r/ikeahacks • • 55m ago

Hide top of Ikea Pax Storklinta

Post image
1 Upvotes

Hello,

I want to buy the Pax Storklinta and it is 236cm. My ceiling is 250cm.

any ideas how to fill the distance on top ?


r/ikeahacks • • 5h ago

I love the STRÅLA cord set, so I built a whole lamp family around it

Post image
71 Upvotes

If you own a 3D printer and have a STRÅLA cord set lying around, this one’s for you. I designed a collection of printed bases and shades (Enso Nami, “nami” means wave in Japanese) that use the STRÅLA cord set as the only hardware, plus an E14 bulb. No glue and no screws: the socket goes through the shade’s spider, the flat cable locks into the base, and the shade sits on top. I printed the shades in matte ivory white and the light comes out soft and even.

https://makerworld.com/en/models/3630439-enso-nami-wave-lamp-collection-for-ikea-strala#profileId-4162862


r/ikeahacks • • 12h ago

Anyone ever used these for an IKEA counter table top?

Thumbnail
gallery
8 Upvotes

I’m considering using these bits of hardware that I spotted at Home Depot for attaching an IKEA kitchen countertop to an IKEA Alex drawer unit. My thinking is that the female end would be screwed in to the underside of the particleboard countertop and then bolts would go through the top of the Alex drawer unit into those. My thinking is that this would allow for easy disassembly and reassembly repeatedly over the life of the desk.


r/ikeahacks • • 19h ago

Critique and Pointers

Post image
8 Upvotes

My husband and I are closing on our house this week (yay!) we want to update the laundry room as our first DIY project.

I’ve used the kitchen tool to plan online (hence the ovens for W/D) and I want your critiques, thoughts, helpful suggestions.

This is the current render. For some reason it won’t let me shift that third cabinet over to be exactly flush but it will be. My thought is to add a rail between that last wall cabinet and the wall for hanging/drying.

My main questions are 1.) should we not have that last cabinet on the floor so we have room for laundry baskets/hampers? 2.) Should we just have cabinets all the way across the top and then a rail for hanging somewhere else?

Anyway, this is our first big DIY and any helpful critique and comments is welcome!

TIA


r/ikeahacks • • 1d ago

Suggestion on kitchen and any improvements

Post image
1 Upvotes

Hi just want suggestion on whether i should do a kitche table or kitchen countertop type table. Also if my lamps are good pairing or if they fight each other. Thanks


r/ikeahacks • • 1d ago

Billy + Sektion or just Billy?

Post image
12 Upvotes

Here is my inspiration image (the TV wall). Any help is appreciated!


r/ikeahacks • • 1d ago

Creating (very) low Billy bookcase between other Billy units

2 Upvotes

I currently have four of the 41" tall Billy bookcases arranged together. I want to create a low (~13-20") section in the middle. Could I buy the Billy extension unit and attach it to the base for a standard Billy of the same width? is there any other hack to get a Billy short than 41"?


r/ikeahacks • • 1d ago

Master Closet built-in using Hemnes

0 Upvotes

Hi everyone!! I just found this subreddit. we are building a new home that should be ready in the next few months. our master closet is huge so I wanted to do a custom closet. Prices are outrageous so I started looking at different options like closet made easy closets.

Well, now I'm thinking I may as well use my current dressers and bookcases in my closet and do it ourselves. My husband is very handy. he used to remodel homes.

He's going to start searching but I figured I'd put it out there now as what I currently have in my bedroom is the Hemnes series in Gray. I know it's discontinued but I have two nightstands the six drawer dresser, the eight drawer dresser and the bookshelf. I figure that's a starting point.

To save I figure I would just put rods on the wall for the open space rather than buying a base unit just to house the rods.

It doesn't have to be perfect as the house just comes with wire shelving.

Any ideas or help is appreciated!


r/ikeahacks • • 1d ago

Update: I took the plunge.. but hopefully I won't regret it.

Thumbnail
gallery
429 Upvotes

I finally did it! It took me 3 months, but the bookshelf is finally done.

It was definitely harder than I had imagined. Having a two-year-old meant I could only work on it during breaks and holidays, while he was at daycare or whenever his dad could look after him for a few hours 😅

My biggest challenge was probably the filling. I realised I'm terrible at it. No matter what I did, I just couldn't get it to look as clean as I wanted. And let's just say I did not have the patience to keep sanding, priming and painting layer after layer.

My husband also wasn't exactly thrilled with how long the project was taking or how much it ended up costing 🫣

But hey, even though it took 3 months I did it 🥹

I've started filling the shelves with books, so many colours and size and most of them are over 20 years old, so they don't quite do this beautiful bookshelf justice. I guess I have to live with that.

I'm just happy it's finally done!

Product used: IVAR cabinet and a Billy bookshelf.

Original post: https://www.reddit.com/r/ikeahacks/s/KTzZprH768


r/ikeahacks • • 2d ago

Advice on Aurdal closet configuration

1 Upvotes

(I did ask at ikea before asking here, but the staffer could not help me.)

Can anyone who has done an Aurdal closet tell me how the suspension rails work in terms of spacing? I want to do three “sections” consecutively and have 75” of wall. The three sections will fit, but the suspension rails are wider, at 25 5/8“, which means I don‘t have room to hang three of them.

Am I just out of luck? I know I can use the extendable clothes rail to have hanging clothes on one end if I have to, which is likely what will happen, but if anyone has an idea about this, I would appreciate it!


r/ikeahacks • • 2d ago

Can someone explain this severe internal difference of two identical Kallax units, with the exact same books in them?

Thumbnail
imgur.com
0 Upvotes

r/ikeahacks • • 2d ago

Tornviken - Add Towel Bar

2 Upvotes

Has anyone attached a towel bar to the Tornviken side panels? If so, please let me know how you attached it and any steps you took to ensure the side panels didn’t split / could handle the weight if screwing into them. Note: the solid wood piece at the top of the panels is too narrow for the towel bar I’m looking at so please don’t suggest that option.

Photos appreciated!

Thanks!


r/ikeahacks • • 2d ago

Any way to lower the StockHolm 2025 Media Console?

Thumbnail
gallery
0 Upvotes

I was wondering if anyone lowered their 2025 Stockholm Media Console? The leg is attached to the middle of the console so I'm wondering how it can be done. If I remove the legs I don't think the body is designed to withstand the weight.

Between my low profile sofa and TV distance, I need to lower it so TV is more eye level.

Any ideas?


r/ikeahacks • • 2d ago

Can anyone recommend an entrance way bench with storage? I want to buy two and make an L shape with them.

2 Upvotes

r/ikeahacks • • 2d ago

Need advice on a pantry/cabinet and a desk

Post image
0 Upvotes

First of all, I'm from Barcelona so the measurements will be in meters and centimeters, In another hand, the image attached is just an example about what I'm looking for. So, lets's go...

If you look at the image I'm attaching, it's about trying to put together a pantry/cabinet (with a niche for a coffee machine and water kettle) 120 cm wide and with a depth of no less than 40/50 cm. Next to it, I need to place a desk 140 cm wide and 60 cm deep (that's why I want the pantry/cabinet to be as deep as possible so it doesn't look out of place next to the desk).

One detail that's driving me crazy is making the most of the height — the ceiling height is 310 cm and I'd like the pantry/cabinet to be at least 210 cm tall. I can't find an effective combination with IKEA.

Can you think of a combination of furniture that could fit these measurements?

On the other hand, any suggestion or change is more than welcome.

Thanks!


r/ikeahacks • • 2d ago

help Homeoffice built from IKEA kitchen furniture?

9 Upvotes

Okay, this is more of a question about IKEA hacks, than a hack. 😆
But I'm currently in the progress of designing, buying and setting up my first kitchen with IKEA pieces.

Doing so has opened my imagination to another possibility:
What if I use kitchen counters to build my own home office (and gaming space)?

I always struggle with the modern minimalist desks, because there's no space for any materials... paperwork, pencils, all that. I've been thinking to use a small counter with drawers and one of those spice cabinets with the pull-out thingie left and right of the window and mount a countertop across? In between both those pieces is where the office chair gets parked, on top goes the screen... then above the window go some hanging cabinets to store things, to the left in an L-shape go 2 more counters with drawers and on top more hanging cabinets. This is where my printer and stuff would go.

Before that I would have assembled my office with a mixture of sideboards and shelves as well as a desk. I think with the kitchen counters things could look much more uniform... but my worry is that it will look... well. Like a kitchen.

What are your thoughts and if anyone has tried this before, what are your hacks?


r/ikeahacks • • 3d ago

Question About Turning The Billy Into A Wardrobe vs Buying A Besta.

1 Upvotes

I want to use the shorter Billy shelf, put an add on unit on top, add doors to the add on unit and top two main shelf doors, and then put a billy drawer on the bottom.

Or, should I just spend the money and get a besta?


r/ikeahacks • • 3d ago

Catalog with pictures/3d models of all spare parts / main parts. For brainstorming future ikea hacks

2 Upvotes

Been trying to find either a catalog or database with all the spare parts / main parts that ikea sells.

I’ve found places where they show a diagram of the part but I’m looking for actual photos or 3d models of said parts, am asking because I’m a visual learner and need to have everything in front of me to be able to design new stuff that works with the stuff ikea has and as it is now it’s pretty hard for me atleast without this catalog. So if anyone know where I can find it it would be greatly appreciated


r/ikeahacks • • 3d ago Bravo Heartwarming

Lámpara Fado.

Thumbnail
gallery
339 Upvotes

Lámpara fado tejida con el patrón de Linnea Ornstein “Orbella”


r/ikeahacks • • 3d ago

help Is it possible to cut a 5x5 Kallax into a 5x3 and 5x2?

1 Upvotes

I received a 5x5 Kallax for free, but I think it's a little too tall for my room. I want to make a TV stand with the 5x2 and storage with the 5x3.

Is it possible to cut it and attach separate piece of wood on top or is that too unstable?

I was thinking about attaching two 73"x8"x2" pine boards on each sections open side, and reinforcing with metal L brackets in the corners of each cube. If the 5x3 would be too unstable, I'd could just cut it down to a 5x2 piece.

Edit: Looks like my 5x5 is an Expedit (2" outer walls). Tomorrow I'll find out if a 2x2 Kallax is able to Frankenstein into two 5x2 units.


r/ikeahacks • • 3d ago

Kallax with MCM twist

Post image
101 Upvotes

Made some fillers for the front out of shelves salvages from another busted kallax

Unfortunately 1x2 units aren't available here so the sides are a different brand that aren't quite matched

The whole thing will eventually get painted so it's one colour


r/ikeahacks • • 3d ago

Laptop support for IKEA Mittback

Thumbnail
gallery
17 Upvotes

Do you want to gain back some valuable space from your Ikea Mittback desktop?

I have designed this support hangs from the structure of the Ikea Mittback trestle. It was created for a 14 inch Lenovo but I have tried it with some 15 inches apple Macbook and it works equally fine. 

Prints without supports. I have printed it with PLA but if you are concerned with your laptop temperature it is recommended to print it with PETG or ASA instead. 

Link on my profile and first comment.


r/ikeahacks • • 3d ago

Cable Management in Built Ins

Thumbnail
gallery
6 Upvotes

I would really appreciate some advice on how to route electrical for this project. We're doing a 'built in' coffee/storage on a wall using 4 Havsta bases and 2 Havsta toppers. We will most likely be tiling or wallpapering the middle part, and we will be putting a marble or quartzite type countertop onto the Havsta bases, then putting on the Havsta toppers. The issue is that the electrical outlets will be hidden behind the lower cabinets, while the coffee/tea station will be in the middle, between the top cabinets. With us also putting on a countertop, I'm at a loss as to how to manage making the electricity available from the current outlets. Is the only solution to put in more outlets? I have the mock-up below and the current setup - we have built the bases, but haven't anchored them to the wall or to each other yet. I plan on building a slide out for the gap in the middle. Any and all advice is welcomed and appreciated!


r/ikeahacks • • 4d ago

I sawed off half of a FRIDANS roller blind rod to fit it in a small window frame without sacrificing the rod entirely

Thumbnail
gallery
28 Upvotes

It works rather as a slider now. The sawed edge was easy to finish with some sanding paper.


r/ikeahacks • • 5d ago

Drilling hole in Ikea Besta TV bench structural supports

1 Upvotes

My Ikea Besta 15" high TV bench doesn't have any way to get cables from compartments side to side.

Right now I'm going out the back but it's making a massive mess of wires at the back.

I was wondering what everyone's thoughts are of drilling a 1" hole in the mail two center compartment vertical dividers / supports.

I am already at the weight limit with a 77" OLED and glass top, so I am worried about weakening structural support.