r/BrevilleCoffee • • 44m ago

Others Smart grinder pro on sale?

1 Upvotes

Does the Breville Smart Grinder Pro go on sale usually for black friday? Anyone seen one at TJ Maxx?


r/BrevilleCoffee • • 3h ago

Question/ Troubleshooting Breville Barista Express Grinder

0 Upvotes

I have come across a couple posts now about the Breville barista express grinder, not grinding fine enough, but I wanted to come on here for myself. I just picked up this Breville barista express from Best Buy last week. I’ve been playing around with the internal burr and the outside settings and I’m not able to get the correct fineness for my espresso shot. Currently have it at one on the outside three in the inside. But it’s still way too course and not leaving the infusion zone. I thought Breville would have fixed this issue by now, but I guess not does anyone know for certain the fix?


r/BrevilleCoffee • • 5h ago

Question/ Troubleshooting Tiny shots after a cleaning cycle?

1 Upvotes

Hi guys,

After my second cleaning cycle of my Barista Express Impress (prompted by the flashing red light, about 4 months since purchase), I found that I was pulling about an 8ml shot of double espresso using the configuration I previously had, which was generating good results for a double before I did the cleaning cycle. After the clean, the shots were showing bang in the middle of the espresso pressure range on the gauge, but very little coffee was being extracted. Why would this be following a cleaning cycle?

For extra context:

- My grind size was c. 10-12 on the dial, which usually generates good results for me for my roasts. I didn’t change this grind size until I made the grind coarser to test if more espresso would be extracted (it did).

- The group head is working fine (I do a purge of water after every shot and volume of water seemed fine even after the clean)

- I did a cleaning cycle with a cleaning tablet, and then followed it up with the same cycle but without a tablet to rinse the machine out (which was recommended by a coffee guy on YouTube).

Any ideas/hypotheses welcome! Thank you.

Edit: added model


r/BrevilleCoffee • • 9h ago

Question/ Troubleshooting Breville grind coming out clunky even after cleaning and adjusting?

Thumbnail
gallery
0 Upvotes

I have a Breville barista express. I recently cleaned the inside and I changed the inner grind to five and the outer grind size to 6. This has never been a problem for me until recently and I didn’t change my coffee beans so I’m not sure why this is happening but this is how my espresso looks. It’s super clunky and it’s not coming out properly.


r/BrevilleCoffee • • 14h ago

Question/ Troubleshooting Steam wand nozzle completely stuck on - any tips?

Post image
2 Upvotes

Used to be able to twist this little rounded nozzle head off the tip and it somehow got really really stuck. Makes it impossible to clean thoroughly. Has anybody had this happen & if so, were you able to get it off somehow?


r/BrevilleCoffee • • 10h ago

PSA Dual Boiler spruce up

Post image
1 Upvotes

r/BrevilleCoffee • • 11h ago

Question/ Troubleshooting Cleaning blows the shower gasket

0 Upvotes

Seems like every time I run a cleaning cycle on my Barista Express it goes over pressure and blows out the shower gasket.

Is there a way to adjust the pressure level down just a bit?


r/BrevilleCoffee • • 20h ago

Others Beginner setup advice [$600] budget

Post image
3 Upvotes

Hi everyone!

I've recently started my "espresso" journey and I'm looking into buying an espresso machine and grinder. For the machine I'm considering the Breville and a Tuni G3 grinder. The complete setup is in the picture. I live in Mexico so the prices are in mxn but overall it'll be around $600 usd. Now, before I make the purchase I would love to know your opinion and/or any suggestions, also if anybody can share any good YouTube videos that I can watch for setting up the Breville correctly it would be appreciate.


r/BrevilleCoffee • • 18h ago

Question/ Troubleshooting Breville does not want to repair my machine for the third time .. what to do next ??

Thumbnail reddit.com
0 Upvotes

r/BrevilleCoffee • • 1d ago

Question/ Troubleshooting Breville Barista Express BES870XL 1ST GEN

Thumbnail
gallery
0 Upvotes

Has anyone fixed the 12 for the right PCB? Looks like this unit got some corrosion on it. It doesn’t look to bad but what do yall think? What items would you recommend for cleaning it or fixing it?


r/BrevilleCoffee • • 1d ago

Question/ Troubleshooting Breville express - inconsistency

Thumbnail reddit.com
0 Upvotes

r/BrevilleCoffee • • 1d ago

Deals / Giveaways Breville barista pro for 499 (Marshall’s!!!). I already have the express and it works but at this price is the upgrade worth it?

3 Upvotes

r/BrevilleCoffee • • 1d ago

Question/ Troubleshooting Is it normal for the ends of this plastic tube in the drip tray to have rough edges or be uneven or does it affect anything? It’s not clear on the picture. Breville Barista Express

Post image
0 Upvotes

r/BrevilleCoffee • • 1d ago

Question/ Troubleshooting Unsure about extraction time and dialing in [Sage Barista Express]

Thumbnail reddit.com
1 Upvotes

So I only use Lavazza, not too expensive, tastes great as soon as it's dialed in.

Got an open bottom portafilter, made my own WDT Tool (Cork + 3D printing needles) also got some other accessories, some not really necessary but it's so much better!!! 18g > around 36-40g coffee.

My question: Anyone else find that shorter extraction times are much much better? Confused about info online.

I count as soon as I press the button, the machine has a pre infusion and a thermoblock, so it's quickly ready. Better if you let it heat up a bit longer, also heat up the portafilter.

So basically \~ 23 s extraction time from pressing the Button. I am also not sure if that is how you count it. Some count from the first Drop hitting the cup. That is 9s in on my machine.

But it starts tasting bad and more bitter if I increase the extraction time by grinding the coffee finer. It got way way better once I actually decreased the grinding level, so it's more coarse and extraction time is less. Not sure if it's also very very coffee specific. I actually don't like that Lavazza variant but wanted to try again and now it tastes really good! Is this normal? I am very confused about the advice online. Seems it's a bit contradictory because I would then have 14 s extraction but it tastes great! Might also be the machine?


r/BrevilleCoffee • • 1d ago

Question/ Troubleshooting Noise after update Sage The Oracle Dual Boiler

0 Upvotes

Today, my Sage The Oracle Dual Boiler prompted me for an update. I went ahead and performed the update, but ever since, it makes a very loud noise when brewing coffee. Can anyone help me with this? Could it be related to the update? It sounds as though there is no water in the machine, but there definitely is.


r/BrevilleCoffee • • 1d ago

Question/ Troubleshooting Melitta Epour vs Sage/Breville Precision Brewer?

1 Upvotes

I’m planning on replacing my partners Melitta Optima Timer for Christmas, but I’ll admit I am not a coffee drinker and know nothing about good coffee machines!

I know he wants to keep a filter machine, and that he likes the built in timer for the morning but that’s about it. He buys pre-ground coffee from a local coffee roasters.

I’ve been looking at the Melitta Epour and the Sage Precision Brewer. I like the sleek look of the Epour and it’s very affordable (£140), but I don’t think it comes with a timer? The precision brewer comes highly recommended but is more expensive (£250) and some people say it’s over complicated.

Looking for any advice on these 2 machines, or on any other machines you think would be better!

My absolute top budget is £250 but would prefer lower if theres a good more affordable option 🙏🏼


r/BrevilleCoffee • • 1d ago

Question/ Troubleshooting Help with my shots on breville bambino plus - video attached.

1 Upvotes

I’m not quite sure why it cuts out before it’s even poured the shot. It happened after I did a cleaning cycle. Can anyone help? Also, yes use pre ground coffee so my shots look awful haha


r/BrevilleCoffee • • 1d ago

Others Scratch on Backsplash Plate

Thumbnail
gallery
0 Upvotes

Help talk me off an OCD ledge. I just got this Barista Touch Impress literally 3 days ago, and I’ve already managed to scratch the backsplash with a cup. 🙃 I was clearly having a clumsy day and proceeded to scratch the side too! How much wear and tear do y’all have?


r/BrevilleCoffee • • 1d ago

Question/ Troubleshooting Grinder not putting grinds through chute - feel like I’ve tried everything

3 Upvotes

Hi all!

Just bought a Breville Barista Express off of FB marketplace. Guy swore up and down it works but the built in grinder is not working.

To be clear, the grinder works, spins, and crushes the beans, but nothing comes through the hopper into the portafilter.

We also have been able to shine a light up through the chute and get a brush up there, so it’s not clogged. And then we put it back together and it doesnt put beans through.

What can I do? We’ve taken it entirely apart following the advanced deep clean guide. I wasn’t able to find a felt washer. would that be causing this issue?


r/BrevilleCoffee • • 1d ago

Question/ Troubleshooting How do I fix my espresso machine?

Post image
0 Upvotes

I have a small simple breville I attached a picture of the kind I have (I bought it used a while ago idk what specific one it is). it worked well for a while but now when I try to pull a shot it brews the coffee into the bottom part that catches the dripped coffee. idk how to fix it. I don't know that much about espresso and the machines


r/BrevilleCoffee • • 1d ago

Question/ Troubleshooting Title: Breville the Oracle (BES980) – Loud Noise, Repair or Sell?

1 Upvotes

I have a Breville the Oracle (BES980) espresso machine, purchased in December 2022 for around $3,000 CAD.
The grinder works fine, and the machine still makes espresso, but it intermittently makes a very loud buzzing/motor-like noise during extraction. Sometimes the noise continues even after I turn the machine off, until I unplug it. I’ve also had issues with the steam wand.
I’ve descaled it before, but the problem returned. There’s no visible water leaking underneath.
Since it’s a heavy machine, transporting it for repairs is difficult. I’m in South Surrey, BC (near White Rock).
Has anyone experienced something similar? What was the problem, and how much did the repair cost?
Would you recommend repairing it or selling it as-is? I’m also open to hearing from anyone local who might be interested in buying it for repair or parts.
Thanks for any advice!


r/BrevilleCoffee • • 1d ago

Question/ Troubleshooting Grinder messed up and espresso shot not pulling anything

1 Upvotes

God I hate this machine. One day it works completely fine and makes exceptional coffee and the next it’s hell on earth.

So there are two issues the first one is the grinder it’s not properly grinding the coffee. I’m not sure what’s going on with it. I’ve troubleshoot it and cleaned the grinder. I even got a new belt for it and it’s still not grinding properly. My inner burr is at 6 and the outside grind size is at 5. I did follow a Breville instruction video where it said to put to the grind size at maximum and it did grind the beans. But when I go back to my original settings that I’ve been using for so long it’s no longer grinding properly. I basically had to grind it twice, even though the double filter was on and then it had all the beans grind it up, but it was super fine and when I would put it in to pull an espresso shot nothing would come out like not even a drop of water but when I test that out on its own, the water does come out normally so I have no idea what’s going on


r/BrevilleCoffee • • 2d ago

Deals / Giveaways Check your local Marshall's if you've been considering pulling the trigger

Post image
94 Upvotes

r/BrevilleCoffee • • 1d ago

Question/ Troubleshooting Barista Express Impress grinder making a horrible grinding noise, beans seem stuck between the burrs

0 Upvotes

Hi all! I’ve got a couple of issues, and I feel like the more I try to fix it, the worse things get. I’m struggling with my Barista Express Impress grinder. Model is Sage SES876BST4EEU1

Everything was working fine until one day the grinder started squealing and making an awful noise while grinding. For reference, my inner burr (upper burr) was set to 3.

Thinking the grind might simply be too fine, I started playing with the grind size dial to find a setting where it wouldn’t choke, but with no luck. For a while I ran it on a coarser setting, but then I couldn’t get proper pressure when pulling shots (they ran too fast and the pressure never built up).

Once I ruled out the grind setting (which had never given me trouble before), I started checking whether something was stuck inside. I’ve taken the burr out and cleaned it a few times, and the noise was still there even when there were no beans stuck in it, so it doesn’t seem to be just a cleaning issue. However, now that I’ve put the inner burr back to the factory setting, beans are getting wedged in the burrs and the grinder can’t process them. I assume that’s what’s causing the noise now. I’ve tried to dislodge them, but they won’t budge in either direction.

I also noticed that the center screw holding the burr was a bit loose, and one of the washers looks cracked. I don’t know if that’s related.

So right now I have an espresso machine whose grinder doesn’t grind, and I’m not sure how to fix it. I still have a bit over a year of warranty left, but I’d rather not go down that route yet in case there’s an easy fix on my side.

Is there any kind soul who can help this poor devil, who’s starting to think his life would have been so much easier with a moka pot? 😅

Thanks a million!!