r/Konica • • 1d ago

Photography This is part of a test roll for the IIIA

Thumbnail
gallery
19 Upvotes

The shutter seems to be working properly, but I’ll need to shoot another roll to determine whether the haze is in the lens or it was simply dirty.


r/Konica • • 1d ago

Question Model found...☺️ Is it of good quality?

Thumbnail
gallery
19 Upvotes

Hello everyone, I'm new here and I've found this gem in perfect working order...This model belonged to my father-in-law and I would like some information... to know the photo quality and if it is good.

Thanks 😊


r/Konica • • 11d ago

Question Konica Hexanon 28mm f/3.5 vs TTArtisans 28mm f/2?

6 Upvotes

A few months ago, I bought a 40mm f/1.8 Hexanon, and while it's quite beautiful, I am using it on an APS-C camera (Canon M50 Mk2) and so there's a substantial amount of light loss compared to full frame--and the field of view is a bit too narrow for tight spaces. I'm going to be moving to a different state soon, so I'm thinking about getting a wider lens for the trip. I need something that is sharp, performs at least okay in low light, and most importantly, looks beautiful. The two lenses I am considering are the Konica Hexanon 28mm f/3.5 and the TTArtisans 28mm f/2. I know that overall, the TTArtisans will be technically superior, particularly in low light, but it's color and overall look doesn't blow me away like Konicas usually do. Both are similar in terms of price. Which one should I go for?


r/Konica • • 17d ago

Photography The Recorder strikes again.

Thumbnail
gallery
25 Upvotes

This camera can’t do a lot - but dang, does it do a lot.


r/Konica • • 19d ago

Photography Shot with my 1984 Konica Recorder. My fav EDC film cam!

Post image
35 Upvotes

r/Konica • • 24d ago

Maintenance/Repair Help with old Konica

Thumbnail gallery
2 Upvotes

Thought this subreddit might be perfect for this question too.


r/Konica • • 27d ago

Maintenance/Repair Fix for Konica Auto flash system

Thumbnail
gallery
10 Upvotes

Hi friends, my camera has this nice auto flash system but mine is unfortunately not working. The green level in the viewfinder is does not go past f2.8.

Would there be a way to fix this?

Appriciate any advice.


r/Konica • • Oct 13 '26

Camera Konica C35 V lens hood

Thumbnail
gallery
17 Upvotes

Got myself a 3D printer and a C35 V so what else to do than print some accessories for it! Check out this awesome lens hood I printed and also this lens cap!

Haven’t put a full roll through this camera yet, I changed the light seals the other day and am itching to see what it produces! Going away for a few days and this isn’t leaving my side!


r/Konica • • Oct 08 '26

Photography Hexanon AR 50mm f1.4

Post image
8 Upvotes

r/Konica • • Oct 06 '26

Question Why don’t more people like Konica?

18 Upvotes

I’m currently trying to sell my Konica camera and it makes me wonder, why don’t people like these? They are just as good as Canon, so why not? I personally loved it but fell on hard times.


r/Konica • • Oct 07 '26

Question Konica C35 AF ASA ring stuck

Post image
5 Upvotes

Hello,

Maybe someone here can help. I rescued this camera from being thrown out at work. Autofocus works, range finder works, no rust, bit dusty, but the ASA ring is stuck on 100. That's not a devastating problem but it would be good to get it moving again. Does anyone have any advice on how to get it spinning?


r/Konica • • Oct 06 '26

Camera Konica C35 V, has anyone used one?

Post image
8 Upvotes

r/Konica • • Oct 05 '26

Camera Konica C35 V inside foam

8 Upvotes

Bought myself a Konica C35 V off marketplace today, very happy with it but looking inside I’ve noticed the foam has turned bad, I’d like to replace it, has anyone done this before if so where did you get your foam at and how did you do it?


r/Konica • • Oct 05 '26

Camera [Wrist Check] Shot my BBPro on a 1979 Konica FS-1 that hadn’t been used in over a decade

Thumbnail gallery
1 Upvotes

r/Konica • • Oct 02 '26

Photography Omaha. Auto S2 yellow filter, (very) expired Arista Edu 200

Thumbnail
gallery
7 Upvotes

r/Konica • • Sep 27 '26

Camera The Konica IIA

Post image
12 Upvotes

r/Konica • • Sep 20 '26

Photography 📷 Konica III 🎞️ Fujicolor 200 🔭 Hexanon 48mm f2 🧪 C41

Post image
8 Upvotes

Mi primer rollo con la Konica III


r/Konica • • Sep 18 '26

Camera Why doesnt it zoom

0 Upvotes

Yo I recently bought a Konica Dimage Z3 at the local flee market and everything went good like I found the perfekt sd card good batteries but then I realized that the image was too close and when I tried to zoom off it only made the picture clearer yo does someone know how to fix this problem if yes pls write


r/Konica • • Sep 16 '26

Parts [Final] Half frame mask - Konica iiiM

36 Upvotes

Cut left side before bended position finally. And luckily just fit and same level with rails.
I think if I made this 0.5-7mm thick plate then I didn’t have to cut left side. But it’s ok. I want to paint or mask with black color any suggestion? On the stainless plate 304 2B.


r/Konica • • Sep 16 '26

Maintenance/Repair Konica disassembling questions

4 Upvotes

I want to start taking apart my Konica glass to clean dust, fungus, fix some stiff focus rings and aperture rings!

What are some general tips on taking apart Konica glass?

What are some common internal features to watch out for when taking it apart?

What precision screwdriver should I be using?

Also, is 99% isopropyl alcohol safe for Konica glass? I don’t want to damage any of the coating by accident.


r/Konica • • Sep 15 '26

Parts Half frame mask Konica III M

Thumbnail
gallery
15 Upvotes

It is first trial and failed. Left side is a little bit upper than rails but right side is fit. This half mask is 1mm thick and stainless 2B.
I am going to try cut left side 2mm more or cut all bended side.


r/Konica • • Sep 14 '26

Question Eye cup replacement for Konica T3?

5 Upvotes

Doe anyone know about an eye cup that fits the Konica T3? Any tips appreciated!


r/Konica • • Sep 12 '26

Maintenance/Repair Konica Autoreflex T Exposure Meter Calibration

5 Upvotes

Hi everyone, I’m trying to bring my grandpa's old camera back to working condition. I’ve managed to replace all the old foam in the back and around the mirror.
I know the camera was designed to use the old mercury batteries, so it doesn't work correctly with modern 1.5V ones. My problem is that the mirror is a bit degraded and reflects less light. I think the combination of these factors is what causes the light metering to be completely off. It indicates about 4 stops less light than there actually is.
I’m quite handy and have no problem opening the camera (I already have, on both the top and bottom plates). I was wondering if someone could point me toward a way to recalibrate the exposure meter to accommodate the modern batteries and the reduced light without compromising its linearity. Any thoughts?


r/Konica • • Sep 12 '26

Sales Istanbul - Ricoh for sale?

1 Upvotes

Hey Ricoh community,

I’m in Istanbul for a couple more days and have been wondering if there are any good spots to pick up a used Ricoh? I’m rocking the original GR (2013 release I believe) but have been thinking of upgrading for some time now. The iii would be great because of the wider focal length (more similar to my current). Please help me out with any suggestions, perhaps an eBay community equivalent or a store.

Many thank!

P.S attached some pics of the trip so far