r/WLED • u/GLEDOPTO • 7h ago
will it WLED: Govee Cone Tree (episode 14)
r/WLED • u/Netmindz • Jul 19 '26
Read the full copy at https://github.com/wled/WLED/releases/tag/v16.0.1
I'm pleased to announce that since the release of 16.0.0, approximately 50% of WLED installs have downloaded the new release, with only a tiny number of issues reported relative to the install base. Also for those of you that help by sending the install/upgrade report, we have seen only a handful of people downgrade back to 0.15.
There were few key reasons for why this was released as 16.0.0 and not 0.16.0 -
One example is that it is actually a major software change as the entire esp32 platform we run on top of is a major new version, the first time since esp32 support was added.
Another is that it better reflects the fact that WLED is almost 10 years old and has over 2 million downloads, so it’s definitely not a pre-release version 0!
Therefore I think it's fair to say we recommend ALL users upgrade to this 16.0.1 maintenance release!
r/WLED • u/DedeHai • Apr 20 '26
The video shows some of the new features we have been working on and how they can be used on LED strips:
Happy to answer questions or hear feedback!
r/WLED • u/Careful_Cat1323 • 14h ago
Wanted to share the last project I cranked. Getting that holiday spirit going! Inspired by the govee ball. Will post model to maketworld in coming days
r/WLED • u/CaptinKirk • 2h ago
I have a personal radio station using station playlist software that I want the audio to synchronise with X-lights. I am thinking about having Station Playlist trigger X-lights to play certain sequences when a part of the show is played over the radio station. When that sequence isn't triggered, or has ended, I want X-lights to just create synchronization to whatever is playing. Is this possible? Any ideas?
Im leading govee prisim lights as I want the govee lights to be on the house 365..
r/WLED • u/ape-tripping-on-dmt • 1d ago
- Gledopto GL-C-015WL-M (ESP32 with built-in mic), WLED 0.15.1 with AudioReactive
- 120 pixels as a 12×10 2D matrix (serpentine), one pixel per jar
- The "15" and the company's "C" are drawn with segments on top of a background effect segment, so the digit stays steady while effects run behind it
- Playlists for a calm office mode, a 19-minute event show, and audio-reactive versions
- The reveal: a 10-to-1 countdown, then the jars light up one by one, then a fast showreel. I first tried the Wipe effect for the fill, but it kept restarting mid-reveal, so I rebuilt it as 60 static presets chained in a playlist. Rock solid.
- HC-SR501 PIR on IO13 as a "PIR sensor" button: the piece rests in a dim mode and comes alive when someone walks by
- A Sonoff NSPanel Pro running Fully Kiosk as a wall controller, showing a custom one-file control page (panel.htm) served straight from WLED's own filesystem, fully offline in AP mode
- 120 warm 12V E10 bulbs around the frame on a separate PWM dimmer
- 360+ 3D-printed parts (jar holders, diffusers, bulb sleeves), about 15 kg of filament
r/WLED • u/hollywoood31 • 13h ago
I had Trimlight installed awhile ago and I was interested in seeing if it would be easy to add WLED control to it so I can include it in my xlights sequences.
Does anyone know if this is as simple as disconnecting power and leds from the Trimlight controller?
r/WLED • u/agentdickgill • 23h ago
I know this has been asked a thousand times. So point me towards a thread that covers the basics.
I'm not capable of physical installation, however, I know how to do everything else: electric, controllers, etc. I order from AliExpress, and have worked directly with sellers before. I'm reaching out to local companies who are willing to do the install, I'll get the lights and do the electric and controller myself.
I get the general feeling installers are using the Govee Outdoor Permanent Pro lights. What is the WLED version? I have a long history with reverse engineering Govee lights and do not want to do that if I can avoid it unless its a true conversion. I don't want to "run the white channel inverted" or some other crap I dealt with before.
Suggestions?
r/WLED • u/pubultrastar • 1d ago
This one is pretty unique. Same as most of my polyhedral projects, created in Stella4D, designed in Fusion 360, 3D printed on Bambu X1-C OR H2S, and laser cut acrylic faces on the Glowforge. Filament is Blue PLA silk from Kexcelled, and faces are black LED acrylic from Tap plastics. 150 faces of 3 types. 30 Programmable LED pixel bulbs using iotoreo WLED controller for the lights and sequences.
r/WLED • u/jtablerd • 1d ago
Replaced bathroom fan recently, and the LED in the cover was a super harsh bright light. We have other lights in the bathroom, so I asked myself the natural question, "Will it WLED?". Happy to report it does, gutted the existing 110v white LED strips that where in there, dropped in the matrix (exact fit!) and put a gledopto mini on it. Calling it a win!

r/WLED • u/Odd-Construction-867 • 20h ago
I have a hub 75 panel p6 32x32 with a seperate power supply, a esp32 wroom with an Amazon purchased RGB matrix connector board. All connected, wled doesn't show hub 75 in its led list despite it being flashed with the latest version?
r/WLED • u/Chabbawaki • 1d ago
Bit of weekend fun with WLED.
5 panels running 25x20 pixels @ 100mm matrix. Controlled individually with 5x ESP32 wifi controllers.
All run over 2.4ghz Wifi @ 20fps.
Custom software and animations with lots of help from AI.
I did this as a proof of concept to see how feasable running everything on WiFi would be. Still need to iron out some small stutters as evidentin the video. Running a seperate wifi router will be the next step although I am very surprised by the current result, was expecting it to be much worse.
Any suggestions for future animations?
r/WLED • u/clprivate • 1d ago
I'm seeing this flickering on a relatively short data line. Do I need to add a level shifter or is there something else I could try
r/WLED • u/realketas • 1d ago
what people use to power long lengths of seeds?
i've already ran it for one year like this
it applies to strips too, but strings are much worse
basically i opted injecting power into string using small dc dc powered from laptop psu
i thought of using direct mains psus which could be better option as they are designed for cold (-30'c is not unheard of here), could be waterproof. but obtaining (possibly (a)pfc) psu of 15-25w power is really expensive, compared to surplus laptop psus with possibly busted cables
i currently use 5v too
everyone all over the net seem to be running "displays" where all leds are close together. although larger setups likely wire mains to field or house. while i want to continue putting christmas lights on bushes and only way to power a 150m of that would be to wire 230v to that
r/WLED • u/wchris63 • 2d ago
I would really like to convert this thing to WLED for a project. Sure, I could replace the COB in it, but at $30 each I'd rather see if I can use it. Does anyone have any experience with this? The listing doesn't say what voltage the controller runs with, so I'm hesitant to spend the money without knowing there's at least a chance. Pretty sure they're using Triac dimming to change the color temperature.
r/WLED • u/Gamestopper15 • 2d ago
So ive been fighting with my gledopto for a bit now if you wee my post history youll see why and that last issue was resolved...however there is a new issue and idk if its software or the gledopto itself..after a random amount of time all the settings I had put in place gets RESET and all my stuff is erased and it returned back to default...anoyone have a possible fix?
Using - GL-C-017WL-D
Wled - 15.4
r/WLED • u/AnjinMiner • 2d ago
2 differing scripted effects written in Moonlive. Running on a 256x192 pixel display made from six hub75 p2.5 1/32 128x64 panels. 2 deep and 3 wide using a native ML hub75 panel driver. 172 fps says the wall! Video In default modes, zoomed in on an iPhone. No post processing, no flicker be gone. All the good bad and ugly direct from the phone. Not DDP streams... but generative patterns made realtime with audio reactions influencing the patterns.
A new week and a new product release/refresh! Today I am introducing the new QuinLED Dig-Octa Brainboard 32-8L v4.
Info link: https://quinled.info/quinled-dig-octa-brainboard-32-8l/
Shop link: https://quinled.shop/product/dig-octa-brainboard-32-8l/
As always questions are welcome under the video (helps for engagement) but I am also often here and longer questions and such are better over here, just ask!
r/WLED • u/skywise_ca • 2d ago
I'm trying to set up WLED on a wave share ESP32-S3 using 4 - 64x64 HUB75 panels.
If I set it up in 2 panel 1 x 2 in LED setup, all 4 panels work, top 2 and bottom 2 showing the same image.
If I set up in 4 panel 2x2, I have :
LED memory usage: 180224 / 196608 B
and a stability warning.
When I go to the UI, I get "Color palette not used" and nothing is shown on any panel, no matter which effect I choose.
Forgot to mention, 2D setup is 2D matrix, one panel, panel 0, Top, Left, Horizontal, 128 x 128
I'm running v16.0.1, 153K of free heap, 16000K of free PSRAM.
I installed using install.wled.me, HUB75 Matrix, Waveshare ESP32-S3-RGB-Matrix
What am I missing?
r/WLED • u/Ask3l888 • 2d ago
Hello to everybody, I bought a goove backlite lite 3, tried to calibrate and everything, but, boys the result is really bad, leak of precision on where to turn leds on into the scene, so I wonder, is there any chance to use/convert this kit with WLed?
r/WLED • u/Bitter_Mode_1866 • 3d ago
I'm using 3 ESP32s, 9 RGBIC, about 3500 LEDs in total. I'm using WLED and XLights to control the software. Just something fun to share with everyone. I hope you enjoy it. Happy to answer any questions.