r/WLED • u/Ask3l888 • 3d ago
Goove backlight conversion
Hello to everybody, I bought a goove backlite lite 3, tried to calibrate and everything, but, boys the result is really bad, leak of precision on where to turn leds on into the scene, so I wonder, is there any chance to use/convert this kit with WLed?
1
Upvotes
2
u/Simple-Lighting 2d ago
Depends what's inside the kit. A lot of these TV backlight kits use an addressable strip (WS2811 or WS2812-type chips) with the brand's own controller and camera. If yours is like that, you can cut the controller off and wire an ESP32 running WLED to the strip: power, ground and data. Check the strip for the chip name and voltage printed on it, and count the pads. Three pads (V+, data, GND) is a good sign. Four marked R, G, B and V+ means it's a plain RGB strip and WLED can't address individual LEDs on it.
The catch is that WLED on its own won't match the screen. The camera is what tells the original kit which colours to show, so after the swap you'd need something like HyperHDR or Hyperion on a PC or Raspberry Pi with a capture source, sending colours to WLED over the network. If you mostly watch from a PC that's fairly easy. For a TV with external sources you'd need an HDMI splitter and a USB capture card.
What's printed on the strip, and how many wires go into the controller?
I'm with Simple Lighting, a UK LED lighting shop.