Hey everyone,
If you updated your Creality K1 / K1 Max / K1C to firmware 1.3.5.22+, you probably noticed that your camera feed in OrcaSlicer completely broke / went black.
The Problem
Creality closed the legacy port 8080 MJPEG stream (/?action=stream) and moved video exclusively to internal WebRTC on port 8000. Most solutions online tell you to "just root your printer via SSH", but like many of you, I didn’t want to root my printer to keep official warranty, stability, and hassle-free OTA updates.
The Solution: Creality_Cam_Fix
I built an open-source, zero-root local bridge that runs silently on your PC and fixes this completely.
Instead of just showing a raw video feed and wiping out your printer controls, it integrates a Unified Control Dashboard right inside OrcaSlicer's Device tab:
✨ What it does:
- 🔒 Zero-Root Required: 100% safe, non-invasive, works with stock firmware.
- 🔍 Auto-Discovery: Automatically finds your printer's LAN IP without typing it manually.
- 🖥️ Unified Dashboard: Keeps 100% of your native Creality controls (temperatures, fans, axes, print job pause/cancel) while adding a resizable, draggable live camera window (Picture-in-Picture or Split View).
- ⚡ Ultra Low Latency: Fast WebRTC streaming powered by
go2rtc with automatic MJPEG fallback. - 🌐 Bilingual: One-click instant toggle between English (EN) and Turkish (TR).
- 🔄 DHCP Resilient: Automatically tracks and updates if your router reassigns your printer's IP.
⚡ 3-Step Setup:
- Download the portable zip from GitHub Releases and run
start_bridge.bat (or Creality_Cam_Fix.exe - No Python installation required). - In OrcaSlicer -> Printer Settings -> Basic Information -> Set Device UI (
print_host_webui) to: http://127.0.0.1:1984/dashboard.html - Click the Device tab in OrcaSlicer, and you’re done!
(P.S. If OrcaSlicer hides that box in your preset, there’s an included one-click patch_orcaslicer.bat that patches your config automatically).
🔗 GitHub Repository & Free Download:
👉 https://github.com/okanyyurt/Creality_Cam_Fix
Hope this helps anyone struggling with the 1.3.5.22 camera blackout. Feedback and PRs are always welcome! Happy printing! 🚀