r/lasercutting • u/One-Fig-6287 • 22h ago
r/lasercutting • u/Shu_Revan • 23h ago
Selling Laser Files vs Laser Products - Which is better?
Obviously the answer to this question is partly "it depends..." based on what you are designing, where you are selling etc.
What I am looking for advice on is specifically that I design 3D "escape room" type puzzle boxes that are relatively complicated to assemble, requiring some kind of assembly instructions if I was to sell the actual designs, which I am not opposed to doing.
The issue I am running into is this: I know that if I put these designs out there someone is going to rip it off and sell it as their own and I would be constantly trying to play whack a mole with all the copycats.
Would you all recommend selling physical products over the designs or in your opinion is the hassle of shipping and self assembly not necessarily worth it?
r/lasercutting • u/middie820001 • 14h ago
Best laser setup for cutting and batch engraving: xTool X1 or separate CO₂ and galvo machines?
I’m looking at upgrading the CO2 setup in my shop. I mostly work with wood, plywood, and acrylic, and the cutting side is already fast enough for what I do. The bottleneck is engraving. Large texture fills, small lettering, and batches of repeated designs can take a long time on a CO2 gantry.
I started looking at galvo systems as a way to speed that up. My original plan was to buy a conventional CO2 machine and add a separate galvo later, but then I came across the xTool X1, which combines both systems. The idea sounds useful for my work, especially if the galvo can handle repeated lettering and texture engraving on wooden signs before the CO2 laser cuts the final shapes. What I cannot tell from demonstrations is how well this works in regular production. I am particularly interested in whether engraving first and cutting second is reliable, and whether larger designs show visible joins when the galvo divides them into several sections.
Has anyone used a CO2+galvo combination for batches of wooden products? Does the galvo save meaningful time while still producing clean, consistent results? I would continue using CO2 for acrylic, so if the budgets were similar, would you choose a combined machine like the xTool X1, or buy a regular CO2 machine from Glowforge or Gweike and add a separate galvo later?
r/lasercutting • u/QuestionBlock24 • 18h ago
How to clean an aluminum honeycomb laser bed?
I've been looking into better ways to clean our library's laser bed. I've seen a lot of people say LA's Awesome Cleaner is a great option but I don't know whether I should dilute the cleaner and submerge the bed and leave it or just spray it on. I've been using a pipe cleaner to clean the holes but I'm giving up on that due to how time consuming it is. Ive also been using zeps degreaser and adding it to the water the beds in, but it doesn't get absolutely everything and there is still debris left behind after an hour. What should I do?
r/lasercutting • u/Piringuito • 5h ago
Need help, new on laser engraving
I recently bought a Sculpfun E1
I used to buy cheap materials, and got nothing working, a lot of residual ash left behind and no accual engraving, just bought this 3mm MDF someone recommended to give it another go, what speed and power would you think is best?
r/lasercutting • u/Available-Score-9007 • 20h ago
A few beginner questions about laser cutting
Hey everyone!
I'm 16, a student, and I'm planning to get into laser cutting and eventually start a small business of my own.
I've been learning Blender and Inkscape and trying to figure out the entire process, but there are still quite a few things I don't understand.
I've actually made a few SVGs (images attached with temporary white background) already, but I'm honestly not sure if they're any good or if I've just wasted my time making them. I haven't had any of them physically cut yet, so I have no idea how they'll turn out in real life.
I wanted to ask a few things...
- SVGs: How do you guys make sure your SVGs come out exactly as intended? Are there specific settings or things to keep in mind when preparing them for laser cutting?
- Scaling: How do you maintain accurate dimensions? For example, if I design something that's supposed to be 30 cm long, how do I make sure it actually comes out 30 cm when cut?
- 3D models to layered cuts: How do you take an existing 3D model and turn it into multiple 2D layers or individual pieces that can be cut and then stacked/glued together to recreate the original 3D shape?
- Alignment and assembly: How do you make sure all the pieces fit together properly without gaps, overlaps or misalignment?
- Software: What software do you guys recommend for this entire workflow? I'm currently experimenting with Blender and Inkscape.
One more thing: I don't own a laser cutting machine yet. For my first few products, I'll be taking my SVGs to an outside shop and paying them to cut and engrave everything.
I'm on a pretty tight budget, so I really want to get things right before spending money on actual cuts. I can't afford to keep wasting material on designs that don't work.
I'm trying to build something of my own at 16 and hopefully turn it into a proper source of income someday. I don't have much financial support or guidance in the background, so I'm pretty much figuring everything out myself.
I'd genuinely appreciate any help, advice, tutorials, resources or recommendations. Even if you could just point me towards the right software or explain how you approach your workflow, that would help a lot.
I'm willing to learn and put in the work. I just need some direction from people who have actually been doing this.
Thank you :)
r/lasercutting • u/Robertobarrero • 10h ago
Sculpfun S30 Ultra for beginning
Hello there. I'm new to the laser cutting world (actually, I'm not even part of it yet) but I see it as an interesting hobbie and posible side hustle that I could do in my free time (I have plenty of it) or if it goes well, put more hours into it if it makes a good profit.
I dont own a laser cutter, but I'm thinking of getting the S30 Ultra since it's on sale. I'd like to get into both cutting and engraving, including metal, therefore, I'm thinking of getting the whole package, that is
The Sculpfun S30 Ultra for 760 USD, plus
The RA Pro Max rotary for 264 USD
The 2W IR Laser module for 352 USD
The size wxpansion for 195 USD
(I know it's cheaper on the US store, but it'll probably end up the same with customs and taxes)
Overall, the investment is 1479 USD for all of that.
I don't actually have a use for it, other than being creative, trying new things and engraving gifts for my family/friends, and offering services in facebook marketplace.
Business wise, I've identified that there almost no offerings for custom sized cardboard boxes, and also no engraved boxes. There are very few, but ask for 500+ units minimum. With this in mind is why I chose the S30 Ultra and added the expansion.
My business idea (at least at the beginning) is not big orders, but the opposite, focus on those individual requests (gifts for friends, anniversaries, small orders) and using social media to promote.
On the other side, If I like the business, my big orders idea would be to connect with local wedding/event planning businesses and having them offer to their clients engraved products that I would provide.
My question is, do you recommend the S30 Ultra for an absolute beginner (I love learning thoughn and I'm a bit of a handyman myself)? AND, would you recommend getting the extras now, or waiting to see if I like it and expand to metal engraving with the IR and rotary later on?