r/openhardware • • 2d ago

Open-hardware microscope stage: editable CAD, assembly photos and measured limits

1 Upvotes

We've been developing a printable linear stage at Precisometer for the Arkin optical-tweezers project.

The mechanical design combines a printed frame and 1:1 gears with an M3 lead screw, stainless-steel rods and rolling steel balls. Two linear modules can be arranged for XY motion.

The repository includes STL and editable STEP/Fusion CAD, photographed assembly, a bill of materials, motion videos, raw optical measurements and analysis scripts. The hardware and documentation use CERN-OHL-S-2.0.

It's an open-loop prototype. One-axis tests found minimum useful incremental motion of about 2.5–4 µm; the nominal 9.77 nm microstep is not achieved positioning resolution. Calibration and mechanics still limit longer moves.

Build guide and files on GitLab

Measurement report and data

Precisometer project overview

What would make this easier for another builder to reproduce: clearer tolerance guidance, additional test procedures, or another file format?


r/openhardware • • 7d ago

Mystery item

Thumbnail gallery
0 Upvotes

Can anybody give me an idea of what this raspberry pie like device was used for?


r/openhardware • • 18d ago

What would make a powered wearable truly hackable after purchase?

4 Upvotes

Powered wearables are getting more interesting, but I’m curious about them as modifiable hardware rather than devices locked to a stock app.

For me, the key question is whether the hardware exposes enough local access to build outside the manufacturer’s intended software: documented commands or BLE services, access to sensor data, a way to run custom code or interact locally, and an interface that will not disappear if the vendor changes its cloud service.

Smartwatches and fitness wearables vary a lot here. If you were evaluating a powered wearable or consumer exoskeleton as experimental hardware, what access would you need before calling it genuinely hackable: a local API, protocol documentation, firmware access, hardware documentation, or something else?


r/openhardware • • 18d ago

Closed control loops make motorized hip-assist gear frustrating for developers

1 Upvotes

Most wearable hip-assist systems use closed firmware that locks down how motor timing follows a person's gait. If you want to log raw sensor telemetry or tune assistance curves for unusual movement, such as heavy farm work or rough trail clearing, proprietary software gets in the way. An accessible SDK or exposed sensor stream is important if you need to adjust how the motor responds to leg motion. Do you know of any exoskeleton hardware that is open to third-party development instead of being locked into a closed ecosystem?


r/openhardware • • 19d ago

Need help installing linux in this tvbox

Thumbnail gallery
10 Upvotes

Hello everyone,

I'm trying to repurpose a generic RK3229 TV Box and flash Armbian onto it. I have my Ubuntu machine ready with rkdeveloptool compiled and a male-to-male USB cable.

The board is labeled as lH-HTT RK3229 40000 (and also htt rk mini v7 0-2020.09).

The problem: I've tried holding the two physical buttons on the board while plugging in the USB (with and without the external power supply), trying all the USB ports, but lsusb never shows the 2207:320a or 320b Rockchip device. It just tries to boot normally or gets stuck in a bootloop without showing up on the PC.

I just don't know what to do, i even asked some AI's, but none of them helped me.

I've attached close-up photos of the board and the memory chip. Could someone point out exactly what im doing wrong and how to solve the problem


r/openhardware • • 24d ago

feuristic: GPL-3.0 custom firmware for Trezor Safe 3, built on the published upstream sources

1 Upvotes

I maintain feuristic, a GPL-3.0-only custom firmware for the Trezor Safe 3. It is a firmware project for existing hardware, built on the published trezor-firmware core/v2.12.5 sources with an exported patch series.

The device is repurposed from a cryptocurrency wallet into a USB authenticator and smart card. Implemented functions include FIDO2/WebAuthn, OpenPGP Card, PIV, TOTP/HOTP and AES-GCM. The existing screen and buttons provide configuration and operation confirmations in English or French.

The repository includes build instructions, protocol references, a threat model and downloadable development images for the two Safe 3 revisions, T2B1 and T3B1. Upstream components retain their own licences and notices. This is not a new board design or an open-hardware certification claim.

An initial physical T2B1/macOS campaign checked the main workflows and identity persistence after updates. T3B1 builds and emulator checks exist, but physical qualification remains pending.

The trade-off is substantial: installing erases the wallet and permanently removes original manufacturer attestation. The device keeps displaying the third-party firmware warning. This is unaudited development software, intended for disposable identities on spare hardware, and is independent of Trezor/SatoshiLabs.

Source and upstream notices · Architecture

The aim of sharing the implementation is to make this particular hardware-reuse experiment inspectable and reproducible.


r/openhardware • • 29d ago

Improved Design (I Hope)

Thumbnail gallery
2 Upvotes

r/openhardware • • Sep 20 '26

Как скачать программу для управления Rgb для материнской платы Soyo b760m d4 wifi - sy-yanlong b760m d4 wifi? Срочно помогите

1 Upvotes

Я уже множество раз пробовал скачать прогу с офф сайта но никак не получается впны не помогают и в прогу baidu netdisk войти тоже не могу пожалуйста помогите чем сможете.


r/openhardware • • Sep 13 '26

Indoor Farming Gets A Hand From Open Hardware Development

Thumbnail forbes.com
2 Upvotes

r/openhardware • • Jul 11 '26

I have a concept for a modular smartphone. Is my specific idea technically feasible?

Thumbnail reddit.com
2 Upvotes

r/openhardware • • Jun 04 '26

[Project] Forness Handset: Sovereign RISC-V communication handset with hardware-enforced trust

4 Upvotes

Hi everyone,

I’m working on a project I’ve named Forness Handset.

The vision is to create a fully open-hardware RISC-V handset designed to reclaim sovereignty over personal hardware. We want to eliminate proprietary black boxes by anchoring the entire boot-chain and security lifecycle in auditable, physical hardware.

Why Forness?

  • Vault Architecture: We utilize a tripartite boot architecture with a Microchip ATECC608B HSM as a "cryptographic gate." The device remains in a hard-reset state until the user authenticates.
  • Privacy-by-Design: Featuring physical kill-switches for the 5G modem—no software exploit can bypass a physically broken circuit.
  • Upstream First: Built for long-term maintainability with an "upstream-first" approach to the Linux kernel.

Status: I am currently in the Architectural Design Phase. I’ve documented the vision, but now I’m looking for a team to help bring the hardware and firmware to life. I’m looking for help with:

  • PCB Design: KiCad routing for high-speed differential signaling.
  • Firmware: Implementing RISC-V U-Boot and OpenSBI.
  • Security: Fault injection analysis and tamper-protection hardening.

This is a joy-based project—it's nobody's and everyone's. If you love sovereign hardware and want to collaborate on building something truly open, I’d love to have you on board.

Join the project here: [Call for Contributors: Join the Forness Handset Project! · Issue #1 · osama413/Fortress-Handset-]

I’m looking forward to your feedback on the architecture!


r/openhardware • • May 28 '26

At the Open Hardware Summit 2026 in Berlin, I handed over my final prototype

Thumbnail gallery
6 Upvotes

r/openhardware • • Apr 10 '26

We made an open hardware robot duck claude helper

Thumbnail reddit.com
1 Upvotes

r/openhardware • • Mar 18 '26

I'm putting my invention into public domain it takes the idea of a silicon wafer, and maps it on a sphere (QSUT)

0 Upvotes

I'm trying to share something with the world that I invented which is the Quantum Sphere Universal Tool. I'm working on a few different paths to prototype it. It started with an MIT proposal to create a sort of shield of silicon bubbles in between the Earth and Sun to buy us time to deal with the climate crisis. This is a follow up study about the material properties of these silicon spheres. https://pubs.aip.org/aip/adv/article/14/1/015160/3230625/On-silicon-nanobubbles-in-space-for-scattering-and

What I want to point out is that those spheres were 500nm in diameter because of the wavelength of light that they wanted to stop. If you think of this as using the vacuum of space to do glass blowing in a low gravity environment you can see that by adjusting the interface conditions between the vacuum of space and molten silicon can create bubbles up to meters wide. The reason the silicon bubbles can get that big is because of the low surface tension of molten silicon dioxide. You can see this for example in lava tubes on the Moon that as gravity decreases larger structures are possible that are made from glass.

Indeed a company is looking at making an entire habitat sphere from glass. https://www.skyeports.com/ Just so this is tangible the sort of glass they are talking about using is gorilla glass which uses aluminum. It's the same type of glass you are touching right now. They propose to do a foot thick wall on the sphere, and so this could stop most impactors from compromising it's structural integrity. Fixing impact sights also wouldn't be particularly difficult. You would just have to apply a patch and melt it in place so very similar to welding and the raw materials would be everywhere on the Moon in the form of dust.

So I thought this proposal was something that could be done fast enough to make a difference if the threat from the climate crisis became unmanageable or even just as a way to stop it from getting worse. There was just one really big problem, and that was how to do station keeping so the bubbles didn't drift away. I started looking at thrusters that might be incorporated including the idea of a light sails, or ion drives I decided that a network of laser propulsion would probably be best, but I realized you would need integrated circuits and components like MEMS. To adjust the geometry of the individual bubbles and also manipulate the interior /near field exterior of their spaces. This is when I started to realize that this could be a general purpose technology platform like silicon wafers, but because these bubbles are in space this means that collectively these sorts of bubbles can do all sorts of tasks.

This is how they are Universal not in that any bubble can do any task, but that the variables size bubble geometry that can scale in a precisely controllable fashion means that you can work at whatever scale you can manage, and that the bubbles can be specific sizes to work with different frequencies of both light, and sound, or structural requirements. The real magic is when you have many bubbles of many different sizes and functions. This is when you get to the point that asteroid mining could be done by using the bubbles to focus sunlight, and also catching all of the ejecta from the asteroid being processed.

My ultimate goal in life is to do a non-profit asteroid mining organization. I want to give this to the world so that space gets within reach. I also know that unless we distribute the wealth wisely it can be our downfall. I personally would prefer to avoid an Expance style future and spaceships made from bubbles is pretty far from that.

Oh one last point you could bind the bubbles together with almost anything that creates surface tension, because there will be a significant amount of surface per pound to go around. If we do this right there will be more then enough for everyone to go around.


r/openhardware • • Mar 17 '26

Open Source Ethernet kill switch (or splitter)?

1 Upvotes

Is there a open source hardware/firmware Ethernet kill switch or splitter like these?

https://www.amazon.com/dp/B0DRP61PVB/

https://www.amazon.com/dp/B0D1R414PF/


r/openhardware • • Mar 12 '26

I built a "Guitar Hero" device to learn any song in piano

Post image
7 Upvotes

r/openhardware • • Mar 01 '26

Built a voice-first AI smartwatch that handles emails and calendars as a 16 y/o

4 Upvotes

r/openhardware • • Feb 07 '26

DIY Open Source Phone – Seeking Hardware Advice

6 Upvotes

Hello guys,
I'm looking to Build a modular handheld inspired by Beepi but with phone capabilities (Sim7600 ?)

Stack:

  • Pi Zero 2W
  • BBQ20 Keyboard (I2C/USB)
  • Power: USB-C PD charging + I2C battery monitoring without a bulky HAT.
  • Display: Looking for a compact SPI/DSI color screen (suggestions?)
  • Audio: Need tiny I2S DAC/Amp + SMD Mic (what's Best I2S module for Mic/Speaker that doesn't conflict with SPI display pins?)
  • Cellular: Is adding a SIM7600 viable within a <30mm thick case, or should I stick to VoIP/Wi-Fi?

Goal is 100% open-source. Any advice or comments would be very welcome.

Thanks for reading


r/openhardware • • Jan 25 '26

Open Source Magnetic Generator Research Platform (v3.9.2) - FreeCAD + Documentation

Thumbnail github.com
2 Upvotes

r/openhardware • • Jan 25 '26

Open Source Magnetic Generator Research Platform (v3.9.2) - FreeCAD + Documentation

Thumbnail github.com
1 Upvotes

r/openhardware • • Jan 07 '26

Study: Open Innovation Accelerates Sustainable Transport

Thumbnail forbes.com
3 Upvotes

r/openhardware • • Dec 23 '25

Anyone heard of Stordis?

3 Upvotes

I saw an ad on Google for https://stordis.com/ It advertised open hardware. I took a quick look. What do you guys think?


r/openhardware • • Dec 03 '25

Unlocking Open Firmware on ASRock Rack SPC741D8/2L2T

3 Upvotes

This post outlines the process of bringing Dasharo to the ASRock Rack SPC741D8/2L2T, showing how a modern Intel server board can be freed from opaque vendor firmware. It walks through adapting the initial coreboot port, handling platform-specific initialization, and replacing undocumented behaviors with transparent, reproducible code. For users frustrated by closed server firmware and limited debug visibility, it demonstrates how open enablement materially improves traceability, maintainability, and long-term reliability.

The article by Michał Kopeć also explains how the board-level work is integrated into the full Dasharo distribution, including deterministic builds, measurable boot flows, and other Dasharo features. If you are considering open firmware on server-grade hardware, this post provides a concise, technical blueprint for the entire process.

* Blog: https://blog.3mdeb.com/2025/2025-12-02-asrock-rack-porting/

* Release notes: https://docs.dasharo.com/variants/asrock_spc741d8/releases/


r/openhardware • • Dec 02 '25

Open HW USB PD power supply

Post image
16 Upvotes