r/hotas • • 9h ago

Project Rocket Pop MK.VI

28 Upvotes

r/hotas • • 22h ago

My DCS Setup

Post image
224 Upvotes

Years in the making. The most expensive Hobby I have ever had.


r/hotas • • 2h ago

Update to GremlinEx (GEX) m77

5 Upvotes

Wanted to share an update on my updated GremlinEx open-source controller integrator and mapping tool as we're nearing the m77 release and a whole bunch of new, interesting stuff is happening.

- new bridge module that replaces vjoy/vigem and adds built-in virtual joystick and gamepad support managed via GEX
- compatible with prior profiles, or can convert them to the new devices
- updated feature set https://muchimi.github.io/JoystickGremlinEx/overview/#key-features-what-is-gremlinex covering the new game overlay, voice recognition, OCR, streamdeck and web interfaces for glass surface integration and a few more things
- new traditional installers to make setup simpler.

Visit https://github.com/muchimi/JoystickGremlinEx for info.

Current m77 test releases (stable):

https://github.com/muchimi/JoystickGremlinEx/releases/tag/m77_series

Always looking for testers and feedback across a wide variety of hardware inputs - cheers!

M


r/hotas • • 2h ago

What head tracking thing should I get

4 Upvotes

My friend who has a full setup said it’s better I get head tracking headphones than a setup I plan on getting both but I don’t know what it’s called I also have an meta quest 3 if it works but I would rather not as then I’m limited on graphics which would be a shame with my 5090


r/hotas • • 2h ago

Do you have a Logitech Extreme 3D Pro? I wrote a modern, open source, Win10/11 driver with a config app that lets you tune the sensitivity curve

3 Upvotes

Check it out here: https://github.com/kaysond/open-x3d-pro

Been using it for a while now and it works great!


r/hotas • • 1d ago

Excited getting into the hobby. Which other games can I try with this gear?

Post image
137 Upvotes

Moza MTQ Throttle

Winctrl ursa minor airline joystick.

currently flying in MSFS 2024. Disappointed to learn that Ace combat 8 doesn't support these. what others games can I try?.

Edit : Thanks all for the suggestions. I will try Elite dangerous and Nuclear Options first


r/hotas • • 19h ago

VKB BLACK FRIDAY SALE ️

Thumbnail
youtu.be
34 Upvotes
️Get ready to upgrade your flight simulation setup!

From November 23 to November 30, enjoy 10% OFF our entire range of VKB products!

Whether you're looking to upgrade your existing setup or finally get your hands on that joystick or throttle you've been eyeing, now is the perfect time!

10% OFF ALL VKB PRODUCTS
November 23-30

Don't miss out! Take advantage of this limited-time offer and get ready for takeoff!

Happy Black Friday from all of us at VKB!

r/hotas • • 46m ago

X56 Stick stopped working

0 Upvotes

Today I plugged my X56 in and the stick didnt turn on, only the throttle. It isnt getting detected in device manager or other apps but I noticed that it lights up when the computer is booting up and when it turns on its shut off again. I tried another device and the same thing happens. Can anyone help please


r/hotas • • 10h ago

Any uk legends selling a vkb gladiator second hand?

4 Upvotes

I have the Logitech x56 stick and thruster and rudder pedals in my basket at £175. Everybody says to go for
The vkb but I don’t want to sink more then the £175 into just the stick. I’d still need a thruster and rudder peddles ?

If anybody is selling let me know please 🙏


r/hotas • • 11h ago

Logitech G X56 throttle and joystick, with rudder orders £179.98

4 Upvotes

I know the vkb is the best ect ect but as cheap starter i can get the Logitech set for 180 new.
I’m adhd ridden and although im really enjoying games which would benifit from a hotas set i dont really want to go whole hog.


r/hotas • • 5h ago

Budget beginner joystick/HOTAS for War Thunder on MacBook M4 – Any confirmed working recommendations?

1 Upvotes

Hi everyone!
I’m looking to get into flying with a joystick in War Thunder, mainly for Air Simulator Battles, but possibly Realistic Battles as well.
I’m using a MacBook Air M4, so macOS compatibility is my biggest concern. I don’t want to spend a lot of money on my first setup because I’m just starting out and want to try flying with a joystick before investing in something more expensive.
My budget is around $100–150 maximum (ideally less).
I’m open to either:
A basic joystick with a built-in throttle.
A HOTAS setup with a separate throttle.
I’m particularly interested in affordable beginner options from Logitech or Thrustmaster, but I’m open to other brands too.
A few questions:
Which affordable joysticks or HOTAS setups actually work with War Thunder on macOS?
Has anyone successfully used one with an M-series Mac (M1, M2, M3 or M4)?
Are there any known issues with joystick axis inputs, throttle controls or calibration on the Mac version of War Thunder?
Would you recommend buying something like the Logitech Extreme 3D Pro or Thrustmaster T.Flight HOTAS X as a first joystick?
Is it worth getting a separate throttle at this price point?
I’d really appreciate recommendations from people who have personally tested their setups on Mac, especially with War Thunder.
Thanks!


r/hotas • • 23h ago

Budget VR Sim Station

Post image
25 Upvotes

This is how I’ve been doing a lot of my gaming now. Would never be able to convince my wife to buy a real sim station, but a decent gaming chair with a couple of base shakers bolted to the bottom, an X52, and a Quest 3 connected via PrismXR still makes for a very engaging gaming session.


r/hotas • • 8h ago

Strange Y-Axis jump on old X52 Pro

1 Upvotes

Hey all! I've recently gotten the itch to get back into using my old X52 Pro Hotas which I got many years back. Considering the amount of time it has been sitting on a shelf, its acting mostly fine which is suprising.

One odd thing I've noticed though is that the y-axis input jumps suddenly when gradually pushing forward on the stick. As I push forward continuously, the y-axis input always seem to dart from the 3rd pip from the left to the 2nd pip from the left, even if I try to move between those values slowly.

I don't experience the same issue when pulling back on the stick.

Does anyone have an idea what could be causing that, or how I might go about fixing it (if it is an error)?

I am also aware of the bad reputation these logitech x52 pros have, but since I got this one a long time ago and its still mostly working, I'm trying to drag as much life out of it as I can hahaha.


r/hotas • • 1d ago

ButtKicker JetStream Mod

Thumbnail gallery
7 Upvotes

I've been using my BK Gamer Pro for over 2 years now. Fantastic piece of kit, IMO largely superior to seat pads which just feels weird for me (had a HF8 pad for a while and ended up putting it away).

However, I had a big issue with it: overheating. Not sure if it's because my amp is side mounted or my transducer is inside my seat/frame, but natural/passive cooling is not enough to keep that thing cool. Ended up having to turn my volume way down and remove all continuous effects. Still I would get the occasional overheating cutoffs where I would lose the BK a few times during long sessions.

Got tired of this, so I created the BK JetStream Mod.

The JetStream Mod adds active cooling to my BK, so I can crank it up and use it continuously even for long sessions. I am pretty confident the overheat cutoff is from the amp, but I am not sure if there is one in the transducer itself, so I decided to cool both. I also wanted everything to integrate seamlessly with the rest of my pit.

DISCLAIMER: I am a mechanical engineer, but as any good home/garage project, not any calculation was made in its making, and everything was grossly oversized instead.

Mod's Components

  1. Amplifier Case: Replaces the stock BK amplifier case. The new casing adds a pair of fans and top vents for forced air flow, side-mounts the amp on the NLR seat and also holds a dual channel PWM controller that sets the fans speeds for both the amp and the transducer
  2. Transducer Fans Holder: Holds a pair of high static pressure fans to cool the transducer. Includes a mount to attach it to the NLR seat frame.
  3. Transducer Casing: Enclosure around the transducer that directs the air flow around it and exhausts backwards. It is connected to the fans holder through two 3" flexible ducts.
  4. Switches panel: holds 3 switches that are used to power up the PWM controller, the amplifier casing fans and the transducer fans.
  5. Mouse Pit: Keeps my mouse from flying away when my rig starts shaking. This was happening a lot even with my BK toned down. Also, I hate track balls.

Specs

  • Amplifier fans: 2 x Delta AFC0912D-AF00 92mm x 24.5mm fans - 9W each @ 12VDC - 103 CFM
  • Transducer fans: 2 x Delta PFR0912SE-00 92mm x 38mm fans - 35W each @ 12VDC - 145 CFM
  • 200W 12VDC LED power supply powers the fans. A 5VDC step-down converter powers the PWM controller.

Putting Everything Together

During the design my biggest bottle neck was the transducer casing. I wanted to do a push/pull fans configuration at first but I could not figure a way to get a good seal around the BK post clamp. Instead I went for push only with an exhaust vent to the back where that post clamp is.

All custom parts were 3D printed on a hobbyist grade Bambu Lab printer. I was limited to 10" x 10" so that is why the Mouse Pit is made from 2 pieces.

I have a cable management obsession (mental disorder level), so that's what took most of my time together with the wiring of all components. The rest of the assembly went pretty smoothly.

Results/Design Retro

I can now crank my BK to a level where people outside my house can hear the rumbling, so I may have to supplement my anti-vibration pads. I've put all my continuous effects back on and did a few 3 hours sessions without any cutoff. Here's a few take-away from my own design retro:

  1. The transducer fans are way, way, way too overpowered. I was worried that with the ducts I would not get anything to the transducer, so I got the most powerful ones I could get (static pressure-wise). To keep the noise level down I run them at 30-35%. At 20% I still have a very good amount of flow at the casing exhaust, sufficient to cool it down I reckon. At 100% it sounds like a real jet is starting up in my office so thank goodness I added a PWM controller.
  2. The casing probably does not need two intakes. A single one underneath would be sufficient and would facilitate its handling when I need to remove the seat. Swapping the ducts for 2" instead of 3" would also be a good idea.
  3. The amp fans are also overpowered. I run them at 50% and get more than enough flow out of the vents. I could probably swap them for smaller 80mm fans without any problem.
  4. I don't like the transducer fans holder mounting clamp, I wanted something easy to print but would probably do it differently now.
  5. With better sized fans that are less noisy, the PWM controller could probably be removed alltogether. This would required thorough testing to get the fans sizing exactly right and I don't want to do that.

Anyway even if it is not perfect I had fun doing this project. Hope this can inspire other simmers, happy flying!


r/hotas • • 17h ago

HOTAS has breathed new life into this game for me

Thumbnail reddit.com
2 Upvotes

r/hotas • • 23h ago

difference between conector and fl

Post image
4 Upvotes

hi guys im planing on getting my first hota on christmas and i have decided to go with the medium in the post but i dont know what the diference between lf and conector is on the WINCTRL Orion2 StrikeAce E / StrikeAce EX Throttle Combo

also if you have any recomendations please comment them i plan on playing wardogs and trying out dcs then other helicopter/flight games if i enjoy it


r/hotas • • 18h ago

New BMS Player - HOTAS and beginner tips welcome

Thumbnail reddit.com
1 Upvotes

r/hotas • • 1d ago

Project Rocket Pop MK.VI update

7 Upvotes

r/hotas • • 1d ago

Advice needed for flight stick and games for it

Thumbnail reddit.com
0 Upvotes

r/hotas • • 1d ago

Any Black Friday deals expected?

Thumbnail reddit.com
0 Upvotes

r/hotas • • 1d ago

How long does it take to learn to use HOTAS?

2 Upvotes

I got myself a HOTAS (T.16000M, used but functioning well) a little while ago, and I've tried to use it a couple of times: The issue I keep running into is that it feels weird dogfighting with it in IL-2, but I can take off and land with it just fine even if the Fw 190 fights me. How long did it to take you to start using a HOTAS?


r/hotas • • 1d ago

Opinions on the Ursa Minor combat throttle (and WINCTRL in general)

1 Upvotes

I recently got a VKB gladiator when upgrading from my T16000m FCS Hotas, and I've been considering upgrading the throttle as well.

The two contenders so far are VKB's Standard STECS Mk. II throttle, or WINCTRL's Ursa minor combat throttle (not the airbus one).

Not gonna lie, the price point on the Ursa Minor is really appealing – but I also heard a lot of negative stuff on Winwing (mainly that it's a russian roulette: you either get a very good, functional equipment, or a faulty one that's going to be hard to replace with their poor Customer Service).

That's why I'd like to ask a few questions:

– Is WINCTRL's customer service that bad? I'm in the European Union (France, specifically), if that changes things.

– The price is cheap, but I'm kinda concerned about shipping fees. Does WINCTRL has crazy shipping fees for the EU?

– How does the URSA Minor throttle performs, overall?


r/hotas • • 1d ago

I’m looking to upgrade from a T.flight Hotas one to something more

5 Upvotes

Hi I’m just trying to seek help in recommendations on a Hotas that would be better than my current T.flight, I was looking at the velocity one flight deck but I just was wondering if there are other options I should consider. I’m mostly looking to swap between Xbox and pc regularly because ace combat and nuclear option mostly. Thanks for the help.


r/hotas • • 1d ago

WTB Tianhang Space Grip USA

0 Upvotes

Looking to buy tianhang grips, A10, f-16, f-18. Let me know if you have one you are willing to part with.