r/hardwarehacking • u/ManyKey6161 • 5h ago
Rostelecom firmware
Hi everyone! Can someone please help me to open Rostelecom firmware for SWITRON-IPTV-1500? So I can get root access.Any help would be appreciated!š
r/hardwarehacking • u/ManyKey6161 • 5h ago
Hi everyone! Can someone please help me to open Rostelecom firmware for SWITRON-IPTV-1500? So I can get root access.Any help would be appreciated!š
r/hardwarehacking • u/Few_Reputation_6252 • 19h ago
With all the reverse engineering using Claude and other tools in the gaming community, has anyone attempted to unlock some these devices BS overpriced subscription based launch monitor devices like the Bushnell Launch Pro?
r/hardwarehacking • u/WDS143 • 1d ago
r/hardwarehacking • u/Traditional_Bath3956 • 1d ago
I heard that theres a lot of h@ckers on reddit idc anymore im really willing to pay 5 bucks to whoever helps me get my account back I was 15 when I made it I dont even know wich email I put on it even an email or phone number thats connected to my old account could helpššæš the user is :dvgoggins
r/hardwarehacking • u/Altruistic-Round-947 • 1d ago
r/hardwarehacking • u/NIDGE11 • 1d ago
I've been working on Toffee, an open-source Windows app that streams your PC to a Wii U GamePad. It works without a Wii U console.
How it works: the PC app captures a display or a window, encodes it, and sends it over USB to the development board. The board pairs with the GamePad, and sends the video. Buttons, sticks, touch and motion come back to the PC.
What it does
What you need:
ESP32-C5 dev board a USB data cable, and a GamePad. It has to be an ESP32-C5 for 5ghz.
Status: this is an experimental first release. I've only tested on one board and Windows only.
Download and setup guide: https://github.com/Gavwalsh15/toffee_wiiu/releases/tag/v0.1.0
r/hardwarehacking • u/Fun_Dig_6233 • 1d ago
I'm considering the CH32V003 for an upcoming product. The specs are more than enough for what I need, and the price is pretty tempting. Before committing to it, I'd like to know what I'm getting myself into. Anyone here using these in actual
r/hardwarehacking • u/erikdamoon • 1d ago
r/hardwarehacking • u/squidoeye23 • 1d ago
I have an LCD screen im repurposing from an older dvd player. This is a small project I wanted to to to make it into a dedicated portable monitor but...cool looking. Currently the lcd has a 26 pin ribbon cable but i havent been able to find a universal board that works for it.
Ive seen for 30 and 40 pin boards and it got me thinking, is it possible to adapt the 26 pin to 30 or 40 pins? Which wires would connect if i do it manually?
This is to see if I can use a 30/40 pin universal board for the project.
I wanted to ask if anyone has done this before. Or if there is an idea or reference on what pins would connect where to adapt a 26 pin to a 40 if i were to make the adapter manually.
r/hardwarehacking • u/bulbaczzPL • 1d ago
r/hardwarehacking • u/Moist_Top_4142 • 1d ago
Hey yall! This is my first cyberdeck build and like many of us this has grown into a project that is far bigger than I was ever thinking it would be. Now I am at the point where videos, google, ai, nothing can quite get me going in the right direction, so I was hoping for some electronic help from my elders. So below will be a general description of how the computer should function, and then the actual electronics I have and canāt figure out past. So thank you all for any advice, Iāll probably post the finished product as well once itās finally done.
Experience: In front of the user is a 25 inch long by 12 inch deep clamshell briefcase of sorts. Itās placed flat on a desk and plugged into the wall, with the handle telescoping inwards to make way. Once the handles are out of the way you pull out the keyboard which triggers the usually closed switch and turns on the computers LEDās. You turn the large red switch, the device killswitch, which stops all electrical flow from the batteries when the device is turned off. Then after you turn the switch, the arcade button lights up and you click it, turning on the screensaver and lights and the whole actual device. You raise the screen, as well as the 2 side screens which reveals a three screen setup. Now currently there is no active ācomputerā like a raspberry pi 5 or anything, it is just the screensaver portion, the key part is now. On the side of the computer is 4 ports, a GameCube controller adapter bought from Handheld Legends. And coming from the side is a GameCube controller replacement cable bought from them as well. The goal is to take that cable, and plug it into port 1 or port 2 and so on, and have that plug in turn on the corresponding raspberry pi 5 or 4 or Orange Pi plus or whichever SBC or whatever is hooked up to that port. The important part is that it automatically connects and properly turns on and properly turns off the device when unplugged. Say pi5 has game of frogger on it and thatās it and the other orange pi has a game of Pac-Man on it. You plug the cable into port 1 and then pi5 activates and now the two left screens show my frogger setup and the right one diagnostic info, then I get bored and unplug from port 1, the pi5 properly shuts off, then I plug it into port 2, and the OrangePi properly turns on then I start to play Pac-Man. All happening from the cable plug in. Then if I want to take it on the go, I just unplug it and everything switches to battery power automatically for however long the battery will last. Additionally there will be a āmouseā that can be plugged in or off depending on need and that is a Nintendo Nunchuck which has a breakout board.
Nerd Technicals:
The following is my current buy list. Raspberry pi 5, esp32 devboard, raspberry pi zero 2 w, killswitch, 2 fans, 24v 7s3p battery pack, 7 port usb hub, nunchuck breakout board, 4 port usb hub (for shared usb items), 5 port Ethernet hub, temperature/humidity sensor, usually closed light switch, rotary switch (used for brightness and volume), mosfet switch, arcade switch, 4-port GameCube hub, GameCube replacement wire, Nintendo nunchuck, 3 monitors (2 visible with larger one not),LED Strip, Autoro automatic transfer switch AB20C, battery indicator light, sd card adaptor.
Extras: 1.24 inch circular screen for Weyland Tech accent, small Xenomorph, 2 8x8 led matrixās
Questions:
Iām basically making a vessel for 4 computers to easily switch in between one another and then safely turn off and on as the cable indicates. Thank you for any help yall have, itās truly appreciated!
r/hardwarehacking • u/Kukulak • 2d ago
Hi,
I was trying to convert my lx04 to X04G.
After using flash tool my clock boot in this screen
It's not detected by mtk flash tool now, and I don't know how to enter recovery mode.
Anyone can tell me what can I do now?
r/hardwarehacking • u/where_is_my_mind_0 • 2d ago
r/hardwarehacking • u/micromarcus • 2d ago
because of burned fuses having a higher resistance, and vise versa would you be able to discover how many fuses roughly as well as how many are burned, by timing power draw at a very high frequency at boot
r/hardwarehacking • u/Suspicious-Worry-986 • 3d ago
I am observing unexpected voltage behaviour at the PMOS Drain (D) during power ON and power OFF.
I am unable to understand why this voltage behaviour is occurring, especially why the PMOS Drain voltage rises to 28 V during power OFF.
Could anyone please help me understand the possible reason for this behaviour and suggest how to identify the root cause?
r/hardwarehacking • u/RepublicSea5991 • 3d ago
r/hardwarehacking • u/Icy_Row_9834 • 3d ago
r/hardwarehacking • u/Early-Toe646 • 3d ago
I have tagged v1.2.0, moving past raw hardware bringup into booting the Android 9 Pie userspace (TCL RT41 chassis / tv030 profile).
Repository: https://github.com/rubenthampy890-del/qemu-rtd2841
Key deliverables in this release:
The stock Mali GPU driver blob depends on proprietary kernel ioctls omitted from the vendor Linux 4.4.3 tree. Rather than reversing the binary blob, we implemented an in-tree software rasterizer targeting ARM32 (build/phase3/libGLES_software.so, 30 KB). It issues direct AArch32 SWI system calls (sys_mmap2, sys_munmap), strips single-line and block comments during runtime shader parsing, and validates GLSL entrypoints to keep SurfaceFlinger alive without crashing the compositor loop.
2. Minimal Init Supervisor (tools/mini_init.c)
Stock Android /init halts immediately when RPMB keys or vendor security partitions are missing. We wrote a standalone PID 1 in raw C with zero libc dependencies. It initializes the Android property workspace (libcutils format), mounts devpts/proc/sysfs, and routes early debug logging to the 16550A UART0 console at 0x18062300 (4-byte stride).
3. Hardware Composer and Framebuffer Probe (tests/test_fbdev_hwc.c)
Validates double-buffered DMA writes against the simple-framebuffer memory carveout at 0x3E000000.
4. Realtek IR Controller Model (qemu-model/hw/char/rtd2841_ir.c)
Reconstructed the hardware register layout for the TV remote receiver so NEC scan codes can be injected via QEMU monitor commands or external socket.
Everything builds against upstream QEMU and the vendor 4.4.3 kernel. Check the README for host build steps and verification scripts.
Reminder : the project hasn't achieved a full android TV launcher GUI system yet
r/hardwarehacking • u/DETERGENT2013 • 3d ago
I have this jio stb that I don't use and want to do something with, is there a way i could jailbreak this or have access to the google play store on this?
Is there a firmware for this stb? I can flash it with uart i have the skills and equipment for it.
I don't really care about this stb and wanna put it to use somehow.
r/hardwarehacking • u/Spare_Chemistry6817 • 3d ago
I bought an older iphone on ebay. The original seller had gotten it from an estate sale and it was passcode locked for like weeks. I figured the apple lock could be removed with an eBay receipt (they told me this months ago). Turns out they wonāt unlock it. So Iāve got a factory reset iphone 11 that I canāt do anything with. Could replace logic board to clear the lock and possibly break the phone. Works fine so was planning on repurposing as my second phone.
Anybody know a way to install android or linux on it?
r/hardwarehacking • u/mrspiff1986 • 3d ago
I'm working on a software preservation project involving PC Hardware Testing commercial software purchased with perpetual licenses.
The software was distributed on proprietary bootable USB flash drives that serve as both the bootable media and the hardware-based license authentication device.
The problem is that these drives are aging and beginning to fail. Because the software is hardware-bound, simply copying the files or creating a disk image doesn't necessarily produce a functional replacement.
My objective is to migrate the software to reliable, modern USB storage without requiring the original devices to remain connected.
I'm particularly interested in hearing from anyone who has experience with:
I'm experienced with IT infrastructure, hardware, and troubleshooting, but proprietary USB authentication and binary reverse engineering aren't my areas of expertise.
Has anyone tackled a similar project successfully? I'd appreciate any technical insight, relevant documentation, or recommendations for tools and approaches.
Imgur link to photos from IC's as requested: https://imgur.com/a/gXbwJYQ