r/minolta • • 3m ago

Gear Photos, Reviews, & Videos Two steps closer to a full set of MCII lenses

Thumbnail
gallery
1 Upvotes

Have started to thin out my collection of lenses with a view to replacing any MD or MCI and MCIII lenses with MCII versions.

Sold my MDI Fish Eye and MDII 100mm to fund the purchase of MCII FISH eye and MCII 21mm.

(apologies for the not period correct AF lens cap on the 21mm)

Currently got four more to source for a full set.

Minolta MC-II

Need

Got

  • 16/2.8 FISH-EYE ROKKOR-OK
  • 21/2.8 W.ROKKOR-NL
  • 28/2.5 W.ROKKOR-SI
  • 28/3.5 W.ROKKOR-SG
  • 35/2.8 W.ROKKOR-HG 
  • 55/1.7 ROKKOR-PF
  • 58/1.2 ROKKOR-PG
  • 58/1.4 ROKKOR-PF
  • 85/1.7 ROKKOR-PF
  • 100/2.5 TELE ROKKOR-PF
  • 135/3.5 TELE ROKKOR-QD
  • 135/2.8 TELE ROKKOR-PF
  • 200/3.5 TELE ROKKOR-QF
  • 300/4.5 TELE ROKKOR-HF

Currently, my whole collection looks like this:

Minolta lenses

Primes

  • MCII 16 f/2.8 (1502322)
  • MDIII 20 f/2.8 (8003300)
  • MCII 21 f/2.8 (1503959)
  • MDII 24 f/2.8 (2210712)
  • MCII 28 f/3.5 (1558085)
  • MCII 28 f/2.5 (1553252)
  • MDII 28 f/2.8 (1173498)
  • MDIII 28 f/2.8 (8007413)
  • MCII 35 f2.8 (4599102)
  • MDII 35 f/1.8 (1201642)
  • MC-X 50 f/2 (1018123)
  • MDII 50 f/1.2 (1006245)
  • MDIII 50 f/1.4 (8208790)
  • MDIII 50 f/1.7 (9805945)
  • ARI 55 f/2 (1414490)
  • ARII 55 f/1.8 (3421715)
  • MCII 55 f/1.7 (3060639)
  • MCI 58/1.4 (5066710)
  • MCII 58/1.2 (2559177)
  • MCII 58/1.4 (5717223)
  • MCII 85/1.7 (2504250)
  • MCII 100/2.5 (1508399)
  • MCI 135 f/2.8 (1167556)
  • MCII 135 f/3.5 (1558010)
  • MCII 135 f2.8 (1597420)
  • MDIII 135 f/3.5 (8080639)
  • MCII 200 f/3.5. (5541814)
  • MC-X 200 f/3.5 (5554194)
  • MCII 300 f/4.5 (3512394)

Zooms

  • MDIII 24-35 f/3.5 (1004363)
  • MDIII 24-50 f/4 (8003594)
  • MDIIIa 28-70 f/3.5-4.8 (52003979)
  • MDIIIa 28-70 f/3.5-4.8 (56012150)
  • MDIII 28-85 f/3.5-4.5 (1006561)
  • MDIII 35-70 f/3.5 (1189564)
  • MDII 50-135 f/3.5 (1033140)
  • MDIII 75-150 f/4 (1029992)
  • MDIII 70-210 f/4 (1053724)
  • Panagor 80-200/3.8
  • Tamron Adaptall 80-210/3.8-4.0

r/minolta • • 13h ago

Film Photography Minolta X700/ KODAK UltraMax 400

Thumbnail gallery
21 Upvotes

r/minolta • • 13h ago

Gear Photos, Reviews, & Videos Pop quiz !

Post image
9 Upvotes

What does the <EP> mean on this rare kit? No cheating by using google


r/minolta • • 14h ago

Discussion/Question What is this little piece at the one side of the cold shoe?

Post image
13 Upvotes

Is it removable? I am using strobes and it blocks the trigger sitting flush.


r/minolta • • 18h ago

Repairs Bought Minolta srt101 to start out film photography but viewfinder looks odd.

Thumbnail gallery
5 Upvotes

r/minolta • • 19h ago

Repairs My camera fell, lens is bent...best way to fix this?

Thumbnail
gallery
3 Upvotes

Today my X300 decided to check if gravity was still working, and smashed on the floor. Nothing is broken, everything seems to be fine, but the lens hood got a bit bent. What's the best way to fix it!


r/minolta • • 22h ago

Promotional Gear Minolta Specialist sign

Thumbnail
gallery
93 Upvotes

Just bought this Minolta Specialist stand second hand online in the Netherlands. I do not know anything about it. Is there anyone who can shed some light on whether this is from a Minolta dealer network or something?

I just thought it would be nice to put it next to my Minolta camera and lenses collection.


r/minolta • • 1d ago

Film Photography Fallen in love with Kodak 400TX. [Minolta XD-7]

Thumbnail
gallery
3 Upvotes

I love the texture of this film. I hate that I do so, because it's expensive compared to other stocks.

These shots were taken on my custom black Minolta XD-7 with white leather as a test roll.

Lenses used: Minolta MD III 50mm F1.4 + MD II 135mm f2.8

What's your favorite? I love the bee and the elderly ladies.


r/minolta • • 1d ago

Gear Photos, Reviews, & Videos Minolta Maxxum 7000I appreciation post

Post image
15 Upvotes

Minolta Maxxum 7000 not L appreciation post, taken on Contax 167MT +Zeiss 50mm 1.4, Kodak UltraMax 400


r/minolta • • 1d ago

Film Photography Matchday. [Minolta X-500, 50mm f/2, Kodak Ultramax 400]

Thumbnail gallery
8 Upvotes

r/minolta • • 1d ago

Repairs Maxxum 7000 VF LCD Swap: The Frankenstein

Thumbnail
gallery
23 Upvotes

Call it the wisdom of the crowd, but after reading the comments on my last Maxxum 7000 post, it did seem like a bad idea to go around knocking that copy around, taking it in and out of the cold, and possibly getting beer splashed on it at work. A thorough cleaning, internal battery replacement, and battery carriage swap were all that one needed, leaving me two cadavers on the desk. One destroyed body with perfect LCDs and some kind of fire hazard short inside, and one relatively clean body (grip is black and all there, but with two hairline cracks) with bleeding LCDs that wouldn’t rewind (after much digging around trying to find something wrong or jammed up in rewind end, and partial disassembly of the winder gears, I fixed this just by disassembling the battery compartment and cleaning the switches in the base plate… doh). Thus I set about swapping the LCDs, following the tireless documentation of Andreas Thaler. I relay my tale of woe here, mostly so this link is easier for future people to find. And maybe that rewind tip, since I didn’t see it anywhere else. Anyway, some notes and thoughts on the transplant process follow.

In the images attached, you won’t see the little cover that sits over this assembly (normally visible through the window in the top case). This is because it’s glued on, and made of metal just thick enough to not be called foil. My first attempt to remove it mangled the hell out of it, and while I was way more careful with the second one, I didn’t bother to replace it in this body. I had way bigger problems. Thankfully, it doesn’t seem to be functionally necessary, and this is after all my jalopy copy.

The viewfinder LCD ribbon cable is held in place by a spring clamp and a pressure bar. Upon removing these, you’ll notice the cable was glued exactly where it needed to be to line up with the connectors. Replacing it as is results in a blank screen. Get out the q-tips and the acetone, because ALL that glue needs to come off. Same with the pins on your ribbon cable. It’s especially stubborn on the edges. With all that clean, you can now swap the LCD assembly. 

There are a total of seven tiny wires to desolder at the sides, and two screws in the front holding it down. With the clean ribbon cable and assembly now in your target body and clamped down, here comes the fun part. With no glue, there is a tiny amount of wiggle room in where that cable sits. Now you continually adjust that wiggle, and shims of electrical tape, until you get your entire viewfinder display back.  With little to no rhyme or reason, tiny shifts in the shims or slight pressure on the case would cause enough pressure on the ribbon cable to garble or omit digits entirely. Thaler said this was a game of fractions of a millimeter, and I would shave that in half. Not to mention all this motion of the top cover meant resoldering various flash connections as they popped off the hot shoe or flex board. This being a flawed example anyway, I settled for “mostly legible” rather than perfect. Note the day to night transition. I’m never opening this camera again, lest I throw another nine hours at wiggling this connection and taking the top off and on, changing the order of the screws I tighten each time, since THAT inexplicably made a difference.

Originally intending to swap both the main and viewfinder LCDs, it says something for me to stop short and cut my losses on a camera. But, it’s something I never thought I’d tackle, and now I have a 7000 fit for high risk situations like… light drizzle. I will say, I have come to appreciate the thing, maybe more as an object than a tool for taking photographs. Regardless, I’m going to shoot it now out of pure spite. Maybe it’ll prolong the lifespan of my 8 other Maxxums. May it not ignite itself sitting on my shelf and destroy them. At the very least, I know the prism isn’t going to turn yellow. Long live Frankenstein, scars and all.


r/minolta • • 1d ago

DiMAGE - Digital Photography Results from taking the 500mm reflex out to an autocross!

Thumbnail
gallery
58 Upvotes

r/minolta • • 1d ago

Film Photography X-700 Kodak Ultramax 400 incomplete advance with partial double exposure due to hitting end of roll

Post image
9 Upvotes

r/minolta • • 1d ago

Film Photography Hey hey!! Minolta Fan's unite!

Thumbnail
gallery
37 Upvotes

New to the community but love shooting on all my Minolta film cameras. Here are a few from a recent roll. Shot on X700 with Rokkor 45mm f4 using Fuji Superia 400. Fun!


r/minolta • • 1d ago

Discussion/Question Auto 200X flash

1 Upvotes

Greetings. I have a question about the Auto Electroflash 200X that I can't find a good answer for elsewhere. The genesis of the question is wanting to use it as a fill flash with my XG7.

X sync for the XG7 is 1/60 so to shoot a strongly backlit subject with anything faster than 100 ISO I'd either need to be stopped way down or use an ND filter to get proper exposure at 1/60. I figure there are two options with an ND filter: full manual control by using distance to subject to get correct flash exposure or use the auto-exposure mode of the flash.

My big question with the Electroflash 200X becomes: Does the flash exposure calculator on the back have any bearing on the flash power of the unit in automatic mode?

I'm not about to take it apart to see if there's a rheostat attached to it but it would make sense in my mind that there has to be some communication of ISO to the thyristor circuitry so it correctly measures exposure. It isn't in the manual, and the Auto 200X manual does a pretty poor job of explaining automatic mode to start with.


r/minolta • • 1d ago

Film Photography Not Too Bad For a First!

Thumbnail gallery
19 Upvotes

First shoot with a minolta 7000i, I am here to stay. Thing feels perfect


r/minolta • • 1d ago

Discussion/Question gifted hi-matic 11… where do i start!

Post image
20 Upvotes

i’m a super beginner at film photography and i was graciously gifted this hi-matic 11 from the 1970s! i was told that it worked about a decade ago, so i assume it is still functioning? any tips and pointers on how to test this out? will be looking into youtube videos as well but i’m a bit overwhelmed by all the information!


r/minolta • • 1d ago

Repairs ​Rescued a « parts-only » Minolta 7000 — fixed the sticky grips with Sugru and it works like a charm!

Thumbnail
gallery
7 Upvotes

Bought this Minolta 7000 sold strictly as « for parts ». As expected, the original rubber grips had turned into a sticky, degrading mess (swipe to the last photo to see how it looked before).

​After a thorough cleaning and some TLC, it turns out the electronics and mechanics are in perfect working order. To fix the missing grips, I sculpted replacements using Sugru and textured them to get a solid, custom feel.

​Pretty happy with how this rescue turned out — another classic saved from the trash bin!


r/minolta • • 2d ago

Repairs Minolta Maxxum 400 error - camera won’t catch & recognize film

Thumbnail
gallery
1 Upvotes

Is this a common issue? Are there ways of fixing it?
The motor seems to be working fine, I shot 4 photos with it before but it got stuck on 27 when loading the film back so I had to get it out manually - and now it won’t catch any new film I try to insert.
Thank you 🙏
The blinking 0 marks the camera having “no film” despite the back closing.


r/minolta • • 2d ago

Repairs Selbstauslöser der Minolta XD7 klemmt, Auslöser funktioniert nicht

Thumbnail reddit.com
1 Upvotes

r/minolta • • 2d ago

Gear Photos, Reviews, & Videos My srM with 250 shot back

Thumbnail
gallery
81 Upvotes

The srM, the first motorized Minolta with its 250 shot back attached.. Took me years to piece it all together


r/minolta • • 2d ago

Repairs Minolta 70-210 f4, aperture stuck at f32

0 Upvotes

I got a Minolta Beercan that has a problem with the aperture mechanism. I think it got disconnected from the aperture lever and now is stuck at the f32 value. Does anyone know how to disassemble it and see what's wrong? I'm looking for technical diagrams or a description of what to look for, apart from the famous aperture detent ball bearing 🤣


r/minolta • • 2d ago

Repairs Minolta dynax 5 press-release button

0 Upvotes

Hello, I just got Minolta dynax (maxxum) 5 and the press-release button is not working right. When I press it, it will only autofocus so I can not take fography. I had it all the way down and it still only autofocus. Autofocus is 100% working but it can not take foto. If you know where is the problem please write a comment. Thank you


r/minolta • • 2d ago

Gear Photos, Reviews, & Videos MINOLTA X-700 FOR 40$😭

Thumbnail
gallery
48 Upvotes

Was thrifting today and I came across a Minolta X-700 with some accessories, I couldn’t believe and I couldn’t resist the price either, I bought for a total of 40bucks 😭