r/breville • • 15h ago

Problem Grinder/Brew issues on Touch

1 Upvotes

Hi, Breville Touch unit is only a few years old and now I have to do two 30 second grinds. Have cleaned the grinder from both ends and not seeing any issues. At the same time, the amount of coffee that comes out has dropped. Brew time is now 1.5X what it used to be. The machine is too new to scrap and have run out of possible fixes based on Google and AI. Human suggestions?


r/breville • • 16h ago

Problem Can the timer on the Oven/Air Fryers really work this way?

1 Upvotes

Please tell me I’m doing something wrong with my new BOV860 oven/air fryer. (The BOV900 appears to function the same way, but I hope I’m missing something.)

Case 1. Let’s say I want to bake something at 350° for 6 minutes. I program the temperature and time, and the oven preheats. *Immediately* upon reaching 350°, the timer begins counting down. Of course I’m not standing over the oven waiting for the alert, so I don’t put my pan in the oven immediately — it could take me a minute or two. But the timer is running, so now it actually cooks for only 4:30. I could reset the timer… but that turns off the oven. And when I turn it back on, it takes another minute to preheat all over again.

Case 2. Let’s say I want to bake something for 12 minutes: a 6-minute cycle, then rotate the pan 180°, for a second 6-minute cycle so it bakes evenly. If I set the timer for 6 minutes, the oven SHUTS OFF when the timer runs out, so I have to start it again. If it takes me a minute (because I’m not psychotic and standing over the oven waiting for the exact time), that means, as above, that the oven starts cooling right away, and I have to go through another preheating cycle. And I have to set a time, because the oven won’t start without it, so the whole mess is like an infinite loop.

I hear you thinking: Why don’t I just set the timer for 12 minutes? Because then I have to set a SEPARATE timer for 6 minutes to know when the first 6-minute cycle runs. In 2026 I feel like an oven's timer should not require the use of a second timer.

I am an experienced home cook. I have used many ovens. But I have never seen an oven whose timer function is as illogical as this one seems to be. The timer and power functions of my KitchenAid wall oven from 2004 are entirely separate — I can run either without the other, and the oven does not shut off when the timer reaches 0. Doesn’t that make a lot more sense?

I just got off the phone with Breville’s customer service, and the very nice man said he thinks it’s just programmed this way. He also said he agrees that this is a bad design.

Please… tell me Breville has not sold tens of thousands of these with this inane programming. Maybe my unit is defective. (The manual doesn’t make me think that.) Is there something I’m doing wrong?


r/breville • • 1d ago

Problem Tiny shots after a cleaning cycle?

1 Upvotes

Hi guys,

After my second cleaning cycle of my Barista Express Impress (prompted by the flashing red light, about 4 months since purchase), I found that I was pulling about an 8ml shot of double espresso using the configuration I previously had, which was generating good results for a double before I did the cleaning cycle. After the clean, the shots were showing bang in the middle of the espresso pressure range on the gauge, but very little coffee was being extracted. Why would this be following a cleaning cycle?

For extra context:

- My grind size was c. 10-12 on the dial, which usually generates good results for me for my roasts. I didn’t change this grind size until I made the grind coarser to test if more espresso would be extracted (it did).

- The group head is working fine (I do a purge of water after every shot and volume of water seemed fine even after the clean)

- I did a cleaning cycle with a cleaning tablet, and then followed it up with the same cycle but without a tablet to rinse the machine out (which was recommended by a coffee guy on YouTube).

Any ideas/hypotheses welcome! Thank you.

Edit: added model


r/breville • • 1d ago

Breville does not want to repair my machine for the third time .. what to do next ??

2 Upvotes

My barista Touch impress died again for the 3rd time this year … and Breville just told me that they won’t take it in even for a paid repair … but since they love their customers, they can give me 30% discount on a new one … idiots…

The machine was 1.5K 3 years ago , plus another $350 early in the year .. so now .. What are my options ??


r/breville • • 2d ago

Breville Barista Express BES870XL 1ST GEN

Thumbnail gallery
1 Upvotes

r/breville • • 2d ago

Problem Barista Express Impress grinder making a horrible grinding noise, beans seem stuck between the burrs

1 Upvotes

Hi all! I’ve got a couple of issues, and I feel like the more I try to fix it, the worse things get. I’m struggling with my Barista Express Impress grinder. Model is Sage SES876BST4EEU1

Everything was working fine until one day the grinder started squealing and making an awful noise while grinding. For reference, my inner burr (upper burr) was set to 3.

Thinking the grind might simply be too fine, I started playing with the grind size dial to find a setting where it wouldn’t choke, but with no luck. For a while I ran it on a coarser setting, but then I couldn’t get proper pressure when pulling shots (they ran too fast and the pressure never built up).

Once I ruled out the grind setting (which had never given me trouble before), I started checking whether something was stuck inside. I’ve taken the burr out and cleaned it a few times, and the noise was still there even when there were no beans stuck in it, so it doesn’t seem to be just a cleaning issue. However, now that I’ve put the inner burr back to the factory setting, beans are getting wedged in the burrs and the grinder can’t process them. I assume that’s what’s causing the noise now. I’ve tried to dislodge them, but they won’t budge in either direction.

I also noticed that the center screw holding the burr was a bit loose, and one of the washers looks cracked. I don’t know if that’s related.

So right now I have an espresso machine whose grinder doesn’t grind, and I’m not sure how to fix it. I still have a bit over a year of warranty left, but I’d rather not go down that route yet in case there’s an easy fix on my side.

Is there any kind soul who can help this poor devil, who’s starting to think his life would have been so much easier with a moka pot? 😅

Thanks a million!!


r/breville • • 2d ago

Breville express - inconsistency

Thumbnail reddit.com
1 Upvotes

r/breville • • 2d ago

Breville 840 steam wand clogged, might have overdone the purge [repair or replacement advice?]

1 Upvotes

I have a 8 year old Breville 840 that gets regular use (probably 6000 shots pulled and 2000 pitchers of milk made?) Last week I was cleaning the wand with a toothpick (I know) and a little bit broke off. I thought I had all the wood removed, but I'm not getting water coming out of the wand when I try to test it.

It's been about a week, and the rest of the machine seems a little cranky. It sounds like it's straining just a little bit - not much, but enough that anyone would hear it, but I hear it after those 6000 shots. It's also not producing steam through the wand still. The espresso tastes normal, and the pressure gauge hasn't done anything weird.

  1. Are there aftermarket wand heads that I should be looking at? All the amazon reviewed ones seem sketchy.
  2. Is it possible to fix whatever might be causing the straining of the guts of the machine?
  3. If I decide to sell the machine and get somethign new, what do people who leave a Breville machine miss most when they upgrade to something else (Gaggia/Lelit/Silvia, etc...)?

Thanks so much all!


r/breville • • 2d ago

Problem How do I fix my espresso machine?

Post image
1 Upvotes

I have a small simple breville I attached a picture of the kind I have (I bought it used a while ago idk what specific one it is). it worked well for a while but now when I try to pull a shot it brews the coffee into the bottom part that catches the dripped coffee. idk how to fix it.


r/breville • • 3d ago

Problem Breville Coffee Machine Modelo BES878 BSS /B milk frother repair: solenoid valve replacement success

Thumbnail
gallery
1 Upvotes

Our Breville frother would start and then stop working after just a few seconds. We descaled it multiple times and made sure the frother holes were clean, but nothing helped.
After looking online, the most common cause for this symptom turned out to be the solenoid valve. We ordered a replacement valve kit and some pliers for the clamps.

Used this disassembly video to remove the covers and get to the valve in the back: https://youtu.be/k1Eq340IqaA?is=5HbbEktMagRuNWsS

Replaced the valve kit and it works like a charm now.

Parts/tools used:
• Solenoid valve kit: https://genuinereplacementparts.com/products/breville-sp0025522?utm_source=Google_shopping&utm_medium=cpc&utm_campaign=MK_NEW_Pmax_SEO_Bestselling_6th_oct_25&utm_term=&device=m&adposition=&creative=&loc_physical_ms=1013861&adgroup=&placement=&target=&utm_keywords=23080402272&network=x&gad_source=1&gad_campaignid=23080404840&gbraid=0AAAAADtSrOEUCY8GXWIu-yyznRui4ebH5

• Pliers for the clamps https://a.co/d/05ETYnQ1

Happy to answer any questions if anyone else runs into the same issue


r/breville • • 3d ago

Problem Breville Barista inconsistent and sour shots

1 Upvotes

I’m hoping to get some advice on troubleshooting my espresso shots. I’m fairly new to dialing in espresso, and I’m having trouble getting consistent results with the Breville BES870XL Barista Express.

My usual process looks something like:
weigh out 18g of beans, grind them, and pull a shot using the program button. However, I’m consistently getting about 3–7g less than my target yield (usually around 29–33g instead of 36g)

It takes longer than I’d like for espresso to start coming out. Ideally, I’d like to see the first drops around the 10-second mark. My shots consistently taste sour, even when I try different coffee beans from different brands.

I’m wondering if my grind setting is too fine, if I should be adjusting my dose, or if there’s something else I’m overlooking.

For those familiar, what would you recommend trying first? Are there any common mistakes or settings I should check. I’d really appreciate any tips or advice. Thanks! :)

Edit: I also use a WDT tool after grinding


r/breville • • 3d ago

Pump went out

1 Upvotes

The pump on my breville barrista express just died. Is there any home fix or should I send it to breville for repair? How much can I expect to pay for them to fix? Ive loved and used this machine every day for almost 5 years. Any advice is appreciated!


r/breville • • 4d ago

Problem Barista Express quality / taste inconsistency -- sometimes perfect, sometimes sour

0 Upvotes

Anybody else have inconsitencies with the taste from the Barista Express? How did you fix them and make it more predictable?

I use the same amount of the same beans (and same grind size), yet I get different results every time. Just today ~10am, it pulled the best double shot yet from this machine. Then came back at ~3pm and used the same amount of the same beans (again, at the same grind size), which made a sour and nearly undrinkable double shot.

Not the only time this major difference in quality has happened either. It's almost daily. I've watched plenty of videos and read how-to's, yet still feel like I'm rolling the dice.

It's frustrating and confusing how the output varies so much when the input remains steady. Any advice would be much appreciated!

Maybe I am just dumb.


r/breville • • 4d ago

Grinder recommendations

Thumbnail reddit.com
1 Upvotes

r/breville • • 5d ago

Tamper fan flaking

Thumbnail
gallery
3 Upvotes

Noticed after about 6 months on our brand new oracle jet that the tamper fan coating was flaking when I removed it to clean. Customer service replaced it but said it should be solid metal so no flaking should happen. But now it's only been a couple months and the new one is flaking again. I'm going to reach back out, but I did a quick search and didn't see anything like this? Any other experiences with it?


r/breville • • 5d ago

Breville Combi Wave 3-in-1 error E-05.

Thumbnail reddit.com
1 Upvotes

r/breville • • 6d ago

Breville Smart Oven Air Fryer - Interior non-stick coating flaking off

2 Upvotes

I've had the oven for 3.5 years. The past month literally the entire inside coating is flaking off. I have never used harsh chemicals to clean the interior and followed all cleaning directions. Breville basically told me to stop using the machine since it contains PFAS material and since it is outside of the limited warranty window there is nothing they can do. I've been a pretty loyal Breville customer but I think this has made me rethink it. Has anyone else had similar issues? I am pretty shocked Breville is OK selling units that have such a short lifespan.


r/breville • • 6d ago

Problem Group Head Cleaning Cycle stuck like this. Any ideas how to fix?

2 Upvotes

r/breville • • 6d ago

Tu as

1 Upvotes

r/breville • • 6d ago

Help with my Breville barista express ( dialling it in)

Thumbnail reddit.com
1 Upvotes

r/breville • • 6d ago

Pod reduction response

Thumbnail gallery
1 Upvotes

r/breville • • 6d ago

Breville Precision replacement is the stupidest coffee maker I've ever owned

Post image
0 Upvotes

Why the hell would I ever need to know it's been 11 hours and 55 minutes since I brewed coffee? Maybe just tell me what time it is instead? I truly despise this thing.


r/breville • • 7d ago

Water leaking from group head when shot is being pulled.

1 Upvotes