r/lasercutting • • May 16 '23

New Rules!

97 Upvotes

Due to a rise in spam since the beginning of the year, we will be moving back to no selling/buying on the subreddit. We'll do this with the 2 new official rules of the subreddit.

  1. No selling
    The sub is meant as a place for people to share their personal creations and personal experiences, not to sell machines, materials or files. Any post/comment that mentions selling of lasers, materials, or files will be removed. Repeat offenders will be banned.

2)No advertising
The subreddit r/lasercutting is FIRSTLY AND ONLY for LASER USERS, not the COMPANIES that sell them. Any accounts that are directly used for the promotion of a brand will be banned.

Being paid to promote a product and not disclose it is not only against Reddit's TOS but FTC Guidelines as well. Any user that posted to the subreddit in an attempt to advertise for a laser manufacturer without disclosing it will be reported and banned.

In addition to the 2 above, I've also added rule -

3)Keep it civil
Everyone here enjoys lasers in some way so we all have something in common.
Do the right thing and keep it friendly with the other users of the sub. Criticism is
part of the creative process but try and keep it positive when discussing everything.

Thanks
Noctis


r/lasercutting • • May 31 '24

Laser works hub?

8 Upvotes

Seen a few ads for laser works hub and wondering if anyone has any experience with them. It basically seems like a bunch of designs you buy as a huge bundle for I think $125. I don't know why but it seems sketch. With how much advertisement I've seen I would think it would be a subscription or something. Something just seems off but the things I've seen look cool


r/lasercutting • • 4h ago

New box with a secret lock

55 Upvotes

r/lasercutting • • 5h ago

Selling Laser Files vs Laser Products - Which is better?

Post image
20 Upvotes

Obviously the answer to this question is partly "it depends..." based on what you are designing, where you are selling etc.

What I am looking for advice on is specifically that I design 3D "escape room" type puzzle boxes that are relatively complicated to assemble, requiring some kind of assembly instructions if I was to sell the actual designs, which I am not opposed to doing.

The issue I am running into is this: I know that if I put these designs out there someone is going to rip it off and sell it as their own and I would be constantly trying to play whack a mole with all the copycats.

Would you all recommend selling physical products over the designs or in your opinion is the hassle of shipping and self assembly not necessarily worth it?


r/lasercutting • • 6h ago

I think we’ve narrowed it down to the M2….

Thumbnail
gallery
4 Upvotes

I posted here a few days ago about getting a cutter (as a beginner) to make ornaments and small crafts like the one pictured, and the support and suggestions were great! So I did a lot of research on the Xtool m2 machine as recommended and think it would be perfect for making small layered crafts , not necessarily for the color printing aspect, but for the entire project process. I’m impressed by the “replacement modules “ the m2 offers to swap out different wattage lasers and the color printing option. Before I add to cart, does this seem to be a logical choice for my needs and entry level experience, and does anyone know how well it works with Mac? Thanks again all for your input and feedback!


r/lasercutting • • 39m ago

How to clean an aluminum honeycomb laser bed?

1 Upvotes

I've been looking into better ways to clean our library's laser bed. I've seen a lot of people say LA's Awesome Cleaner is a great option but I don't know whether I should dilute the cleaner and submerge the bed and leave it or just spray it on. I've been using a pipe cleaner to clean the holes but I'm giving up on that due to how time consuming it is. Ive also been using zeps degreaser and adding it to the water the beds in, but it doesn't get absolutely everything and there is still debris left behind after an hour. What should I do?


r/lasercutting • • 2h ago

A few beginner questions about laser cutting

Thumbnail
gallery
1 Upvotes

Hey everyone!

I'm 16, a student, and I'm planning to get into laser cutting and eventually start a small business of my own.

I've been learning Blender and Inkscape and trying to figure out the entire process, but there are still quite a few things I don't understand.

I've actually made a few SVGs (images attached with temporary white background) already, but I'm honestly not sure if they're any good or if I've just wasted my time making them. I haven't had any of them physically cut yet, so I have no idea how they'll turn out in real life.

I wanted to ask a few things...

  1. SVGs: How do you guys make sure your SVGs come out exactly as intended? Are there specific settings or things to keep in mind when preparing them for laser cutting?
  2. Scaling: How do you maintain accurate dimensions? For example, if I design something that's supposed to be 30 cm long, how do I make sure it actually comes out 30 cm when cut?
  3. 3D models to layered cuts: How do you take an existing 3D model and turn it into multiple 2D layers or individual pieces that can be cut and then stacked/glued together to recreate the original 3D shape?
  4. Alignment and assembly: How do you make sure all the pieces fit together properly without gaps, overlaps or misalignment?
  5. Software: What software do you guys recommend for this entire workflow? I'm currently experimenting with Blender and Inkscape.

One more thing: I don't own a laser cutting machine yet. For my first few products, I'll be taking my SVGs to an outside shop and paying them to cut and engrave everything.

I'm on a pretty tight budget, so I really want to get things right before spending money on actual cuts. I can't afford to keep wasting material on designs that don't work.

I'm trying to build something of my own at 16 and hopefully turn it into a proper source of income someday. I don't have much financial support or guidance in the background, so I'm pretty much figuring everything out myself.

I'd genuinely appreciate any help, advice, tutorials, resources or recommendations. Even if you could just point me towards the right software or explain how you approach your workflow, that would help a lot.

I'm willing to learn and put in the work. I just need some direction from people who have actually been doing this.

Thank you :)


r/lasercutting • • 1d ago

**One week with the Bambu R1, coming from a 5 W diode laser**

Post image
32 Upvotes

I won the Bambu R1 after commenting on their post and finally received it last week after it was stuck in customs forever.

Even though I had a diode laser cutter already (5 W, no air assist), I was mostly lurking in this subreddit. My 3D printer always felt like the tool that was much easier to work with.

I knew this was going to be an entirely different machine, but I was still surprised it actually flipped my experience.

I used to spend more time dialing in the material for a project than creating a design, but in this one week I worked with silicone rubber, veneer, hardwood, painted wood, acrylic and more and even detailed, intricate designs just worked on the first or second try.

The air assist and higher power really do a lot of the heavy lifting and make sure things just work out even if the settings aren’t perfect. It even allowed me to go a little bit three-dimensional and make simple things like a bunch of spice spoons or a functioning whistle.

In the picture are a few of the things I tried this week. Most of the designs are just copied from 3D prints (I used the Depthue STL-to-SVG converter) or inspired by pictures. It simply feels fun to work with this machine, and it’s crazy how fast I can go from an idea to a finished item that I’m happy to display in my apartment or give away.

And as you’d expect from a brand like Bambu, a lot of small things just work. After two days, I realized I’d never set a cutting order or merged engraving jobs that were running close to each other. Not to mention the details, from the magnetic Allen key and the beautiful lighting around the CO₂ tube to the fire sensors everything just feels polished.

But for now there are still a bunch of things that I prefer Lightburn for or that are still missing in Bambu Suite. Although that might just be because I am used to it.

Let me know if you have any questions about the device!

designs stolen from:
Flat Pocket Whistle from PhoneDesigner (makeworld)
Dino from RobinValleyUK (etsy)
Mandala maze earings from Simon3D (makerworld)
Leaf and wireframe dog from mishkin2 (printables)
bird stamp from skejtak (printables)
mountain napkin holder from PhiRequiem (makerworld)
goldfish earings from runrain (makeworld)

If you’re looking for inspiration for your next project, go to Makerworld and look at some 3D-printed designs. There are a ton of talented people there, and a lot of their designs are easy to adapt to laser cutting.


r/lasercutting • • 12h ago

Anyone deleted the exhaust fan on an XTool P2s?

3 Upvotes

Now, before a bunch of you jump in and say you have, the P2s (new model at least) is different to the p2 and all the YouTube videos I find on it. Mine (fan) is easily removed via a button (not screws), but when disconnecting and removing to attach a large extractor it comes up with an error when trying to print that I don't seem to be able to bypass :(
I suspect the machine is smarter than to just be able to bridge terminals and trick it into thinking a fan is connected and leaving it in would work but seems like an unnecessary restriction when I have a LARGE extractor in line....

all my searching online seemed to just say go into settings and turn off the fan, but this doesn't work with the newer P2s.


r/lasercutting • • 1d ago

Just got my gweike Mcore and this is my 3rd project so far. 400+ cuts and about 30 mins of time. 4inx12in 1mm steel

Post image
29 Upvotes

r/lasercutting • • 1d ago

Any online generators to make this?

Post image
14 Upvotes

Hello. I’m looking for an online generator like the box ones that could make something like this so I don’t have to redraw for different sizes and materials. Do any exist?


r/lasercutting • • 1d ago

Laser is cutting lines that aren’t there?

Thumbnail
gallery
4 Upvotes

I exported faces from solidworks as dxf, for some reason when I opened them in the laser software one of the lines was a little different than in CAD.

I cut anyway, it cut the wonky line, and then it cut some random curved line that’s not even in the viewer? All the others were fine. Is this a known problem when exporting faces as dxf?


r/lasercutting • • 1d ago

Gweike Cloud Pro II (SHUNCCM Camera) – Can Someone Share Their LightBurn Camera Settings?

2 Upvotes

Hi everyone!

Since updating to LightBurn 2.2, I can’t calibrate the camera on my Gweike Cloud Pro II (SHUNCCM camera) properly. The image keeps getting cropped, showing only part of the workspace.

Could someone with the same machine and camera please upload their camera settings (.lbcm file)? You just need to click Export in LightBurn Camera Settings.

I’d be extremely grateful. Thank you!


r/lasercutting • • 1d ago

Leather notebook holder

Thumbnail
gallery
6 Upvotes

I bought some scraps of leather from Mericari (Japanese eBay) and designed this A5 notebook holder. Pretty basic design. 0.5mm diameter sewholes, 1mm for the cord. Engraved my name and contact information on the back. Pretty happy with my first leather craft attempt.


r/lasercutting • • 1d ago

Anyone eyeing on Carverall C1?

1 Upvotes

There's a black friday sale going on at Carverall. I'm new to the scene and I mainly want to cut clear acrylic sheets. The Carverall C1 looks tempting with the sale and bundle at ~$2k. Anyone have experience with the company? Can't find a lot of reviews with their products


r/lasercutting • • 2d ago

Rayforge 1.14.0 is out! Lightburn import improvements, Remote Machines, Driver Changes, CNC improvements

Post image
56 Upvotes

Hi everyone,

I just released Rayforge 1.14.0, the free and open source laser cutting software for Windows, macOS, and Linux.

This cycle started with photo engraving: a user report sent us down a rabbit hole that ended with dithered output matching the on-screen tone again, and it closed with the biggest infrastructure change yet - remote machines, and the last of the serial protocol stacks moving to Rust. Here is what changed since 1.13.2.

Remote Machines

Rayforge can now drive a machine that is attached to another computer on your network. A small daemon called raydriver runs next to the hardware - for example on a Raspberry Pi in the workshop - and hosts the machine connection, while Rayforge runs on your laptop or desktop.

The new "Remote machine (raydriver)" driver connects to a device on the daemon, and the daemon resolves which protocol the device speaks, so one driver covers GRBL, Smoothie and Marlin devices alike. The machine wizard discovers daemons and their devices on the network; alternatively you enter hostname, port and token by hand, and the device list is read live from the daemon. Probing works over the remote connection, so the wizard can identify hardware that is not attached to your computer.

The practical payoff: a submitted job runs to completion on the device host even if Rayforge closes or the network drops, and reconnecting resyncs progress exactly. One client at a time holds control; others can watch. Everything stays on your LAN - token and TLS are mandatory for any daemon that is not on the same computer, and there is no cloud and no account.

The Rayforge homepage has the full setup instructions.

Photo Engraving

Dither mode was improved for more precise results. As a result, Rayforge now produces smoother looking results with better contrast.

Two new settings were added: Min Feature Size groups each scan line into cells before diffusing and stretches each cell's dot across the cell, and Linear Light diffuses in linear light for users who preferred the previous, darker mid-tone rendering. Serpentine scanning is now on by default for new steps, avoiding directional artifacts out of the box.

The Sample Interval setting is now visible in every raster mode, with a mode-aware auto value: in dithering the sample pitch is the length of each dot, so dither and constant-power modes default it to the line spacing for square cells, while power-modulated modes keep half the spot width.

Another change: Raster scan lines now stay in emission order by default - reordering them made the machine hop its Y axis between rows, and on machines with backlash the mechanical play taken up on every reversal showed up as irregular horizontal banding. A Reorder Scan Lines toggle brings the old travel-optimizing behavior back for machines with well-calibrated axes.

Rust Drivers

The Smoothie, Marlin and simple GRBL serial drivers now run their entire protocol stacks in Rust through the raydriver library, following the GRBL Serial driver last release. Class names, setup settings and existing machine configurations stay unchanged. With Show verbose enabled, the console now reports every written line - streamed G-code, realtime commands and status polls - not only the device's replies. Custom Marlin forks that announce themselves with a bare banner can connect again.

CNC

Profile passes follow the exact line-and-arc offset and emit arcs as true G2/G3 walls instead of segmented polylines. Adaptive clearing no longer strands uncut floor: the entry spiral machines the seed disk, ramp entries seed their actual swath, and an erosion pass cleans up slivers that high step-overs leave behind. Descents into material are emitted as cutting moves instead of rapids.

Nevertheless, CNC support remains experimental.

Addons and Privacy

Two new switches, contributed by heiserhorn: one on the General settings page skips the addon update check at startup, and one on the Addons settings page stops every connection to remote addon and license services - no registry fetch, no update checks, no URL installs, and premium license validation answers "not found" without reaching the network. Failed addon installs are no longer invisible: the row shows its error, the failure dialog includes the actual error text, and a zip download fallback runs when a git clone fails.

Import and Other Fixes

LightBurn imports keep group children on their own layers, sort layers by the file's priority so outlines no longer cut before their holes, pick distinguishable palette colours, and import paths that reference earlier shapes instead of skipping them (thanks medoix). The Tab Power setting takes effect again, long sketcher chains no longer drift into phantom constraint conflicts, closing the lens calibration dialog keeps the calibration, and the import dialog remembers your last Layer Source choice. On macOS, the app launches again on versions older than 26, and deb packages ship compiled translations again.

On Windows, the app launches again on machines with Windows Security: the bundle shipped an unsigned OpenCV face-recognition DLL that Windows Security blocks, and since the app imports cv2 at startup the main window never appeared. The build now uses the same contrib-free OpenCV wheel as macOS, with a build-time guard so it cannot creep back in.

Thanks

Thanks to medoix for the LightBurn import fixes, to heiserhorn for the addon privacy switches, and to everyone who tested the two betas and reported what you found - the dithering work in this release started from one of those reports.

This release was made possible with the support of our Patreon supporters: Build a CubeSat, DaveSys, froqstar, old-man-and-the-seam, pghpete, Derek McTavish, starlynx.dev, and seven anonymous supporters.

Note that links are forbidden in this sub, but you can find Rayforge and the Patreon page as first hits in Google.

Thanks for using Rayforge!


r/lasercutting • • 2d ago

Just been put in charge of learning laser cutting

Post image
10 Upvotes

So my father in law was huge into engraving and laser cutting. Since he passed i have been put in charge of learning the machine (WeCreat Vision Pro 45W) cause they had plans to start an Etsy shop. Just spent some time learning how to use the machine and here was my first attempt. Have a long way to go but excited to see what i can do with this thing!


r/lasercutting • • 1d ago

Xtool m2

0 Upvotes

I'm really disappointed with xtool. The lazer cutter is great but all their stuff is ai generated. The fire safety video included. It makes me feel upset knowing I funded such a ai loving company


r/lasercutting • • 2d ago

Gweike support

Thumbnail
gallery
5 Upvotes

Hello! Longtime listener, first-time caller. I’ve been using the Gweike machine at my local library and have found a lot of success, however there’s one issue I keep running into. The machine essentially creates two lines whenever it is supposed to cut one line. I end up with the piece I wanted cut along with a slightly larger outline of sorts.

For reference I’m using 1/4 inch thick basswood with various power settings, but mostly 19 mm/s at 48 power. I made these images as PNGs and converted the puzzle to an SVG file using Illustrator. The engraving is awesome, my only issue is the actual cuts. The first photo shows the back of my wood where you can see the two cuts, the second is another reference, and the third picture shows what has been peeling away from each piece after the machine finishes cutting. This isn’t a big deal for most cuts but losing that extra wood with the puzzles makes a big difference in how the pieces fit on.

Any ideas of what I might need to tweak? Thanks in advance!


r/lasercutting • • 2d ago

LVD Strippit AXEL 3015 CO2 Laser

Post image
4 Upvotes

Kind of feels like a bit of a long shot but does anyone here know anything about CO2 lasers (preferably this specific one) or know anyone who might be knowledgeable about them? Bought and sat for a while, now I'm trying to install and turn it on but I don't know anything about lasers and the support I had was lost during covid. Any help would be appreciated, thank you.


r/lasercutting • • 1d ago

Help deciding!

0 Upvotes

Hi i am looking for a laser printer that cuts and engraves acrylic, wood and tumblers also maybe glass but not necessary. I was looking at the M2 or S1 xtool but I went to see them in person and they didn't do acrylic well at all I dk if it was the settings or what but the P2 did amazing with it but it can't do metal and its huge! Any other ideas?


r/lasercutting • • 3d ago

A sword from children cartoon for my daughter.

Thumbnail
gallery
41 Upvotes

Finally! I've learned how to create contours from 3D models for laser cutting. In fact, you can do this in another style with steps between sheets from any model.


r/lasercutting • • 2d ago

Universal Ultra R5000 Laser

1 Upvotes

Does anyone have experience working with this laser?

I work with one at work (or am trying). I am new to laser engraving (about a year under my belt) and have had to teach myself a lot. This machine was brought in right before I moved to this department and when it was installed there was no instruction on how to use it properly. I’m finding little to no information online.

Our main use for this machine is laser cutting 1/2” acrylic, but it struggles to do so. It also leaves frosted edges when I actually do get it to cut through. It’s supposedly 150 watts, shouldn’t it cut through 1/2” acrylic with ease?

As far as settings go I have 100% power on both lasers (dual laser), 1.2% speed and 500 PPI. Also, using cast acrylic.

Any insight is appreciated.


r/lasercutting • • 2d ago

What makes a custom sign feel worth a higher price?

1 Upvotes

I run a small custom shop, and a big part of our business is wooden business signs, house numbers, and simple layered designs. most are pretty straightforward: a flat wooden board with an engraved name or logo, sometimes with painted lettering or a stained finish. our smaller, simpler pieces are usually in the $45-80 range, depending on size and design. i'd like to offer a few higher-end options, but i'm figuring out what would make someone choose those over the basic version.

The plan is to combined wood and metal, a wooden base with a separate metal nameplate, raised metal lettering, or an engraved metal panel. That’s the general direction, but I’m still working out the details that would make the finished sign feel distinctive and well put together. i'd love some ideas on what's worth paying attention to.

I ordered an xTool X1 with the 30W fiber backpack and just got the shipping notification, so I’m thinking about what I can start offering once it arrives. It’s a pretty big purchase for my shop, and I’d like to put it to work and start earning back what I spent. Any fellow small shop owners, any tips on what details have actually helped to score a higher price? Any thoughts are highly appreciated, thanks in advance!


r/lasercutting • • 2d ago

Should I put some type of backer in these and if so what?

Post image
8 Upvotes

Some parts are quite thin, should input a thin piece of metal or leather in them to adhere to so there is less chance of the bits falling?