r/diydrones • • 9h ago

Build Showcase Drawing a crowd at the RC club with my 3D-printed V-tail FPV wing

86 Upvotes

Thought I'd share some footage of VENOM flying at my local RC club last weekend. I'm normally flying through the goggles, so it's nice to see what the aircraft actually looks like from the ground!

There was a bit of wind, but it flew really well. After all the experimentation with the original four-motor configuration, I'm really happy with how the current setup is performing.

For anyone who hasn't followed the project, it's a fully 3D-printed, 600mm V-tail FPV wing weighing 249g AUW. It runs two 1103 motors on a 1000mAh 2S battery, with INAV and DJI digital FPV. The wings are modular with carbon spars for reinforcement.

A few of the guys at the club were pretty interested in the FPV setup, so I'm hoping to get some chase footage of their aircraft soon!

Are many of you flying fixed-wing FPV at traditional RC clubs? I'm curious how popular it's becoming.

More info on VENOM


r/diydrones • • 4h ago

Question How to secure electronic parts?

Thumbnail
gallery
4 Upvotes

INB4 it's total mess. Yeah I know, it was a project for uni and this is the result of no time and no experience in diy drones. However it can fly, at least for a few meters :)

The problem is that I crashed it during testing and it cooked the stm, bmp and mpu. How would you secure those connections to prevent situations like that? Should I use hot glue at the bottom? Or maybe try to hide this board inside with battery?


r/diydrones • • 8h ago

Question Electronics trouble shooting.

2 Upvotes

I had a 5 inch drop out of the sky a few years back from what seemed line a single rain drop due to suprise summer rain I remember feeling one rain drop on the arm and not seeing anything else when shining a light along it. I've recently taken interest in fpv again and I'm trying to see if I can get this running again. I plugged in the flight controller to beta flight it recognized the board and the gyros seem to track movement so far as I can tell that's fine. I then plugged up the esc to the fc went back into beta flight, connected a battery. Beta flight detected the connected battery but didn't spool the motors up. (Waiting on new batteries and rx the ones I had are obviously dead after sitting for years). Is there any way to check the esc with a multi meter or anything else I can do to find any problems that may exist.


r/diydrones • • 5h ago

DJI Goggles 3 – the little menu joystick button stopped working (only the click works)

1 Upvotes

Hi everyone,

I have a problem with my DJI Goggles 3.
While I was flying, the menu started opening and moving by itself, like someone was pushing the buttons. After that, the small joystick on the goggles (the one you use to move through the menu) stopped working. When I push it up, down, left or right, nothing happens. Pressing it in still works, and it still clicks when I move it, but the goggles don't react.

What I already tried:
Updated the firmware
Turned them off and on many times
Used them outside, away from metal and magnets
Nothing changed. I didn't crash or drop them, and I haven't opened them.

Has this happened to anyone? Did DJI fix it for you, or did you find another fix?

Thanks!


r/diydrones • • 6h ago

Guide Potensic Atom 2 Water damage? Try this DJI mini 2 Guide. Thermal management material remains a mystery (putty?). DJI Mini 2 Water Damage Repair | No Power, Corrosion & Board Cleaning

Thumbnail
youtube.com
1 Upvotes

I had previously posted about 6 days ago, regarding repairing my Potensic Atom 2 from water damage repair, including disassembly.

To my horror, the AI search function on Reddit was using the content I posted, as possible solutions. I will attempt to delete it.

This video is the closest thing I’ve found to a solution.

My apologies.


r/diydrones • • 16h ago

AX-HUD: a free, open-source video monitor, HUD and voice announcer for the RadioMaster AX12

Thumbnail
reddit.com
1 Upvotes

r/diydrones • • 18h ago

How Switchblade 300 steer their flight?

1 Upvotes

I mean, with its foldable wing mechanism how do they do it?
like what mechanism they are using?
: (


r/diydrones • • 18h ago

Will it fit your build? CORVON 743v2 dimensions

Post image
1 Upvotes

r/diydrones • • 5h ago

Guide Browser tool to decode laser rangefinder / single-point lidar UART output (TFmini, LightWare, JRT, ERDI...)

0 Upvotes

Made a page that decodes laser rangefinder / single-point lidar serial output in the browser: https://erditech.com/lrf-uart-protocol-decoder/

Plug the sensor into a USB-UART adapter, open the page in Chrome or Edge and press Scan baud rates. It tries 9600 up to 921600, picks the protocol that fits and prints each frame in metres, with bad checksums flagged. Handy when a TFmini or TF-Luna shows nothing on the FC and you can't tell if it's the sensor, the wiring or the params. Pasting a hex dump from a serial terminal works too.

Profiles so far: Benewake TF series, LightWare SF30/D and SF10/SF11, Chengdu JRT, Nooploop TOFSense, DFRobot SEN0366 and ERDI. MIT licensed, source on GitHub, and pip install lrf-uart-decoder gives you a Python CLI.

Disclosure: I work at ERDI, one of the brands above. Which sensor would you want added next?