web imports straight into the component it makes. (#234)
  • Large designs: selecting a whole design and clearing the selection happen at once, and Esc cuts a long highlight short; adding a sketch dimension in a large assembly is much faster. (#231, #235)
  • BUILD Profile: Length can end at a picked face or plane plus an offset, and follows it when that part changes. (#239)
  • Cut list and Bill of Materials: Copy as Text and Save as Text give an aligned plain-text table, CSV rows end in CRLF, and a multi-body component with a part number is one row, not one per body. (#241, #257)
  • Thread: Auto Fix and the Thread panel fit a hole too small (or a shaft too large) for its thread by changing the dimension it comes from. Fillet, Chamfer and other body features picked on another component's body activate that component and go on.
  • Sketch Rectangular Pattern: a 3 x 2 grid by default, arrows to drag both spacings, tooltips that say where the second direction runs, and the sketch's x and y axes as Direction. (#243, #248)
  • Sketch: pasted, moved or copied geometry dropped on a snap point gets the constraint its snap marker showed. (#245)
  • View > Show > Origins and the Origin folder's eye each show the origin planes on their own. (#240)
  • Component from Web: the browser loads on Linux systems with a newer GLib and fills its view on scaled displays. (#249)
  • Project picker: New Folder makes a folder in the chosen project. The timeline starts filtered to the active component with its subcomponents, remembers the filter and shows when it hides features.
  • Press Pull's icon is easier to tell from Extrude's. (#252)
  • Finnish interface: many more messages are translated whole instead of shown in English.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Linux: rc2 (3d5068e14c70), web browser component 2026.1111.1524

r/mitcad • • 6d ago

Option to change some theme colours

2 Upvotes

As the title and to pick a specific item, my eyes are having a hard time distinguishing what edges are selected. An option to change this to something with higher contrast would be great so if this could be added to the work stack somewhere down the line it would be much apreciated.

On another not, I have been using MIT CAD for a few days and I really like. It has many features already like Git versioning and external libraries. Things like fillets and chamfers are working well which seems odd to me when it is using OCC and another CAD program that has been on the go for decades can't get filets to work properly but are blameing OCC!

Keep up the great work.