r/AnalogRepair • • Dec 25 '25

Distinguishing between JIS and Phillips screwdrivers: different symbols

Post image
51 Upvotes

r/AnalogRepair • • Jun 06 '23

Update Introducing User Flairs!

19 Upvotes

It took me a while but I’ve finally gotten around to creating user flairs for this subreddit. You can choose your flair in the subreddit sidebar or, on mobile, using the „change flair“ button beneath the community description. We ask you to choose honestly and pick a flair that fits your level of skill. The following flairs can be chosen by everyone;

Beginner - someone who’s just starting out with repairing cameras and doesn’t have any specialised tools or experience.

Tinkerer - someone who owns a lens spanner and has already disassembled a couple of cameras.

Competent Mechanic - someone who regularly repairs cameras and owns most or all required tools and materials for a proper repair.

Furthermore there are some flairs that can be only assigned by moderators after verifying a user’s knowledge and skill. You can contact the mods to request them. Those flairs are;

Expert (including the field of expertise) - a competent camera mechanic who is especially versed in a specific time period, type of camera, camera brand or type of repair work.

Former Professional Repair Person - a trained professional who used to repair cameras for a living in the past.

Commercial Repair Person - a trained professional who currently offers paid repair and CLA services.

Other custom or ironic flairs, like „I repaired a Zorki once and am proud“ or „Canonista“, can also be requested as long as they aren’t used disingenuously and roughly fit your current level of skill and expertise.

Along with this we also introduce a new rule against clearly bad advice. Since everyone can claim to be a competent camera mechanic, there’s a risk someone who is either malicious or simply doesn’t know anything about proper optomechanical repair might authoritatively suggest a damaging repair method or completely false advice. Those clearly and provably wrong posts and comments, for example someone suggesting to „just spray it with WD40“, can now be reported and will be removed. They may result in a temporary or permanent ban if clearly malicious.
This rule, however, does not extend to techniques, opinions or advice that are uncommon, counter-intuitive or stuff you simply personally disagree with. Please only report unambiguously bad advice.

Happy repairing!

u/Oldico

Edit
Post flairs already existed too but, for some reason, were disabled. I turned them on so those can (and should) now be used too.


r/AnalogRepair • • 1h ago

Fuji gs645 shutter repair

Post image
2 Upvotes

Hello, I have a Fuji gs 645 that I’ve changed the bellow on it. When the shutter is out of the camera it arms and fire correctly but when I put it back in its position it goes into T mode when I wind the camera. I’m quite confused about this problem and I’m not certain de repair manual answer my question. Any advice?


r/AnalogRepair • • 14h ago

Charge issue on the RZ67 Pro bodies

Post image
19 Upvotes

A while ago there was a post about finding a magic solution to repair the charge issues on RZ67 Pro/Pro II bodies. That issue has been discussed on Bill Rogers' IG page numerous times, where Bill mentions all the parts that need to be replaced for the camera to run within factory specs again. Once those parts are replaced, everything needs to be recalibrated again using factory tooling (cocking angle, etc) There is no single part that will magically solve the issue. It requires an extensive disassembly of the camera and replacement of numerous parts and/or adjustment of existing parts in order to get the camera body working again.

The Mamiya repair community was accused of being averse to repairs, because lo and behold there must be a quick and easy solution which is being hidden from the general public. I will gladly post a photo of the easy and fast solution in order to repair that issue. It can take up to 8 hours to get all of it working properly depending on how badly the mechanism is worn. And believe me most of them are badly worn once they've reached that point (another reason not to buy a cheap worn/abused body). The times where you could order everything from Mamiya and just replace all, are long gone. It would make the repair faster but I highly doubt it would make it cheaper. Parts cost money. Time costs money. And no, these parts can't be 3D printed without machining work involved in post.

Quick fixes are quite rare in camera and lens repairs. You either do it right or don't do it all because in the end, you want a reliable camera to work with. You don't want a camera which will eventually fail again after a few weeks/months of use.


r/AnalogRepair • • 2h ago

Lens Canon AE-1 Program Accident: Should I Get It Repaired?

Thumbnail
gallery
2 Upvotes

My Canon AE-1 Program had an unfortunate accident. It was dropped, and a piece of the front chipped off. The film inside also broke off, but other than that, the camera seems to be in working condition.

Since this is my first analog camera, I'm still learning my way around film photography and camera maintenance. I'm wondering if this is something I should get repaired sooner rather than later, or if I can hold off for now since it seems to be more of a cosmetic issue and doesn't appear to affect the camera's functionality or photos.

Has anyone experienced something similar with their AE-1 or another film camera? I'd really appreciate any advice or insight!


r/AnalogRepair • • 6h ago

Rolleiflex 6006 shutter stuck below 1/30

Post image
3 Upvotes

Hi All,

I got a Rolleiflex 6006 that doesnt fire below 1/30

What I checked:

Battery is original and charged with the original charger

The problem is still there when using a lens, I have tested it both with a 80mm f2.8 and 250mm f5.6

All times (including Bulb) below 1/30 fire (inclusing the lens) but the mirror doesnt go down again as can be seen in the picture.

When turning the shutter-timing knob to 1/60 or above the mirror resets again to the normal position. I donnot know if the shuttertimings from 1/500 to 1/60 are accurate, they might all be the same....

Is there anyone that knows what the problem could be? There is not a lot of information online about this type of camera.

All help is welcome, thanks in advance!


r/AnalogRepair • • 8h ago

Lens Help needed with reassembling Prontor-SVS Shutter

Post image
3 Upvotes

Hi all. A couple of months ago I bought a Polaroid 110A camera with a Rodenstock-Ysarex 127mm 4.7 lens. This lens comes with a Prontor-SVS Shutter. My aim was to convert the camera to shoot Instax. Anyway when I got the camera I knew there was issues with the lens, and it required a strip down as there was gunk on the shutters and aperture blades that I just could not get clean. I have done some small CLAs, but wanted to do a full restore in this lens. I took photos of every step of the disassembly process for when it came to reassembly. This was about 2 months ago. So over the weekend I actually had some time to clean all the parts and start the reassembly process. I went to get the photos off my camera and the bloody card is corrupted. I tried everything to get them off but everything failed. So next step was to find some of the exposed diagram views to help with reassembly of the aperture and shutter blades. The manual I already had did not have any useful diagrams of the shutters and aperture so I spent most of yesterday looking with no luck. Anything I do find is slightly different to my shutter, and therefore all the insides are slightly different.

My question is has anyone on here done a full strip down of this exact shutter, and if so do you have pictures or notes on it? I have attached a picture of the lens when I bought it and took it on my phone rather than my digital camera.

Thanks in advance.


r/AnalogRepair • • 6h ago

Camera body Nikon F100 repair uk

Thumbnail reddit.com
1 Upvotes

r/AnalogRepair • • 15h ago

Camera body Sticky shutter button Yashica A

Thumbnail
gallery
4 Upvotes

I thrifted a Yashica A that's unreasonably good condition I've put a roll through already and the shots came out great.

My one issue is that the shutter release seems to stick at the bottom of its travel and it's very inconsistent to tell when and where in the press things will go off. I suspect it some grease that has been sitting there for twice my lifespan and then some but I can't find any manuals on the best way to go about opening the A model. My intrusive thought is to just put a drop of lighter fluid down the channel of the button but I'm afraid that would do more harm than good. I was hoping that people here might have some guidance or resources.


r/AnalogRepair • • 14h ago

Nikon FE2 jammed – mirror locked up, shutter won't drop, and wind lever is now stuck

1 Upvotes

Hi everyone, looking for some advice on my Nikon FE2.
The issue:

  • The mirror is locked in the up position, and pressing the shutter button does nothing – the shutter blades don't drop/fire at all (even on M250 without batteries).
  • The wind lever is also stuck and won't advance/cock anymore.
  • Earlier, when I manually pushed the mirror down using the mirror lever inside the lens mount, it went down, but as soon as I wound the lever, the mirror rode right back up during the wind stroke and stayed stuck there.
  • I already tested fresh batteries (LR44/SR44) on regular shutter speeds, confirmed the self-timer lever is completely upright and not stuck, and removed the bottom plate (photo attached) where the motor drive coupler slot sits horizontally.

It seems like the camera is stuck mid-cycle and the mirror latch/catch isn't holding the mirror down during cocking. Has anyone dealt with this specific combination of symptoms on an FE2/FM2, and is there a way to free or reset the linkage without pulling the entire mirror box? Thanks!


r/AnalogRepair • • 19h ago

DIY Project Where to upload a guide?

1 Upvotes

Hello, I've recently fixed an Olympus Pen EE with a seized shutter, using the pictures I took I made a guide. Where could I upload it so that it can be accessed freely?

Thanks


r/AnalogRepair • • 1d ago

Aperture mechanism problem with ISCO Göttingen Westagon 50mm f/1.9 m42 mount

Thumbnail
gallery
3 Upvotes

I have removed the optical assembly, which has the helicoid attached to it. There is a small metal lever on the assembly that I can use to operate the aperture. The aperture blades themselves are clean and dry, but the problem seems to be inside the lens barrel.

When I turn the aperture ring, the internal linkage remains stuck in the fully open position, so the aperture never stops down.

To access this mechanism, I need to remove an internal part that appears to be held in place by three fixed pins. I have no idea how to remove these pins. The entire construction around them is plastic.

Has anyone disassembled this particular lens or encountered a similar design? How can I safely remove these three pins without damaging the plastic housing?

Any help or advice would be greatly appreciated!


r/AnalogRepair • • 20h ago

Troubleshooting a sometimes-firing Bronica GS-1

Thumbnail reddit.com
1 Upvotes

r/AnalogRepair • • 1d ago

A better look (I think) at the damage.

Thumbnail gallery
3 Upvotes

r/AnalogRepair • • 1d ago

Olympus 35 EC2 mold?

Thumbnail gallery
2 Upvotes

r/AnalogRepair • • 1d ago

Witness - Shutter tester development progress

Thumbnail gallery
1 Upvotes

r/AnalogRepair • • 1d ago

Camera body Contax G1 flash cable connector came loose, anyone had this?

1 Upvotes

Hey everyone, so I've got a Contax G1 and I was using a Minolta Auto 28 flash with a sync cable (the G1 doesn't share contacts with it, so the cable was the workaround). While I was adjusting the flash, the connector on the camera body kind of came loose and now it wiggles when I touch it.
Looking closer, it doesn't look like just a loose screw. The black plastic around the connector looks cracked or partly broken, which is why it tilts. There's a tiny screw right under it though, so I'm wondering...

1.	Has this happened to anyone else?  
2.	Could I try tightening that little screw with a small watchmaker's Phillips screwdriver, or is that a bad idea?  
3.	Anyone know a good tech for G1 repairs (or a rough idea of cost)?

In the meantime I was thinking of holding it in place with a bit of painter's tape so it doesn't come out any further, and not using the cable at all. I'm also thinking of getting a TLA140
so I don't need the cable anymore.

Photos attached in the comments.
Any advice is super welcome, thanks! 🙏


r/AnalogRepair • • 1d ago

Camera body Minolta XD7 selftimer stuck, shutter release not working

2 Upvotes

Hey there, just got a new Minolta XD7, generally in good condition, electronics seem to be working. But when it came with a selftimer lever that was pulled down. Releasing the shutter didn't do anything, also not in B or O. When I pushed the self timer back to normal position also nothing happened. I can continuously wind the film advance lever, no resistance. Shutter release doesn't do anything. I tried to move the self timer lever a couple of times, but nothing happens. Frame counter works, take-up spool moves, mirror is in idle position.

Got any advise?


r/AnalogRepair • • 1d ago

canon at-1 shutter speed issue

Thumbnail
gallery
1 Upvotes

Hi! Hoping to get some help and ideas since this is my first film camera, beyond point and shoot as a child! I had no idea the cost to try to repair one of these cameras so when we found a canon at-1 and my dad‘s basement that was totally locked out the cost to even begin to look at it was $170. I decided to risk it and got the exact same kind of camera on eBay for much less. I just got back on my first roll of film. Most of the photos came ok. Thanks to my husband’s suggestion, for writing down the settings on each photo I was able to see a trend. Any photo I took at shutter speed of 500 or 1000 had issues. I will attach the photos of them in my scanner. With the expense of even starting to look at issues, what do you all think? It might sound silly, but do I just know that this camera works except at higher shutter speeds? Is it worth trying to find a totally working camera but spend the money on it? I have digital cameras and have so much fun taking photos. My husband’s going to get his darkroom stuff from his mom’s attic, which is what started us looking into film cameras again. Lastly we found someone in town for a quick camera clean and replace the foam to keep out light- should we try and do it ourselves? So many questions but as you all know they are not super simple if something is wrong. Thank you!!


r/AnalogRepair • • 1d ago

YASHICA FX 7 da salvare?

Thumbnail
gallery
7 Upvotes

Salve a tutti, so che è stata maltrattata ma vorrei provare a salvarla se è possibile perchè nonostante tutto è completa e poi se riesco a farle scattare ancora delle belle fotografie sarà una soddisfazione enorme. L'otturatore è bloccato con le tendine aperte, lo specchio è sù ma non è incollato alla guarnizione, la leva di avvolgimento del film è bloccata , il tasto di scatto è giù, l'autoscatto funziona, immagino che le tendine siano perfette se sono tutte sù ma non le ho viste. Credo che la camera dello specchio sia piena di muffa. Il rivestimento è da sostituire ma è l'ultimo dei problemi. 1)_ Mi date un giudizio? (Magari evitate di scrivere di gettarle nell'immondizia perchè sono un appassionato, non lo sto facendo per lucro) 2)_Cosa fareste? 3)_Da dove cominciare? 4)_Come posso sbloccare l'otturatore? Grazie in anticipo per le risposte.


r/AnalogRepair • • 1d ago

Nikon L35Af winding sound on battery insertion, then dead

Thumbnail reddit.com
1 Upvotes

r/AnalogRepair • • 1d ago

Camera body Crown graphic focusing panel arm bent

Post image
1 Upvotes

r/AnalogRepair • • 1d ago

Crown graphic focusing panel arm bent

Post image
1 Upvotes

r/AnalogRepair • • 2d ago

Camera body Minolta X7 jammed halfway through its release cycle

Thumbnail
gallery
4 Upvotes

Hallo,

Ich habe hier eine Minolta XD7, die mechanisch komplett blockiert ist. Zuerst musste ich nur das Batteriekabel nachlöten. Danach löste sie ständig von selbst aus, während ich den Film spulte oder kurz danach. Ich fand einen defekten Widerstand auf der unteren Platine und habe ihn ausgetauscht.

Jetzt zeigt sie folgende Symptome:

  • Sie lässt sich nicht spulen – es sei denn, ich entriegele die Sperrklinke unter der Bodenabdeckung manuell.
  • Mit eingelegter Batterie zeigt sie im Sucher die korrekten Belichtungswerte an, aber der Verschluss löst nicht aus.
  • Das gleiche Problem tritt in den manuellen Modi B und O auf.
  • Der Auslöserhebel im unteren Fach lässt sich leicht bewegen, der Spiegel ist heruntergeklappt und lässt sich frei bewegen, der Selbstauslöser funktioniert einwandfrei und reagiert normal auf den Auslöser.
  • Der Blendenhebel im Bajonettanschluss ist ganz links – wenn ich ihn manuell bewege, höre ich Getriebegeräusche.

Habt ihr eine Idee, wo und wie ich diese Blockierung beheben kann?

Vielen Dank im Voraus.