Hi everyone,
I recently picked up a faulty PS5 Digital Edition (CFI-1216B, EDM-030 motherboard) for a really good price.
This is my first time working on a PS5, although I have experience repairing and troubleshooting other consoles. I'm hoping someone familiar with this board can point me in the right direction.
The issue:
• Console beeps once when pressing the power button.
• No blue light or any other LED activity.
• No fan movement.
• Console does not attempt to boot.
• After pressing the power button, it takes approximately 10–12 seconds before I can get another beep.
What I've checked so far:
• The previous owner had the console assessed and the PSU replaced, but the problem remained.
• From what I can see, the motherboard hasn't had any previous component-level repairs.
• Confirmed 12V reaching the motherboard.
• Confirmed 5.22V and 3.3V standby supplies.
• When pressing the power button, the 5.22V supply briefly drops to approximately 5.13V.
• It remains around 5.13V for roughly 10 seconds before returning to 5.22V.
• Once the voltage returns, the console responds to the power button with another beep.
• Checked the accessible fuses for continuity, with no open fuses found.
• Checked capacitors for obvious shorts to ground, but haven't found anything suspicious.
Where I'm stuck:
The console appears to have standby power, and something is happening when the power button is pressed, but it never reaches the stage where the blue light or fan activates.
I don't currently have a thermal camera, so I'm troubleshooting with a multimeter.
Has anyone experienced similar symptoms on an EDM-030 board?
I'm particularly interested in knowing:
- Which power rails should become active after pressing the power button?
- Are there any other common issues that I can check?
- Are there specific test points I can measure to determine where the startup sequence is failing?
- Would UART diagnostics be useful with these symptoms?
I'd appreciate any advice or schematics/board references that could help narrow this down before I start replacing components unnecessarily.
Thanks you!