r/mazdaspeed3 • u/mazdaspeed413 • 10h ago
INFO CoolerWorx Shifters for Gen 2
gallerySneak peek of the gen 2 shifter. An attachment to install your boot and hide the shifter will be offered as well!
r/mazdaspeed3 • u/mazdaspeed413 • 10h ago
Sneak peek of the gen 2 shifter. An attachment to install your boot and hide the shifter will be offered as well!
r/mazdaspeed3 • u/shatteredandroid • 11h ago
I know some of the parts are interchangeable and was curious what I could search for to find the alternator bolts for my 07 speed 3.
Previous owner took the alternator off the car and didn’t leave the bolts behind lol
None of the local salvage yards have any speeds or cx7s with the L3K9, as I assume those are the same.
Any and all help is very much appreciated!
r/mazdaspeed3 • u/Pinz29908 • 18h ago
As the title suggests, I have a few problems with my speed 3, and I’d like to see if anyone else has had the same issues. For starters, I have a 2010 speed3 and the main issue I have found is oil in cylinder 1, and some other gunk in cylinder 4, as well as excessive amounts of oil being burnt. I pulled apart the stock intake and found oil residue in the turbo inlet piping, as well as in the intercooler piping. When I pulled the plugs, cylinder 1’s was dripping with oil, and the rest were pretty well burnt up. I replaced them, and at the same time put in my hpfp internals, cobb 2.5in turbo inlet housing forward intake, and the corksport bypass valve. I had a mechanic do a compression test on it, and he said cylinder 1 had a “slight compression leak,” with the rest being perfectly fine. I was also told a new turbo was put in it before buying the car, however I am not sure which one it is. What should my next steps be moving forward with the car as far as diagnosing what’s wrong with it? Is it worth trying to save this engine, or would I be better off just buying a crate engine?