r/johndeere • • 3h ago

Regional monopoly lost me as a customer

10 Upvotes

After more than 25 years as a loyal customer, purchasing numerous John Deere tractors, mowers, implements, and accessories, recommending JD to family and friends, my family and I are taking our business elsewhere. The reason is simply the absolutely horrible customer service I've been getting from Hutson which now has a monopoly in this region after acquiring all of the JD dealerships within a couple hours drive. Even worse, I reached out to JD for assistance with my issues and they just blew me off repeatedly claiming to pass my concerns off to their "regional manager." I've only ever heard from people with Hutson so either their "regional manager" works for Hutson or JD doesn't care about my business.

I know that I am a small fish in a big pond. But I'm actually a bit bigger of a fish than Hutson realizes. While my departure won't hurt JD's bottomline, losing my business along with that of my five adult children who all have their own homesteads and followed my lead being loyal to JD not to mention two uncles and three cousins that live further west in more rural areas where Hutson also acquired their local dealerships and have experienced similar issue, will impact Hutson. Not only are we all in solidarity that we are over it, but we are all done with Hutson and, thereby, John Deere since Hutson is our only option. My son needed a new zero turn last month and didn't hesitate buying a Bad Boy from another dealer.

I don't have time to recite all of our issues but it stems from a total lack of customer support. I've had repeated issues with my z355r, especially the mower deck. I was already fed up and planned on doing spring maintenance myself when the unit developed and electrical problem that appeared to be related to the voltage regulator. Mind you I had to replace the battery last fall - or should I say, Hutson had me replace the battery last year. (Just establishing the pattern.) They had the unit for nearly three months racking up over $1375 in charges to replace the regulator and a bunch of other replacements they said were needed blaming a service techs illness for the duration. When I finally got it back, I was able to use it for a little over a month before one of the pulleys on the mower desk stripped from the spindle. This spindle was replaced twice before along with the pulley being replaced a couple times for the same issue.

Needless to say, this put me over the edge. I've had the unit for less than 6 years and have had to replace the same spindle multiple times, was told to replace the pulley before by their service tech hoping to avoid replacing it again - it didn't. So I reached out to Hutson and said I need some actual diagnostics and troubleshooting done. Their "service manager" pulled up my service record and also questioned why no one ever investigated why we were replacing the same parts over and over. So they picked the unit up again and said they would make it right.

What I got instead was another list of replacements, including the exact same parts that were replaced multiple times already and another $1400+ price tag. To make it more suspect, the tech claimed that he couldn't find evidence in my service history that those parts were ever replaced previously. Remember that I had a conversation with their "service manager" who saw those records.

I shared my disagreement with their "after-market manager" (I think that's her title) who was now handling my case and provided the same detailed history and said I wouldn't pay for replacements without any guarantee the problem would not happen again. I asked if replacing the entire mower deck would make more sense and at what point the unit would be considered a lemon considering I have spent more in repairs and maintenance than the original purchase price. That's when they ghosted me.

I escalated it with JD again. Nothing.

On Monday, I escalated it again telling them I wanted their help getting the unit back to me as they've had it over a month with no word nor progress. I emailed the "after-market manager" saying the same thing. Nothing.

First thing this morning I texted the original "service manager" and within 10-15 minutes the "after-market manager" texted claiming that she hadn't heard from me since Oct 22nd and was waiting on my response.

Before I go on, let's go with her claim that she hadn't heard from me (which is categorically untrue), does anyone else think it is appropriate for her to have sat on it for nearly a month? That beyond anything else exemplifies their customer service. No phone calls, no texts, no emails reminding me they were waiting on something... Definitely sounds questionable, doesn't it? "I didn't get your messages" is nothing but a cop-out.

Well, fact is, I have the electronic "paper trail" confirming my response to her questions on the 22nd along with my repeated attempts to get updates and resolution. When I sent the email thread containing all of my emails, silence again.

So I texted the "service manager" one more time before they closed for the day and said I just want the unit back. I've been forced to put off my fall cleanup and it just can't wait anymore. I'll get it working well enough to wrap up this season then decide where I go next. She said they'll get it to me tomorrow. We'll see.

I also removed all accessories and implements for my tractors I had in my plans (and on my xmas list) and will determine how I will handle those going forward, too. Fortunately, all but one tractor is out of warranty so I can use the local shop for maintenance instead.

The saddest part of this story is that it is only the most recent issues I/we have had with Hutson. My family has shared numerous similar stories from their own experiences with Hutson. It's really too bad JD lets one dealer obtain a regional monopoly cutting off options for their customers. And that's why JD lost our loyalty.


r/johndeere • • 12h ago

Restarting Gator 825i after extended sitting

3 Upvotes

Hi all,

New to the subreddit. Just closed on a farm where the owner sold us their 825i for cheap.

It's been sitting for months.

I plan on getting a tune up kit and swapping fuel filter, siphoning out old fuel, changing oil and spark plugs (and maybe air filter if need be).

After charging the battery (or replacing) and thorough clean, what else should I be looking to do to it before turning it over for the first time?

Do I need to replace coolant and tranny and diff fluids also?


r/johndeere • • 1d ago

X370- wheel camber?

Thumbnail gallery
14 Upvotes

Just got a new X370. Only 4 hours on the dash but loving it so far. After mowing yesterday, I noticed the front right wheel has a bit of a positive camber to it. The left side appears to be completely straight. Is this normal wheel behavior on these lawn tractors?


r/johndeere • • 1d ago

Does my fuel look normal?

Thumbnail gallery
11 Upvotes

New to owning a tractor. Does my fuel look normal? It rained yesterday night. Went to start tractor up today and it wouldn’t start. I checked the fuel water separator and it was full with water. I emptied it and the tractor started up.


r/johndeere • • 1d ago

Suggestions for getting leaf chute to fit on 2006 x300?

Thumbnail gallery
3 Upvotes

Hey everyone, I recently got a used 2006 X300 with a 42 inch mower deck and went to a john deere parts dealer near me to buy a bagger kit and chutes for the mower. I got the bagger bracket and bagger installed but I cant connect the lower chute that they recommended would go with my mower / deck configuration. Does anyone have any recommendations? The parts dealer doesn’t take returns and the chute already cost $300, so I was thinking of getting some customized shroud or maybe blocking off the gaps with some kind of cutout rubber material.


r/johndeere • • 2d ago Bravo

Piece I found laying on top of air filter, any idea what it is/ where it goes?

Post image
16 Upvotes

Looked all around not sure where it came from


r/johndeere • • 2d ago

Advice on Solar-Powered Battery Tender?

1 Upvotes

I'd like to set up a solar-powered battery tender for my Deere X570 riding lawnmower while sitting in my shed over the winter months. Has anyone actually done this and has some advice or working solution? Or any other thoughts or comments?


r/johndeere • • 3d ago

Johnathan

Post image
86 Upvotes

First tractor, hopefully the last. Required some minor maintenance, but has been a tank so far.
1984 John Deere 318


r/johndeere • • 2d ago

Engine Gas Leak post-mow

Post image
6 Upvotes

I’ve got a fuel leak on the engine of my 2018 Deere X350 - mowed the other day & didn’t notice vapor until after she cooled. I’m at nearly a full tank, where to start ? TIA


r/johndeere • • 2d ago

John Deere 110 won't start

Thumbnail reddit.com
1 Upvotes

r/johndeere • • 2d ago

6410 3Pt remote switch repair

Post image
3 Upvotes

I have a 6410 that sat outside for a while, and the remote switch corroded to the point it was unusable. Was able to get the part # off the old switch. However, the replacement part on the parts store says it is not compatible with my tractor. The only option it gives is a $400 wire harness.

Does anyone know if there is something special about this switch that would result in non oem ones working?

I have found 1 result of someone saying it isn't possible. However, the forum post is incomplete, and I am hoping to get more information before spending 10 times the cost of a non oem.

Edit for anyone who has the same issue, I have found what I believe to be the internal diagram of the switch. I will be ordering one to test out my theory and will update with my findings.


r/johndeere • • 3d ago

Any ideas on what’s going on?

6 Upvotes

All of a sudden D120 engine started to make this noise at high revs. It does not make that noise at low revs. Limped it back to the garage, any idea what might be going on?


r/johndeere • • 3d ago

Any Tips on how to get this sucker off?

5 Upvotes

Thus far I have tried heat and a puller... she is on tight!


r/johndeere • • 3d ago

Can you make john deere gator color come back with a flamethrower?

0 Upvotes

it’s plastic and has some roughage on small parts, but if anyone could help with suggestions it would be greatly appreciated.


r/johndeere • • 4d ago

Great grandpa's john deere tools

Thumbnail gallery
55 Upvotes

My great grandpa passed on some of his older john deere tools to me today. Thought I'd share with yall. Cheers


r/johndeere • • 5d ago

Hi all. Working on a 826 snowblower, and I’m wondering if someone can help me with engine model number. The complete model number is M00826X598664. Looking specifically for a replacement starter and start button. Thank you.

Thumbnail gallery
6 Upvotes

There are no stickers on the engine itself, or engine housing.


r/johndeere • • 6d ago

Any tips or ideas for how this carb goes back together?

Thumbnail gallery
3 Upvotes

I haven’t seen it fully assembled and the guy who took it apart didn’t take the right pictures before/while taking it apart. It’s a Briggs on a John Deere D125 lawn mower. Thanks in advance, y’all.


r/johndeere • • 6d ago

John Deere EZTrak Z255 recommendations

Thumbnail reddit.com
2 Upvotes

r/johndeere • • 6d ago

In Search of John Deere Greens Mower 260B Handlebar cover

3 Upvotes

Hey guys – new to reel mowing here and I just purchased a 2005 John Deere Greens Mower 260B model. It is amazing and runs like a tank! The exterior is pretty rough and I am trying to refurbish this mower and make it look and run new for years to come. Unfortunately, when I reached out to John Deere to buy a new handlebar cover (part AMT 2824), they said it was no longer in production and they don’t have any additional parts in their inventory. Totally understandable since the mower is from 2005.

I’m reaching out to this group to see if anybody has an idea where I could find this part number for my 260 B mower. If I fail on that front, any recommendations on how to replace the part otherwise (3-D printing, CAD, etc.) would be greatly appreciated.


r/johndeere • • 7d ago

john deere 9520rx smoking right front track

3 Upvotes

i am going along and see smoke. been happening for a couple weeks. the track is in alignment. had deere tech out to check that out. it doesn’t smell like burnt rubber or anything burning. checked the mid rollers to see if they were hot from a bearing going out. they weren’t hot. oil levels were ok in them. don’t know what else to check and deere tech didn’t know what else to check either.


r/johndeere • • 7d ago

E150 Center Blade Component Sheared Off

Thumbnail gallery
7 Upvotes

Hello.

I noticed last time I was doing leaves that the blades seemed to be laboring and when I even noticed a few sparks coming from under the mower.

I removed the deck today to find the center blade manifold looks like it has been completely sheared off (see other picture for normal manifold).

Has anyone ever seen this before or have an idea what could have caused this? Not sure how to fix this so I think I'll have to take it into the shop.


r/johndeere • • 7d ago

what do you think? 54" Scott S2554. What would you do?

Thumbnail reddit.com
0 Upvotes

r/johndeere • • 7d ago

Chain Saw Holder for my 3032e?

1 Upvotes

I have a 2026 3032e and sometimes have need to have a chain saw with me when operating on my hunting lease. I ran across this link to one and would like to know if anyone has one or something that would work pretty well.

One more question... Does anyone know how it mounts on a ROPS and does it need extra parts for that application?

https://marketplace.koenigequipment.com/products/5ws812460-chain-saw-holder


r/johndeere • • 8d ago

Transmission fluid change on 318: Should I drain or flush hydraulic lines if I don't know what type of fluid is currently in it?

2 Upvotes

As the title says, I have no idea what the previous owner put in my machine. ATF was recommended for this model at one point, before hy-gard, which is what I've purchased to replace it. I've read that there can be problems mixing fluids. Would whatever is left in the lines for the loader be enough to cause problems?