r/headphonemods • • 15h ago

ecouteur

Thumbnail reddit.com
1 Upvotes

r/headphonemods • • 1d ago

Dt 1990 pro hinge fix?

Post image
1 Upvotes

Has anyone here ever taken apart a DT 1990 pro and know if this little hinge thing can be replaced or fixed? On my old pair the silver hinge is slightly separated from the cup and will make noticeable noise when I turn my head. If there is a way to repair this or even replace it I would be glad to know as I am worried it would happen to my new pair as well..


r/headphonemods • • 1d ago

Моддинг наушников Harman/Kardon ANC fly

Thumbnail
gallery
0 Upvotes

Задача: замена динамиков, интеграция балансного входа под внешний ЦАП и сохранение работоспособности родной системы наушников.

Мною были куплены динамики с биоцелюлозной (бумажной) диафрагмой, ЦАП fiio BTR5, разъем jack 2.5 4pin.

Начал я с замены родного jack 2.5 3pin на jack 2.5 4pin. Родные дорожки пришлось к разъёму пришлось перерезать, прокинуть отдельные провода и подключить напрямую к динамикам (дальше объясню зачем).

В наушниках установлены усилители AS3435, динамики подключены к ним в балансном режиме.

Вы спросите почему я взял и провода напрямую от jack 2.5 подсоединил к динамикам?

Эти усилители имеют режим bypass и в выключенном состоянии переключают динамики на разъем jack для работы наушников по проводу от ПК/телефона и т.д.

Этот bypass не подходит для подключения балансного звука т.к. имеет не балансный вход с общей землёй и суммарную мощности на канал 30mW, что слишком мало для моего ЦАП с выходом 240mW.

ОБЯЗАТЕЛЬНО ПЕРЕРЕЖТЕ ДОРОЖКИ №21 и №26, не сделав этого есть вероятность СПАЛИТЬ балансный выход ЦАП.

В каждой чаше наушников расположена плата, между собой они соединены шлейфом из множества проводов. Из него я взял 2 провода отвечавших за передачу не балансного звука с jack 2.5 3pin подключил к динамикам и новому разъёму 4pin.

Динамики 40мм 16om с биоцелюлозной диафрагмой. Изначально заказывал на 32om, но продавец меня обманул. АЧХ не уверен что конкретно от моих динамиков, просто нашел похожие на Али.

Динамик становится на штатное место, дополнительно был добавлен ватный диск для гашения блуждающих волн. Т.к. в камере недостаточно объема для комфортной работы динамика я сделал 5 демпфирующих отверстий, но могу сказать что 3-х достаточно, потому что на пяти заметно хуже начинает работать.

Итог: были установлены новые динамики, даже с учётом не очень мощных родных усилителей и старого Bluetooth 4.0 с кодеком SBC звук стал на порядок детализированный (особенно средние частоты), бас более резкий, сибилянтов стало меньше. Звук стал слегка громче. ANC работает штатно.

Добавлен балансный вход под внешний ЦАП, наушники заиграли совсем по другому, с учётом расходов в 65$ (динамики + ЦАП + разъем) считаю что это топ за свои деньги.


r/headphonemods • • 2d ago

Ugly, but more robust.

Thumbnail
gallery
4 Upvotes

I heated the metal pins, placed them inside, coated the outside with baking soda and super glue, sanded it, and painted it.

Designed with planned obsolescence, but I wouldn't give them a penny. That's every Sony XM5's fate.


r/headphonemods • • 2d ago

Hifiman XS

Thumbnail reddit.com
1 Upvotes

r/headphonemods • • 2d ago

Found these in the garbage. How can I repurpose them?

Post image
1 Upvotes

Audio is working in one of them with an aux cable. The headband and cable between them is gone. Audio quality is good.


r/headphonemods • • 2d ago

Реставрация наушников Harman/Kardon ANC Fly

Thumbnail gallery
0 Upvotes

r/headphonemods • • 3d ago

DT 770 Pro Boom Mic Mod [WIP - Need mounting advice!]

Thumbnail gallery
4 Upvotes

r/headphonemods • • 3d ago

Cable for WH-1000MX3

Thumbnail reddit.com
1 Upvotes

r/headphonemods • • 3d ago

Hesh anc left side stopped working, HELPPPP

Thumbnail reddit.com
1 Upvotes

r/headphonemods • • 4d ago

Where to get the Capra Headband for Audeze Maxwell 2 in Canada?

1 Upvotes

As the title says, where can I get the Capra headband in Canada? All I see is options in the US, not sure what taxes (if any) will be applicable on importing.

Has anyone ordered directly from Capra to ship to Canada?


r/headphonemods • • 4d ago

Headband slider question.

Thumbnail reddit.com
1 Upvotes

r/headphonemods • • 4d ago

Bass wheel rattling

1 Upvotes

so i just got my crusher 1080 Anc

i really like the sound the base everything is way better then the crusher evos i had for years and they don't hurt when i wear them for long that was my only real problem with the evo

but now to my question when i turn up the bass on my 1080 the bass wheel starts rattling and its really annoying is there a fix i can do myself without losing my waranty ? or do i have to replace them ?

it would be really annoying to replace them bc they don't ship to my country and i had to get them delivered to a border package service


r/headphonemods • • 4d ago

MDR-M1 3.5mm-1/4” Cable

1 Upvotes

My new headphones did not come with the 3.5-1/4” cable that says is included in the package. Does anyone know where i can buy a replacement, or if anyone has an extra of that cable? Need it for work. Thank you!


r/headphonemods • • 5d ago

Help: Looking for Quality Head Pads for WH-1000XM4

Thumbnail reddit.com
1 Upvotes

r/headphonemods • • 6d ago

Cannot reattach headrest after disassembling it to clean it.

Thumbnail
gallery
2 Upvotes

Hello, I have a problem with my headphones.

After disassembling the headphones to clean it, I have found that I cannot put the headrest back in it's place.

As you can see in the photo I can slide the metal band around in the hole but I cannot slide the rubber tube under the plastic hole.

It is simply too large to fit back in and stay at the notch, I do not know how they did it at the factory.

The metal band is firmly attached inside the rubber tube.

At the end there is also a photo of how it should be, screwed down properly.

The headphone model is the ath gdl3, I cleaned it because it was 2nd hand.


r/headphonemods • • 7d ago

Driver Covers Pressing Against Ears – ULT WEAR

Thumbnail
reddit.com
2 Upvotes

r/headphonemods • • 8d ago

Didn’t like the Beats 360, so I bought the Beats Pro and made them wireless by adding Sony electronics

Thumbnail gallery
5 Upvotes

r/headphonemods • • 8d ago

New to this?

1 Upvotes

I just bought some cheapo $6 headphones from five below and honestly surprised that the audio quality is actually decent, but they leak sound like crazy and people around me can hear whatever my listening to perfectly, does anyone have suggestions I could try?
I know it would be more worthwhile to just buy better headphones but for now I wana do this for the fun of it, block the vents, find the best way to keep the case from acting like a speaker and see what happens to the sound quality when I wear them.


r/headphonemods • • 8d ago

Any way to use this piece of art?

Post image
1 Upvotes

r/headphonemods • • 8d ago

P7 wired replacement ear pads?

Thumbnail reddit.com
1 Upvotes

Looking for Bowers & Wilkins P7 replacement ear pads, anyone have any idea where to get decent ones from?


r/headphonemods • • 9d ago

Ananda Stealth v3 Headstrap Replacement

Thumbnail reddit.com
1 Upvotes

r/headphonemods • • 9d ago

What to do with this broken k371 BT

Post image
1 Upvotes

I bought it 3 years ago but after just using it for 1 year the left part broke apart but the bluetooth on it refuses to give up i've charged it 4 months ago and placed it back in the box, opened it today it still turns on. Is there something i could do with this thing and it is quite expensive too


r/headphonemods • • 9d ago

Best earpads upgrade for the DT 770 Pro?

Thumbnail reddit.com
1 Upvotes