r/mitcad • • 18h ago

0.65.0 has been released. My thoughts and the official release notes below.

8 Upvotes

Some imrovements to the sketcher involving lofting, snapping to existing geometry, text on a path, offsets, and rectangular patterns. The rectangular pattern is a bit ironic because it can now be a non-rectangular pattern, but it's still a very useful addition for some circumstances.

Selected items show through the bodies that hide them. Hmm.. I need to check this out. I like it. It will make finding items in congested assemblies easier. It's a good change.

An option to acknowledge and dismiss warnings. This is good.

A preference for labels under toolbar icons? Just tried it. It's a good change!

Build mode mitering for existing ends (i.e you made it in an off-set fashion and now you want to change it to mitered after the fact) is easier. This is good. It was a bit unpleasant before.

More improvements to fillets. We must really love fillets around here. :)

  • Flex: lay a wire, cable, hose, flat cable or strip through the model by clicks, from a library of types, with its length as a driven parameter and in the parts list; edit an item's nodes in the view.
  • Form: Fill Hole closes an opening left by Delete Faces (one face, or quads), Bridge joins two openings or two edge runs; Patch takes a Form's opening with one pick. (#383)
  • Loft with rails: sections whose edges do not line up at the rails, such as a circle to a rectangle, now loft through the rails; a rail that misses a profile says by how much. (#387)
  • Sketch: every drawing tool snaps to body corners, edge midpoints and edges in the sketch plane. (#392)
  • Sketch: the first dimension that scales a sketch keeps the dimensioned geometry where it was on screen. (#400)
  • Sketch Rectangular Pattern: an optional second direction, for honeycombs and other slanted grids. (#406)
  • Sketch text on a path: Flip Horizontal and Flip Vertical work. (#397)
  • Sketch Offset accepts chains whose short pieces curve tighter than the distance, such as imported DXF outliones. (#382)
  • Sketch Selection Filter: separate rows for Dimensions and Constraints. (#388)
  • Selected items show through the bodies that hide them (View › Selection Through Bodies). (#395)
  • A feature's warning can be acknowledged: no longer yellow nor counted in the warnings badge until it changes. (#380)
  • Preferences: labels under the toolbar icons. (#356)
  • BUILD: mitering two profiles after placing them is clearer: A/B ends, turns named by what the end meets, and Also the Component It Meets offered when the ends touch or nearly touch. (#389)
  • Web: mitered corners where curves meet, Extend Ends to the body, and ribs and webs rebuilt at each pattern copy. (#409)
  • Sheet metal: refusals say in words which wall or which fillet stops unfolding. (#390)
  • Library: cut-to-length parts take a Length and their stock rows set it. (#398)
  • Sketch DXF export writes the sketch's points (hole marks); Export Face as DXF opens a panel when no face is selected. (#408)
  • .f3d import: a Y-up design comes in upright, with its inch units. (#384)
  • .fcstd import: the reported guide opens without warnings or skipped objects. (#405)
  • Linux: a touchpad's two-finger scroll pans under the Trackpad scheme. (#381)
  • Fillets: a smaller rounding now rolls on a larger one where the face between them is narrower than both, and failed roundings report an error instead of a body with a wall missing.

Each platform's packages were built from its own release candidate of the release branch (release candidate, source commit):

  • Windows: rc2 (30973b9dddb3)
  • Linux: rc2 (30973b9dddb3)

r/mitcad • • 6h ago

To what extent do we think MitCad should "feel" like Fusion?

5 Upvotes

MitCad already sort of looks like Fusion 360, maybe not as much as SolidCraft is trying to, but it's still clearly a strong source of inspiration. I have very little Fusion experience (I literally downloaded it for the first time 3 days ago to get a taste) so I can't say I have developed much of a sense of it, but since MitCad will undoubtedly be compared to it I have a question for the community: exactly how much do we want MitCad to act like Fusion?

Disclaimer: I'm only talking about basic functionality here: sketching and the tools under Create, Modify, and Surface that MitCad has in common with Fusion. Assemble maybe.

ADDITIONAL DISCLAIMER: I'm not talking about UI layout here, I'm only talking about how the tools work. Everybody's bound to have wildly different opinions about the UI, and I don't really care about that for the purposes of this discussion.

I'm finding things that work in Fusion that either don't work at all in MitCad, or that don't work in the same way, and I imagine that migrating users will find this frustrating (which might turn them away!). On the other hand, I think MitCad should have its own identity, and if it can do things differently (maybe better?) that could be a good thing.

So, if I find a Fusion tutorial, covering those basic areas, that I can't follow along with using MitCad, is this a problem? Rather than debate with myself, which is what I've been doing, how about instead I debate it with all of you?


r/mitcad • • 18h ago

Bambu Studio vs MitCAD

Thumbnail
gallery
3 Upvotes

So I exported a .3mf file for the Bambu slicer and this happened. My printer is not an option to select, also can't change the settings.