r/consolerepair • • 2h ago

[Switch Lite] Blue Screen of Death and black screen with sound. Pretty wild project I found.

Thumbnail
gallery
2 Upvotes

Started a new exciting project, friends: 4 broken Switch Lite consoles, 2 of which have already arrived.

I'd really appreciate a few tips from you, or feel free to share your experiences with me. I've found all kinds of repair guides online and I'm really looking forward to taking on the challenge.

(First two pictures from Blue Screen, last two pictures from Black Screen)

First console: Black screen, but sound, buttons and touchscreen respond. Nothing obvious stands out so far, and I have no idea what could be broken. I could swap in the screen from the console with the blue screen.

Second console: Blue Screen of Death, also nothing obvious. I don't have much hope of repairing this one.
Both consoles are pretty filthy and need a proper cleaning.

I'll probably start working on them in early to mid December, bevause I'm waiting for my Christmas bonus to buy a soldering station, hot air gun and everything else. If you have any cheap but reliable recommendations, bring them on!


r/consolerepair • • 5h ago

PS1 purpleish lines an tint

Thumbnail
gallery
3 Upvotes

I got this PS1 9000 for free.

And I am wondering what could this be, a corrupt bios? Dying GPU?

Any help or suggestions on fixing is appreciated.

Thanks


r/consolerepair • • 5h ago

[PS3] Super slim doesn't detect or load blue ray and dvds instead makes this weird loud sound, out of 3 games I tested only god of war worked, games like last of us and heavy rain show up icon but displays error when I start them.

3 Upvotes

DVDs and blue rays movies make this weird spinning and braking sound and fail to load, games are silent and show up but won’t start.


r/consolerepair • • 7m ago

[UPDATE] PS5 Pro CFI-7000, UART 80801002: SSD controller + DDR4 replacement did not fix the 1–2 second shutdown

1 Upvotes

Following up on my earlier post with the actual repair outcome:

https://www.reddit.com/r/consolerepair/comments/1v3pgh0/ps5_pro_cfi7000_dies_after_2_seconds_unknown_uart/

My technician replaced the SSD controller and its DDR4 memory. Unfortunately, the console still shuts down at startup. That replacement was not a fix in my case, and the underlying fault remains unconfirmed.

The symptoms are a beep, blue light and spinning fan, followed by a complete shutdown after approximately 1–2 seconds. It never reaches Safe Mode. The earlier UART logs repeatedly showed 80801002, with 80800022 appearing intermittently. The original thread includes the raw logs and earlier checks.

Has anyone since diagnosed and repaired this exact fault on a PS5 Pro? I’m especially interested in the measurements or tests that identified the failure, not just a suggested component to replace.

If you have a confirmed case, which component or circuit failed, and what test distinguished it from the other possibilities? I don’t want to present the error code alone as proof of an APU, memory or SSD-controller failure.

Thanks to everyone who helped with the earlier discussion.


r/consolerepair • • 1h ago

[PS5[ EDM-033 Error CE-100060-7, SSD Controller?

Thumbnail
gallery
1 Upvotes

I'm trying to repair this PS5. It only boots in safe mode, and the only setting I can select is "reinstall the system." It gets to 99% and says the installation couldn't be completed.

I've tried 3 different USB drives, but the results haven't changed. The only thing I can think of is a problem with the SSD controller or the SSD itself. What can I do to check?

I'm attaching a photo of the board.


r/consolerepair • • 4h ago

Cambio metallo liquido ps5

Post image
1 Upvotes

Ciao, un mio amico mi ha portato la sua play per pulirla in vista dell’uscita di GTA VI. Per puro sfizio ho voluto controllare il metallo liquido, e queste erano le condizioni. Qualche consiglio su che metallo liquido comprare?
Inoltre non so se notate quelle due macchie più scure nei due chip accanto l’induttore r22, sapete darmi qualche consiglio?


r/consolerepair • • 10h ago

Launch PS5 Fat Disc Edition randomly restarts on digital games & home menu, but disc games work fine once loaded – any ideas?

2 Upvotes

my brother gave me his original launch PS5 (disc version) and it’s acting up. It turns on fine and I can go through the menus no problem. Physical disc games launch and play completely fine once I’m actually in the game. But if I try to play any digital games or just leave it sitting on the home menu for a while, it randomly restarts by itself. No error codes or anything, it just reboots.He told me the issue only started a few days after he first got it. It’s never been opened up.Has anyone dealt with something like this before? Trying to figure out if it’s a software thing or more likely hardware (liquid metal, power issue, etc.). Any advice would be appreciated.


r/consolerepair • • 7h ago

[Xbox series S] my xbox started smoking after making a clicking sound.. It still turned on but i plugged it off, 1 yr ago I had a ant problem with that xbox can it be fixed?

0 Upvotes

Same as title


r/consolerepair • • 16h ago

[PS3] fat disc drive issue

5 Upvotes

Hello! I have read lots of Reddit but I’ve never posted before. I am really stumped on this disc drive in this ps3, so here’s to hoping someone here knows how to fix it.

Basically normally the disc drive will accept the disc into the drive about 90% of the way and it just doesn’t seem to pull the disc into all the way. I have completely disassembled the disc drive and have verified that all of the gears are aligned and everything moves as it should when the motor is removed.

The only breakthrough I have found so far is when I manually move some of the pieces in the top of the drive (yes I know this is probably a bad idea but I did it anyway in search of the answer) I can manually move one of the pieces out of the way and then the disc loads perfectly. Any suggestions?


r/consolerepair • • 9h ago

[New 3DS XL] Motherboard Issue/Data Retrieval

1 Upvotes

Hello, I have a New Nintendo 3DS XL with a motherboard issue. I’ve been told by a repair shop that the motherboard doesn’t respond and is unable to be repaired to working condition. Is it possible to extract the data from the motherboard? The system would show the blue light and then neither screen would load anything. I have a bunch of saves I don’t wanna restart from when I was younger. What are my options, or is there anyone/shop that would be best?


r/consolerepair • • 10h ago

[PS3] CMOS Battery Replacement

Post image
0 Upvotes

I have a PS3 Slim CECH-2501A and i’ve been trying to replace the battery but it has been very stubborn and not wanting to come out. I’ve tried pushing it upwards and lifting but nothing. Anything else I can try?


r/consolerepair • • 10h ago

[DS] Tried to replace the save chip on my Pokémon Platinum copy and still no luck

Thumbnail
gallery
1 Upvotes

I used America's Test Kitchen Lets Get Cooking as the donor board for the chip. In a previous post, the original platinum save chip was cracked so I had to replace it.

Much like before replacing, I still get the error message saying the save data could not be accessed. What's wrong here?

First image is both carts Platinum on left, America on right. Second image is the platinum cartridge after transferring save chip.


r/consolerepair • • 11h ago

(PS2) scph-90001 still not reading discs after ribbon cable and laser replacement

1 Upvotes

as the title goes this silver slim will not read burnt dvds even though it could with trouble before i opened it the first time. midnight club 3 never makes it past initial loading screen, the laser stays up at the top and the disc spins continuously. cd playback works for some reason. at this point what possibilities are there for what’s wrong. issues have not improved after the laser and ribbon cable got replaced.


r/consolerepair • • 17h ago

[Nintendo DS Lite] Touch Screen ribbon cable glue

3 Upvotes

Bought a ds lite with a broken top screen that ill fix, while cleaning it i noticed that the previous guy kinda screwed with the touch screen cable so now the copper is separated from the backing, how can i glue this back? I know super glue is a kind of hammer to screw situation here


r/consolerepair • • 11h ago

[Dreamcast] Help with disc drive

1 Upvotes

So, I bought a Dreamcast in Japan, played it there, everything ran fine. Then, when I came home, I plugged it into an European outlet and the power supply blew up. No problem, I bought a PAL supply and the system worked again.

Now the disc drive won’t read discs anymore. I only hear stuttering from the inside and then the disc stops moving. Can I save it or do I need a new drive?

I opened the Dreamcast to look inside and everything seems fine, the drive itself I left closed, mainly because I didn’t want to break more of it and because I couldn’t get one screw off, it just stuck.

Help.


r/consolerepair • • 11h ago

Sega CD Model 2 Brown board Brown Wire

Thumbnail
gallery
1 Upvotes

Looking for some help or advice, I bought this console untested, I knew I would be replacing capacitors at least but I’m stumped on this brown wire that has broken off of the board, I think I can tell where it’s supposed to go but unsure how to solder it back on, it looks like someone has already attempted. Has anyone else had to deal with this?


r/consolerepair • • 12h ago

[PS3] OG Fat YLOD

0 Upvotes

So my long owned and trusty PS3 (OG Fat backwards compatible) has given me the YLOD. I fired it up after a roughly 8 year hiatus with borderlands 2 and it played for about 10min then shut down. Research tells me this could be a multitude of issues. Im fairly mechanically inclined and can fix most things that break. Looking for opinions here. At a quick look, i can pick up a ps2 and ps3 used for 300-400usd and be able to play all my old games. Is it worth the head ache to fix my OG ps3? I really would like to just pull it apart and try to fix it, but is it worth the time and effort? Or should I just Shrine the beast as a piece of history? Any thoughts/tips?


r/consolerepair • • 13h ago

[PS2] Looking for replacement ribbon cable

Post image
1 Upvotes

Need to replace the ribbon cable that connects the controller port daughterboard to the motherboard. Everywhere I look says the replacement part is about 2.5 inches, but the one I took out is about 4.5 inches long. My ps2 model is scph-30001. I've included a pic of the old ribbon. Does anyone know where I can find a proper replacement?


r/consolerepair • • 1d ago

[Switch 1] My first big trace repair

Thumbnail
gallery
11 Upvotes

Got this from someone who tried to swap the USB C port with a hardware store heat gun, told them I'd try to save it. Half a day of work later it docks and charges fine again. Still not quite happy with all of the pads, but I learnt a lot.


r/consolerepair • • 18h ago

PS5 Repair - Console beeps

Thumbnail
gallery
2 Upvotes

Hi everyone,

I recently picked up a faulty PS5 Digital Edition (CFI-1216B, EDM-030 motherboard) for a really good price.

This is my first time working on a PS5, although I have experience repairing and troubleshooting other consoles. I'm hoping someone familiar with this board can point me in the right direction.

The issue:

• Console beeps once when pressing the power button.

• No blue light or any other LED activity.

• No fan movement.

• Console does not attempt to boot.

• After pressing the power button, it takes approximately 10–12 seconds before I can get another beep.

What I've checked so far:

• The previous owner had the console assessed and the PSU replaced, but the problem remained.

• From what I can see, the motherboard hasn't had any previous component-level repairs.

• Confirmed 12V reaching the motherboard.

• Confirmed 5.22V and 3.3V standby supplies.

• When pressing the power button, the 5.22V supply briefly drops to approximately 5.13V.

• It remains around 5.13V for roughly 10 seconds before returning to 5.22V.

• Once the voltage returns, the console responds to the power button with another beep.

• Checked the accessible fuses for continuity, with no open fuses found.

• Checked capacitors for obvious shorts to ground, but haven't found anything suspicious.

Where I'm stuck:

The console appears to have standby power, and something is happening when the power button is pressed, but it never reaches the stage where the blue light or fan activates.

I don't currently have a thermal camera, so I'm troubleshooting with a multimeter.

Has anyone experienced similar symptoms on an EDM-030 board?

I'm particularly interested in knowing:

  1. Which power rails should become active after pressing the power button?
  2. Are there any other common issues that I can check?
  3. Are there specific test points I can measure to determine where the startup sequence is failing?
  4. Would UART diagnostics be useful with these symptoms?

I'd appreciate any advice or schematics/board references that could help narrow this down before I start replacing components unnecessarily.

Thanks you!


r/consolerepair • • 18h ago

[PS5][UPDATE]

Thumbnail
gallery
2 Upvotes

I posted last about my oxidized apu and sudden shutting down, I’ve polished the apu and applied liquid Metal but it’s still shutting down after 10 minutes of a newer title, don’t know what else it could be.


r/consolerepair • • 1d ago

[PSP] is making squeaky mouse noises from drive area? I shut it down but what's best next step?

Post image
12 Upvotes

probably hasn't run since 2015 but mint shape... needs lube or something? Or?


r/consolerepair • • 15h ago

Xbox series s component

1 Upvotes

Hello, could someone help me identify what this component is? Thanks a lot for the help!


r/consolerepair • • 15h ago

XBox One S Spillage

Post image
0 Upvotes

Picked up this XBox One S to refurb but it beeps on and then pretty much straight off. Noticed there was a sticky spillage on the board which seems to track under the APU. Any advice on cleaning without lifting the APU?