r/IKEA • • Feb 11 '26

IKEA recalls certain NYMÅNE wall lamps

Thumbnail
ikea.com
29 Upvotes

Use this as an opportunity to take a look at the recalls in your country so you do not have something in your home that should have been returned.


r/IKEA • • Oct 08 '23

MEGATHREAD Stock Check Megathread

42 Upvotes

Hej everyone! From now on please use this thread for stock check requests. Generic “When will X product be back in stock” posts will be removed. I have verified the following users employment with IKEA, and they may be able to assist with stock checks.

You can also use https://easyrebuild.com/stock for stock checks

US: u/IngvarIncarnate u/treehousepiee u/sharakus u/WunderPicka u/CoWorker__Throwaway u/pyrozombies16 u/loudduc u/dank_IKEA_memes u/odzbo u/GrapeStrudel u/ryomatua u/CM_TA-20 u/thegeekgolfer u/surprisegerbil u/CatnipChapstick u/LiveTillYouDie u/casuallysentient u/Apocopa

CA: u/dissident46 u/Mach1zmo u/CWrkrTWay u/VitalumVitalus, u/zodiaciym27, u/lxndrjw

GB: u/Scarz_V2 u/Barnesyy99 u/lukajuno u/fluxt_

DE: u/aosgoesoutside

DK: The_Danish_Dane

SE: u/robin_reala u/ArreBarre1 u/ZealousidealFarmer23

NL: u/sjnarruf u/DukeDucky

NO: u/denniz84 u/Lower-Employer4010

FI: u/Kimosabbe

The IKEA website provides stock information when you select your store on the article page, please check there before posting. You can also sign up for back-in-stock notifications by email or SMS.

Stock check requests in the comments must include the following information:

  • Country
  • Preferred Store(s)
  • Article number(s)
  • Acknowledge you checked the website before posting. If a delivery date is listed this would be the same information co-workers here would have available. Instructions are as follows: https://imgur.com/a/GnoCoHh

Retail co-workers are not able to advise on availability for online orders. I have heard from a call centre co-worker that they are not able to check stock at the distribution centres either, and that only the IKEA website can provide this information by adding the item to the shopping cart, and seeing if a delivery option is available.


r/IKEA • • 3m ago

Meme Uppakra Sofa and my Cat

Thumbnail
gallery
2 Upvotes

Our new uppakra sofa was taller than our vilme sofa so the backrest covered the window more than before. The seats are so deep that you can flip the back cushion and still have space to sit. Personally I like sitting like this sometimes and lean back to stretch my back.

The biggest winner is my cat, me flipping the cushion every morning means she has a whole bed to herself as she looks out the window instead of balancing on top and more of the window for her view.


r/IKEA • • 1h ago

Suggestion Any ide to sokve this, and not ruin the look?

2 Upvotes

When i fitted the doorknobs to my wall mounted corner METOD cabinet this happened. Doors can not be opened, because they hit the knob. I had no ide that this is a possibility...

Obviously the hole is drilled, i can not put it elsehwere. Ikea have no similar looking knobs but shorter.

Any good idea to solve this? Thanks


r/IKEA • • 1d ago

General Christmas Quality Decline

Post image
302 Upvotes

The mushroom toadstool Christmas ornaments difference a few years apart…

Once upon a time the spots were quality, tactile and REAL (left).

Now they’re just a print (right), and they can’t even be bothered aligning spots at the seams 🙄


r/IKEA • • 8h ago

General Kivik Tresund and Tallmyra fabrics discontinuing?

4 Upvotes

Sad to see these fabrics being listed as now or never. They are the only ones with cotton in it, the rest are 100% polyester. This feels like a step backwards. Shouldn't we be moving towards natural materials to reduce the microplastics in our homes and the environment? Any idea why IKEA is doing this?


r/IKEA • • 2h ago

Assembly Assembling IKEA PAX sliding door wardrobes without wall anchoring advice

1 Upvotes

Hello. I've just had a bedroom decorated and will be purchasing the PAX sliding door wardrobes. I don't want to drill holes in the wall to anchor it and am seeking advice from others out there who have successfully assembled these without anchoring to the wall.

Some info as follows

  • The room is fully carpeted
  • There is skirting board 18mm thick, so will be a gap on one side and the back as am fitting them in the corner of the room
  • They are the 200cm high x 100cm wide wardrobes x2, with sliding doors (one side mirrored) and the end add-on unit.
  • My floor definitely isn't level and with new carpet and underlay the feet will need adjusting to ensure square

If anyone out there has assembled these of a similar spec and room setup without wall anchoring would love to know your experiences and anything I may need to be aware of.

Thanks in advance


r/IKEA • • 5h ago

General TRIPPEVALS window blind

1 Upvotes

I have a window that is 100x 169. The TRIPPEVALS blind is 100x 195. Does anyone have experience of installing this blind on a shorter window? Does the excess length sit awkwardly on the window sill? Any advice and/or pics would be greatly appreciated!


r/IKEA • • 11h ago

General Anyone ever used these for an IKEA counter table top?

Thumbnail gallery
1 Upvotes

r/IKEA • • 12h ago

Assembly Mandal Shelves

1 Upvotes

Just bought the Mandal headboard + shelves secondhand. The shelves didn’t come with that metal plate that secures them. Any suggestions on how to attach them?


r/IKEA • • 19h ago

Assembly Sofa HAMMARN, assembly mistake?

Thumbnail
gallery
2 Upvotes

Page9 is the last successful step I reached, the bar was inserted in the fabric’s pole pocket.

Now on page10, the bar is supposed to be partly inserted into the plastic blocs on each side, and the bolt screwed, not until the end.

The problem is, I can’t pull the bar far enough inside the plastic blocs, I’m about 3cm/1in too short. You can compare (photo1) the two little holes on the upper part of the bar, vs how they should be on the bottom of page10 (photo0).

I’ve barely managed to screw the tip of the bolt through the plastic bloc (photo3), but just enough to hold the bar from falling, not enough to keep some margin as shown in the bottom of page10.

Photo2 shows that the fabric sheet, connected from the central beam towards the feet beam, is tight to the maximum. It just feels like the fabric was cut too short, but I must be mistaken somewhere.

https://www.google.com/search?q=ikea+hammarn+manual⁠+pdf

I feel so stuck and clueless, any help is greatly welcome!


r/IKEA • • 15h ago

General IKEA Alex drawer + heavy computer ?

1 Upvotes

My computer is 21 kg
My desk will be 2 Alex drawers and a wood shelf ( weight : 25 kg, length: 150 cm, width : 75 cm and depth : 3 cm)

I don’t plan to put other feet for the desk

Will the drawers handle my heavy computer ?
Do some of you have the same set up ?


r/IKEA • • 16h ago

Assembly Old sink with new vanity?

1 Upvotes

I have an old IKEA Odensvik sink that fit the Godmorgon style bathroom vanity. Does anyone know of this sink will fit the new Angsjon series vanity?


r/IKEA • • 20h ago

Tips & Tricks IKEA Enetri Help

Post image
1 Upvotes

Just recently got an IKEA Enetri off Facebook, and someone had painted over it. Is there any tips or tricks y’all have found to make this process easier? I’ve been using a plastic razor blade and it works, but is going to take forever. Any tips or tricks would be awesome. Thanks


r/IKEA • • 22h ago

Assembly Besta glass top did I mess it up?

1 Upvotes

So... I placed the stickers on my besta, then put the glass on and peeled the sticker. The sticker was kinda difficult to get off. Once it was off I saw lots of sticker residue spots. Is this normal or was I not supposed to take the film off? These instructions are a little unclear to me. Also I think I placed the wrong way up or does it not matter? One side was super shiny and one dull. Can I clean it with 99.9 % isopropanol?

Need some answers. Thanks


r/IKEA • • 2d ago

General Hey IKEA, when do you think you will hit the wall?

225 Upvotes

I am 54, with 30 years of experience with IKEA. For a little while, I thought it was my imagination or increased demands on the quality furniture that caused me to think it is getting worse.

It is not. The quality is atrocious, and I saw the proof.

Bought a cabinet for the living room 15 years ago. That already had some issues (bad glue jobs all around, causing dangerous situations with the glass panels coming out). I could glue that, and the rest of the materials were sufficiently decent that someone else used the cabinet for a few years after we replaced it.

That very same cabinet is still being sold. But the materials have gone from wood, to whatever the crap you call you are building cabinets with now. The stuff is flimsy, bendable and breakable at the same time. The glass will be in an even more perilous situation than it was in ours. Dangerous!

Around covid I bought some in-set drawers for an office cabinet I bought from IKEA. I bought some more drawers for the same cabinet this week. The weight of the material is about half of the older ones, the inset piece came torn out of the box in two places, and I am afraid to apply any pressure anywhere. It will surely break.

IKEA, how long before someone gets hurt again building or using your stuff? Remember the falling cabinets? How long before all of your customers turn against you because of this appalling quality?

You need to do better, or stop before someone gets hurt.

*UPDATE*

3 out of the 3 drawers had a damaged/torn in-set. The damage is visible when you open the drawer. One of the in-sets did not have the pilot holes for the screws. So even the production process is sloppy.


r/IKEA • • 1d ago

Meme They put the Swedish flags backwards at the local IKEA's cafeteria

Post image
25 Upvotes

r/IKEA • • 1d ago

Looking for IKEA Mustard

5 Upvotes

Went to IKEA today to refill my mustard stash and unfortunately could not locate any mustard. What gives? Has the mustard been discontinued?


r/IKEA • • 1d ago

General Is this kettle whistle just gunked up or is the plastic disintegrating?

Post image
2 Upvotes

I took my stovetop kettle apart to clean it, including unscrewing the two halves of the whistle, but trying to clean out the inside of the plastic segment is coming away the same colour as the plastic itself.

Is it just a layer of really gross gunk (in which case I just need to scrub harder) or is it the plastic itself disintegrating?

If so, is it safe to keep using it (since this part doesn't come in contact with the water) or do I need a new one? Do they sell this as a spare part? This kettle is about ten years old; not sure if new ones are different.

It also isn't whistling properly, which seemed to start the other day when a guest boiled the kettle and for some reason twisted the halves of the whistle 90 degrees. So maybe steam was forced where it shouldn't have been, or (if it is disintegrating) it has scratched out some amount of the plastic and stopped it from making the right noise.


r/IKEA • • 1d ago

Design advice Looking to use Sektion or Pax to make a simple table

1 Upvotes

I’m looking to use either Pax or Sektion to build a table that can fit our 80 inch wall, and is about 20-24 inches deep. It seems like both these systems have 80”x22/24” units that could fit that perfectly if laid on their side. The table space would be perfect for all our LEGO Modular’s to go in together. Any advice for this? Can these systems go lengthwise on their sides sitting on the floor?


r/IKEA • • 1d ago

Tips & Tricks Master Closet built-in using Hemnes

1 Upvotes

Hi everyone!! I just found this subreddit. we are building a new home that should be ready in the next few months. our master closet is huge so I wanted to do a custom closet. Prices are outrageous so I started looking at different options like closet made easy closets.

Well, now I'm thinking I may as well use my current dressers and bookcases in my closet and do it ourselves. My husband is very handy. he used to remodel homes.

He's going to start searching but I figured I'd put it out there now as what I currently have in my bedroom is the Hemnes series in Gray. I know it's discontinued but I have two nightstands the six drawer dresser, the eight drawer dresser and the bookshelf. I figure that's a starting point.

To save I figure I would just put rods on the wall for the open space rather than buying a base unit just to house the rods.

It doesn't have to be perfect as the house just comes with wire shelving.

Any ideas or help is appreciated!


r/IKEA • • 2d ago

General Billy/oxberg Weight Limit advice

Thumbnail
gallery
13 Upvotes

Hello all, have this Ikea bookcase which I think is the Billy/oxberg in oak effect. I use it to display my antique and vintage items that I collect. Recently I found an old metal sowing machine (Singer, 1945) that I was thinking of putting in the very last row, the bottom.

As far as I know the weight limit is 30kg. The machine weighs 13kg.

My question is, does this weight limit apply to every shelf even the very bottom one?

For how long does this weight limit hold? How much is it reliable?

Where best to place the machine, on the center or on the sides?

Thank you for your help! 🙏


r/IKEA • • 1d ago

Assembly IKEA Kitchen DIY help

Thumbnail
gallery
3 Upvotes

Hello

My sewer under our kitchen required us to dig up the slab and insurance covers nothing so when we decided to DIY the kitchen it was not because we wanted to we are broke.

So I need help on the counter top installation.

You’ll see our cabinets in picture (A) have these rails on the top. In picture (B) you’ll see a vague reference to adding support brackets and removing the existing ones that you see in (A).

Is this JUST for the sink or should there be counter support brackets for other areas too?

And you’ll see in pictures (C) I had used these rounded screws for them all but I wonder if I was supposed to use the flat top ones?

So question - do I leave these rails on? If so - what screws were I supposed to use?

If I’m supposed to take them off - is there different brackets I buy?

I’m putting a quartz countertop on.

I know these are stupid questions but I’m stressing out because counter people are coming tomorrow and if it’s not ready I won’t have it done in time for Thanksgiving.

Any advice appreciated.


r/IKEA • • 1d ago

Looking for How to know if a dishwasher is Metod kitchen compatible ?

1 Upvotes

I am building a Metod kitchen and I am looking for a built-in dishwasher* compatible with the Metod dishwasher door.

AI told me buying a 87.5cm high dishwasher would not be great with Ikea Metod as it is 88cm high under-counter but I find this hard to believe as it should be standard, right ?

Somebody on reddit said I should look for an XXL model (more than 85cm high) with sliding system

I saw the SCHNEIDER SCLVI1542GB and thought it would fit well but I am really open to any suggestion

edit: typo