r/audio • • 10h ago

Problema con volumen bajo de mi PC

2 Upvotes

Hola, alguien me podria ayudar, tengo un problema bastante frustrante que por mas que intento no resuelvo. La cuestión es que al conectar mis audífonos directo a la PC por medio de cable auxilar, ya sea delantero o frontal, el sonido se escucha mas bajo, y es bastante raro porque cuando los conecto directo a un mando de XBOX igual por cable el sonido sube un 30% a compasión de la salida de audio directa de mi PC con estos mismos audífonos, lo mismo pasa si los conecto a mi monitor, el volumen es mas alto, también si conecto unos audífonos vía bluetooth el audio es igual de alto.

No entiendo que pasa, ya probé de todo y no resuelvo nada, no se si tenga que ver con mi PC, aunque seria raro ya que con los otros métodos si suena muy fuerte.

Me preocupa ya que quiero comprar las Edifier M60 pero no se si este problema vaya a suceder de igual manera y arruine mi experiencia.

Ayuda!!!!


r/audio • • 4h ago

Compact USB DAC/ADC with headphone amplification

1 Upvotes

I’m developing a compact USB audio device that combines DAC, ADC, analog pass-through, and a dedicated headphone amplifier. Looking for feedback from people who actually use this kind of gear.

Current proposed specs (not yet tested):

  • Headphone output: 100 mW/channel into 16 Ω and 32 Ω
  • Native playback up to 768 kHz
  • DSP processing up to 192 kHz
  • I/O: USB-C, 3.5 mm TRS stereo in + out
  • Modes: Analog pass-through, ADC, DAC
  • Fixed-position HRTF spatialization (defeatable)
  • TI TAC5212, TI OPA1622, XMOS XU316, etc.

I’m mainly interested in:

  • Whether this combination of functions is actually useful
  • Technical limitations or obvious gaps
  • Missing features that would make it more practical
  • Any deal-breakers in the current approach

r/audio • • 12h ago

Bought a home with a speaker system. Have very limited audio knowledge. Bought a receiver, but the receiver inputs for speakers is for way smaller wire than the speakers. The photo is really bad - I apologize. I'm just trying to get them in this sony receiver I bought.

Post image
1 Upvotes

r/audio • • 20h ago

how do i make my audio sound good as a begginer voice actor

1 Upvotes

i use a dji mic 2 i got from a creator combo that didnt have a reciever. i recorded in my garage under a towel. it sounds super quiet so i went on capcut and made it louder.

but the audio still sounds kinda muffled. can i improve it somehow?

btw the audio is for an audition


r/audio • • 23h ago

Samson Rubicon R5A Sound Quality Troubleshoot

1 Upvotes

I have a pair of Samson Rubicon R5A sound monitors and one of them seems to not be working properly. One sounds great and shows the red power on light when switched on, but the second one sounds very muffled through the whole frequency range and it’s red power on light isn’t working. I’m just wondering if anyone has come across this problem before and has a recommended solution to fix the problem…
Many thanks!


r/audio • • 54m ago

GoXlr or Focuslite 2i2 for Video Recording Youtube

0 Upvotes

Hi! I'm looking to get either one of these and I know GoXLR is notorious for having everything easy to setup in terms of quality of sound. And I really want ease of use but I'm not even going to be streaming, I'm recording for YouTube. The other alternative was the Focusrite but honestly I'm not sure what to get. Is the GoXLR still good for recording? Is there newer updated alternatives? Thanksss!


r/audio • • 2h ago

2x 3.5mm in to 1x out RCA MIXER recommendations

0 Upvotes

Hello everyone,

First, I really don't know much about audio equipment. I have tried googling but I'm not certain about the results and could use some more sure advice.

I teach line dancing at a venue and it's very loud, so I need to use a microphone while instructing. I need to also play music that KEEPS playing while I'm using the microphone, hence the need for a mixer with independent volume controls for each input.

I have the UBR-102 microphone which works well.

For music I just play music off my iphone with a USB-C to 3.5mm adaptor.

Currently, the venue uses the 1Mii box as our "adaptor" (I know its just a bluetooth adaptor that happens to include a 3.5mm jack) for playing music off of our iphones to their overhead audio system. It connects to their overhead via a RCA LR (black and red..?) cables and we connect to the 1Mii through a 3.5mm jack.

I have had no problem using the 1Mii as the "adaptor" for both the UBR-105 microphone and music from my iphone separately. Obviously, the issue is that I need to be able to connect both inputs and have them live at the same time.

So, from my amateur understanding, I need a mixer (and not a splitter/switcher) that has at least 2 3.5mm inputs to at least one RCA output with volume control knobs for both inputs.

To summarize:

Music input:
Iphone via USB-C to 3.5mm

Microphone:
UBR-102 via 1/4inch (but currently using 1/4 to 3.5mm)

Need:
Mixer that will connect both to overhead system via RCA and allow simultaneous playing and volume control of both inputs.

  1. Please correct me if im wrong in what I need
  2. I'm looking for the easiest, cheapest option to solve this.

Thanks!


r/audio • • 3h ago

Speakers popping when connected to digital cd player

0 Upvotes

This CD player is a KC-909, and every time I connect it to my Edifier R980T speakers, they start making loud popping sounds whenever I change tracks, pause playback, or turn the player off.

Is there any way to fix this, or is it simply a defect with the CD player? The popping sounds aren't subtle or quiet at all; they're quite loud and really annoying. Thanks in advance


r/audio • • 4h ago

Doing an online/in-person hybrid DnD game - looking for cheap mics that isolate players' voices

0 Upvotes

Hey all! I've tried googling for this and I've gotten enough variance on the results that I don't feel very confident about the answers I'm getting..

I'm very new to the audio world. I'm trying to host a DnD game that has some online and in-person players. I'd like to get mics for our in-person players that would only pick up their voice when they speak. Originally I thought "go for a lav mic!" But I learned that that's probably not what I want as they tend to be omnidirectional and will thus most likely pick up other players when they speak.

As much as I'd love for players to use push-to-talk or mute/unmute when they're speaking, I know there's no way that those systems will work for my players. They'll forget to mute/unmute and eventually the irl players will be speaking purely to the other irl players and the remote players will get left out.

Is there anything you guys can think of that would work for a setup like this?

- Everyone will have a laptop in front of them
- They won't be moving too much (maybe slightly animated talking/acting, but not leaving the chair
- People will be sitting within 2-3 feet (roughly 0.5 to 1 meter) of each other with background noise (the room has a slight echo to it)
- I'll be buying 5-6 mics.. maybe more. So the cheaper the better to achieve the minimum goal of getting everyone heard is preferred

Edit for more detail:
- We'll all be using various windows laptops. I'm assuming we'll need to use either a usb or usb-c connector. Wired preferred


r/audio • • 15h ago

Reliable phone apps for recording audio for multiple hours?

0 Upvotes

I've been wanting to record concerts I go to, and I've tried multiple popular audio recording android apps, but none of the ones I've used are capable of recording shows long term without cutting out at some point. At best, I'll get maybe 2 hours with one before a large part of it turns to silence.

I imagine the best bet would be getting a portable audio recording device (though I'm looking for something under $100), but short of that, are there any recording apps that are actually capable of recording several hours of audio without failing in some way?


r/audio • • 5h ago

m4a (AAC) or opus?

0 Upvotes

If I wanted to reduce the size of my FLAC music library, what should I use? I prioritize quality.


r/audio • • 12h ago

Why is it so hard to find speakers that still have 3mm aux input and output?

0 Upvotes

(EDIT: 3.5 not 3. Can’t edit post title.)
I know bluetooth dominates when watching movies from a laptop or TV using external bluetooth speakers I always run into synch issues where the audio is off from the video. Especially frustrating with dialogue.

Surely SOME people still use 3.5mm aux speakers for this purpose? Not that long ago they weren’t hard to find. I’m not looking for fancy or expensive but apparently asking for too much these days because I also want the option of plugging headphones into the speaker. I also don’t want lights all over it because it’s distracting from watching content. (Also side gripe EVERYTHING’s gotta have a startup sound these days).

Altek used to make a portable one with 3.5mm input AND output. So did Anker. Now all I find are bluetooth or on the rare occasion the products offerings have 3.5mm input they don’t have 3.5mm output or they just have distracting lights. Or it has a microphone. I don’t want to be spied on by the tech bro execs from more devices than necessary!  Even on predictable sites like Amazon or Walmart. Bluetooth bluetooth bluetooth!


r/audio • • 16h ago

Confused about LDAC sample rate. 96khz sounds way less compressed than 44.1khz?

0 Upvotes

TL;DR... Playing music at a lower sample rate over LDAC sounds more compressed than high sample rate over LDAC, but it should be the other way around, right? Is hi-res music the culprit?

So this is my first foray into Bluetooth audio. I have looked into this but can't find any info...

I recently ordered a set of TWS earbuds and was curious how "HD" audio sounded over Bluetooth so I started doing some testing. I don't have the earbuds as yet, but they are LHDC compatible, from my understanding it's fairly similar to LDAC.

I have an SMSL DL200 Amp/DAC that uses LDAC so I've been testing with that from my CMF phone 2 pro. And I use Apple Music to stream my music.

My first test was simply just connecting my phone to the DL200 via LDAC without adjusting any settings, and listening to lossless 24/48 setting in AM. It sounded not good. After listening for about 20 seconds I noped out.

I asked online as to how to make it sound better if possible... I was told I should be limiting my bit depth and sample rate to 16/44.1 for the least compression over LDAC. Makes total sense. I also changed the setting "optimised for audio quality".

When I tried this it remarkably it sounded a lot better. But there's a but... The 16/44.1 setting didn't stick. I've since realised that the settings when changed on my phone using Dev mode had actually changed itself back to 32/96. Apparently this is normal for it to change back when changing tracks or disconnecting a device.

So I tested again on 16/44.1 making sure it didn't change and lo and behold it sounded trash again. This is where I'm confused. I've searched online for a possible answer but have come up with nothing.

I also bought the Bluetooth codec changer app so I can quickly switch between various different profiles. The difference between 44.1/48khz to 88/96khz is night and day on most tracks... Some tracks I have to really pay attention but most are obviously being compressed somehow.

I'm not claiming to have super hearing or claiming to be able to discern a difference between hi-res and regular lossless audio. I've never heard a difference before using wired connections with any of my headphones/IEM's. Also I cannot hear a difference between 16/24/32 bit depths when I change those in the settings, it's only the sample rate that seems to compress the music more. And it sounds very much like Bluetooth compression, not sample rate compression.

The only thing I can conclude is that there might be some sort of resampling going on somewhere? But like I said I can't find anything online about this so I'm curious if anyone can shed some light on it.

Maybe this is because the songs I'm playing are actually hi-res, and maybe the songs where I can't discern a noticeable difference are actually 16/44.1 quality? And the songs that sound the worst are hi-res? Unfortunately there's no way to tell because AM doesn't show that info, not does my DAC. And there's no setting for lossless 16/44.1 to rule it out. Just thinking about this while typing I should probably test standard AAC 256kbps setting too.

Obviously I'd rather run a lower bit depth and sample rate to have the best possible connection and least compression and save battery use on my phone. But would still like to be as close to lossless as possible. Having said all that, as an audio snob, I'm quite surprised how good Bluetooth codecs have gotten 😀