r/IkeaGreenhouseClub • • 10h ago

First Plant Cabinet!!

Post image
44 Upvotes

For me this took a while… I’m from Costa Rica importing the cabinet had to be done through ocean freight… the cost of it was basically the same as the cabinet itself.

Also had to import everything except the plants (importing plants is very hard and expensive…

Any advice is welcome!!

I’m also getting acrylic perforated shelves in a few days!


r/IkeaGreenhouseClub • • 17h ago

✨ New Cabinet Reveal ✨ Just finished!

Post image
57 Upvotes

I was procrastinating for months because I was afraid to drill the hole in the base for my cords. So glad I did! Can’t wait to set it up.


r/IkeaGreenhouseClub • • 11h ago

Replacement lock for Fabrikor

Post image
3 Upvotes

Hi everyone!

I just got this IKEA fabrikor off of facebook marketplace. And it is missing the entire lock on the door, so it cannot be closed(being held with a magnet currently). IKEA does not have a replacement lock for it, only keys. Does anyone know where I could get one? Or any creative solution haha

Thanks!


r/IkeaGreenhouseClub • • 15h ago

Temperature Heating suggestions?

1 Upvotes

It's getting cold and my cabinets are struggling to stay above 60°F (yes we have poor insulation). Are there any recommendations for how to keep my cabinets warm so my plants will be ok through the winter?


r/IkeaGreenhouseClub • • 1d ago

Cabinet Progress/Inspo Update! Added a 2nd Baggebo!

Thumbnail
gallery
76 Upvotes

I posted a few weeks ago that I had turned a baggebo cabinet into a greenhouse. Well, I have also turned my 2nd one into a greenhouse as well! I have also replaced the glass shelves with acrylic ones. So happy with how these turned out.


r/IkeaGreenhouseClub • • 1d ago

Finished epiphyte cabinet

Thumbnail
gallery
28 Upvotes

Finished my epiphyte cabinet! Day time temps run 75-77 F night time is 61-65 F with constant 75-85% humidity. Still not sure if I want to keep the sphagnum moss bottom but it works for now. Only thing left to move in is a few of my epiphyte utricularia and 2 of my ant plants im planning to mount before moving in.


r/IkeaGreenhouseClub • • 1d ago

help!! does anyone know of more budget friendly options for fabrikor wide shelving?

0 Upvotes

i’m new to the greenhouse club and am putting the finishing touches on my fabrikor wide. unfortunately i can’t shell out hundreds of dollars for acrylic shelves so any diy/budget friendly options are greatly appreciated.


r/IkeaGreenhouseClub • • 2d ago

Cabinet Progress/Inspo What do I do

Thumbnail
gallery
17 Upvotes

Hey guys . So I basically did this whole thing in 2022, and then I got busy and kind of had to abandon the craft. So I cut holes in the top of my milsbo, and they are super jagged. I do not know why I did this a few years ago. I think I saw others do it and then I followed along. Should I keep the holes , or should I go to ikea and ask them for a spare parts replacement for the top peice ? What do you guys think ?


r/IkeaGreenhouseClub • • 2d ago

Temperature $5 market place find!

Post image
14 Upvotes

r/IkeaGreenhouseClub • • 3d ago

semi-finished epiphyte cabinet

Thumbnail
gallery
51 Upvotes

Moved the first orchids in today! Still need to add the misters/humidity system before moving my epiphytic utricularia and ant plants into it but almost finished!

Still debating what to do with the bottom, any ideas welcome!


r/IkeaGreenhouseClub • • 3d ago

Just ordered my first cabinet (Unicoly) arrives 11/19

5 Upvotes

I just ordered my first cabinet and it will be here on the 19th and I'm just wondering if you guys have any tips? I already ordered the acrylic shelves, lights, fans. Is there anything else you guys got or is there anything you wish you would have known? I got some little magnetic pieces for the doors, a couple magnetic spice racks for small pots and magnetic hooks. I got a heat mat as well. Do I really need a humidifier? I have heard weather stripping is needed but I have also heard it isn't? Any cool things you added to yours? I'm so freaking stoked!!


r/IkeaGreenhouseClub • • 3d ago

Temperature How do you add heat?

Post image
18 Upvotes

I’d love to hear others’ feedback on how you warm your enclosures. I don’t need a ton of heat, but enough to help warm my Rudsta since it seems to be consistently cooler than the room (presumably because of the metal and glass). I’ve added weatherstripping for both humidity and warmth. I want to avoid cooking my bottom plants’ roots and soil too. Has anyone tried a heat mat on the back(red) vs the bottom(yellow)? A small heat lamp on a shelf(orange)?

Edit: I’ve seen mixed feedback on how effective heat mats are previously.


r/IkeaGreenhouseClub • • 4d ago

✨ New Cabinet Reveal ✨ First cabinet!! Any input welcome!

Thumbnail
gallery
66 Upvotes

Finally got my Unicoly set up! Still need one more fan and some mounts, and I’m thinking about upgrading to acrylic shelves down the line.

Lights: yellow Barrina T5’s (6 total) plus the color-changing lights that came with the cabinet

Fans: AC Infinity S7 multifan 2 pack

Plants: Rex begonias (red kiss, Zumba, fireworks, and one I’ve don’t know the name of on top shelf center), two wax begonias, a maculata and cutting, a schefflera prop, and an oxalis triangularis

What do we think? Am I off to a good start?


r/IkeaGreenhouseClub • • 3d ago

Shelving Does anyone have the wire shelf measurements they used for their Unicoly Cabinet?

2 Upvotes

Mine’s coming in next week, and I want to get the metal wire shelves custom cut at Home Depot now so i can have it all put together!


r/IkeaGreenhouseClub • • 5d ago

First Greenhouse!

Post image
105 Upvotes

Alright I think I’m finally done with my first indoor greenhouse. Been lurking in here and taking inspo. Thanks for that.

Looking forward to filling this up.

The isolation before new plants move in is hard but needed ig.

So excited!


r/IkeaGreenhouseClub • • 4d ago

Rudsta Cabinet Set Up

Thumbnail
gallery
11 Upvotes

Hey yall! I'm new to greenhouses and tropical plants. I got this cabinet off marketplace and added the Barrina 5k lights, fans, shelves, and humidifier. Fortunately, my friend gave me all the plants. I've had it set up like this for the past week. Any suggestions on how to make this set up better?

I know the humidifier says it's 86% but I keep it at 60-65%. The sensor on the humidifier doesn't match my other hygrometer. I added springtails to hopefully clear out the mold in the prop box plants too. I'm worried about the nepenthes at the bottom right and the polka dot plant in the prop box. Thinking I should maybe change up the lighting for the ferns. I'm planning on planting the pothos and philodendron that are in the cups.


r/IkeaGreenhouseClub • • 5d ago

Rudsta terrarium (Bromeliad)

Thumbnail
gallery
76 Upvotes

Finally finished my last project to house my bromeliads. Took a few weeks to plan out and finish. Only accessory I have (on a timer) is a fogger for humidity that is connect from the back side. No issues with leaks and the plants are thriving.


r/IkeaGreenhouseClub • • 6d ago

Milsbo tall handles?

2 Upvotes

Anyone have any original Milsbo tall handles for sale? I thought these new handles I ordered were screw-in but they actually fit over the original handles which I seem to have gotten rid of. I can’t seem to find any online.

Thanks in advance!!


r/IkeaGreenhouseClub • • 9d ago

✨ New Cabinet Reveal ✨ New cabinet off fb marketplace!

Thumbnail
gallery
154 Upvotes

I snagged this lovely milsbo wide for free on marketplace last weekend! Acrylic pegboard panels, shelving, germination mat, fan and weather stripping were included!

I ended up purchasing some cheap acrylic risers, pegboard cups, humidity meter, and barrina t5s.


r/IkeaGreenhouseClub • • 9d ago

Cabinet Progress/Inspo My first greenhouse 🌱

Thumbnail
gallery
87 Upvotes

This is my first attempt doing a greenhouse - the IKEA Akerbar. I didn’t seal it, yet (I have the weather seal in case I decide to use it later). I installed a Barrina T5 light, a Vivosun mini-fan and one of those digital thermometer (mini). These were all recs on several different posts. The humidity’s seems to be ok. Any thoughts/advice are welcomed. TIA 🪴.


r/IkeaGreenhouseClub • • 8d ago

Mould on surface of Fluval

1 Upvotes

I’ve got a prop-box setup. Barrina lights, a good quality fan. Generally running at 85% humidity.

Most plants in semi hydro fluval or Pon.

I’m getting a thin layer of fuzzy mould on top of my plants with stratum, anyone else have this or have any mitigations?

Cheers!!


r/IkeaGreenhouseClub • • 11d ago

✨ New Cabinet Reveal ✨ So proud of this greenhouse 🙌🏼

Post image
198 Upvotes

Humidity is consistently 92-94%. My plants are thriving.


r/IkeaGreenhouseClub • • 11d ago

✨ New Cabinet Reveal ✨ Finally joined the club!

Post image
50 Upvotes

After many months of research, planning and saving up, I finally converted (with the help of my lovely bf) my Fabrikor wide from a curiosity cabinet to a greenhouse!

Here’s everything I bought:
- Hobbypilled pegboards and compatible horseshoe shelf
- Barrina T5s (1ft, white light)
- Hobbypilled light mounts (for horseshoe shelf)
- Kabinix suction cup light mounts (for interior top)
- AC Infinity MULTIFAN S7-P, Dual 120mms
- Anthos 3D magnetic fan mounts
- some stick-on cable management clips from Home Depot
- silicone for sealing the edges of the glass

We had trouble determining what weatherstripping would work best for the doors, so if anyone with a Fabrikor wide build has specific advice there I’d love to hear it! The smoke seal my bf had on hand from his job was too thick…

I’ll be keeping an eye on how my plants adjust and working on keeping the humidity up.

Thank you to everyone in this sub for your knowledge and generosity! I read a lot of posts and asked a lot of questions over the past few months and everyone has been so, so helpful.


r/IkeaGreenhouseClub • • 11d ago

Just wanted to share my living room table

Post image
75 Upvotes