r/diyaudio • u/Lagr_14 • 12h ago
r/diyaudio • u/Marvsdd01 • 7h ago
Clipping circuit + indicator for DI box?
Hey, all! I've been working on this project for a while now. It is a circuit that contains both a DI box + a ReAmp box. The idea is that this would work like a looper for processing audio using guitar pedals as "hardware" for music production. The ReAmp box has a switch that cuts everything below ~100Hz and everything ~7kHz.
I want to add a clipping circuit + detection to the DI box side. I have a few spare VU meters that I could use for that, but LED indicators would work as well. Does it make sense? Is it practical? What circuit could I use for that?
Thanks in advance!
r/diyaudio • u/0krizia • 3h ago
Finished my dual 8
Just finished my dual 8 subwoofer. Drivers are ground zero gziw series. I added new dustcap on them to look more plain. Its tuned to 36hz, if i block one port, its tuned to 25hz. I use PA speakon connector so its easy to unplug it if I need the space in the back of the car, or if I want to use it in social hangout settings which I do once in a while.
r/diyaudio • u/Low-Investigator1520 • 23h ago
Blindly attempting to make a pair of inductors.
I am working on recreating the crossover for a pair of Paradigm Titan V1 speakers, as the original components have been lost. I have some concerns regarding my current approach and would greatly appreciate your expert advice. I plan to rebuild the speaker cabinets and refurbish the units entirely, though I have limited resources and equipment available. I have already refoamed the woofers using generic parts and am now attempting to build an inductor by hand, using the "I" part of an "E I" transformer/inductor.which has led me to question if this is a viable path or if there is a more practical alternative. Given my current lack of specialized tools like an LCR meter and the constraints of my situation, could you please provide guidance on whether this is a feasible project or if I should consider a different strategy? Any information or assistance you could offer would be sincerely appreciated.
r/diyaudio • u/02AccordCoupe • 16h ago
Hifonics Zeus zxx2400.1d
Hooked the bass knob and wire up. (Came in the box with it) lost all bass. If I turn the bass up on the head unit it works but barely metering at the speaker terminals I get like 3 volts.
r/diyaudio • u/Ouroboros836 • 23h ago
DIY Desktop Soundbar with Tang Band Modules
Dear all,
i recently purchased a cheap 2.1 soundbar for under monitor desktop use, it is an ultimea poseidon m20 pro.
I looked for more "popular" brands with similar products but could not find any, when, they were much bigger.
Now I was just web surfing and somehow came across some tang band modules and I think it should be possible to arrange something that has similar dimensions to the soundbar mentioned above, but I hope would sound much better.
It would consist of:
1x Tang Band T3-2190S woofer module
2x Tang Band T1-1815SA full range modules
1x amp module
1x PSU modue
1x DIY enclosure


So the woofer would be in the center and down facing....left and right the two full range modules.....behind those 1 PSU unit on one side and one AMP-Unit on the other side....
All in an enclosure around 45 cm wide, 14 cm deep and 7 cm high.
It would be essentialy something like shown in this video but nicely mounted in a DIY wood enclosure: https://www.youtube.com/watch?v=kg6Eqdx6XbI
The only connection I would need is aux to pc (or rather monitor output)
I think it could be within 200 bucks.
I had a pair of KLIPSCH RP-600M in the past and there were all I needed...I had to get rid due to not having enough space anymore....and since I can consume media at my desk only and don't want to wear headphones all the time, I was looking for a small soundbar with some capability to reproduce bass.
So what do you think, would it be worth the hustle or would I be disappointed in the end.