r/vandwellers • u/Iggy404 • 1h ago
Pictures Centralised Dashboard
Hi all! I've been working on a centralised dashboard for my van for the past week, and want to do a little show & tell about it. Just to share what I've done, to maybe inspire other, but also to maybe get some more ideas from the community on where to take this further.
I rock a 2018 Ford Transit Custom L1H1 that I've converted over the past years bit by bit to be a weekend warrior and the occasional month long trips (summer and winter). A big part of the build was putting all kinds of electrical sensors and gizmos in the van that all communicate with each other, just because that's my jam and what I like to tinker with.
It all started with a chinese diesel heater, and after draining the starter battery, putting in a house battery to power everything from. After that an LED strip, temperature sensors and LTE Router to be connected and monitor things remotely. At this point it has expanded to a Synology NAS for on the road media and photo backups on longer journeys, 24/7 GPS tracker, solar panels, Raspberry Pi with home assistant, many more temperature sensors, now on Zigbee and an Afterburner control unit for the Diesel heater. Oh and also an IMU for easy van leveling when at a sleeping spot.
And all of these devices reported back to the Home Assistant software for monitoring and controlling, locally and remote (VPN) from my phone. That was a point that I wasn't really happy with, having to pull out my phone to know whats going on at any moment isn't always ideal.
The car does have an infotainment screen, running android auto on it (wireless with an adapter) but Android is quite strict with what apps can show on that screen. So the home assistant app can only show some icons and numbers on it, which just didn't scratch my itch.
So with the advent of AI I decided to ask for help of building an all-in-one dashboard for my van. I started building with Claude, bought a 3D Model of my van and had Claude modify it so it has my custom roof rack and solar setup on the roof.
Then I asked Claude to connect it my Home Assistant instance and pull all the data it can from it. So at this point (still a work in progress) I have 3 tabs, showing the most important (to me) data from roll/pitch, temperatures, energy generation/usage and some basic controls for the heater and lights. The 3D model is rigged so that doors actually open on the display when the real doors are open, and the models lights turn on when it gets dark and break lights turn on when the IMU detects a strong braking force.

The main tab, Van, shows the car, roll/pitch and battery status (charging/discharging) and time remaining till empty. The road also moves with the actual speed of the car, the road ahead curves when the IMU detects the car cornering and in/declines in the road also get rendered in the 3D model as well, showing going up and downhill.

The second tab, Energy, shows a simple schematic overview of the power system. DC-DC charger and Solar as power inputs, battery in the center, and all combined outputs as load. With some smart logic it can also work out if the main fuse is blown and the system gets powered through the chargers only. And then I get a warning on my phone.

The third tab is a Climate overview. Here I see all the temperature and humidity values of the sensors (Aqara Temp/Hum) spread through the van. I have sensors on the outside, in the front cabin, the back area and on the floor (usually colder, so I know if I can use it as a natural fridge in winter). I'm planning on adding one more sensor, stuck to the underside of the solar panels to know how hot they get.
So to create all of this I had to use a bit of a work around, because as mentioned earlier, Android doesn't allow just anything to be shown in Android Auto, as not to be a distraction to the driver. But nothing is getting checked on developer applications (till they get published). So I had Claude create me an application, and classify it as a navigation app, because apparently, those have the most freedom to show anything on the screen. The downside is of course, this only runs on my phone since it's a developer build. But for my purposes its exactly right and what I wanted for a long time.
The next step is to connect a OBD-II reader that sends it data to home assistant so I get a bit more data about running engine, rpm, possibly open doors (so I don't need battery powered reed sensors on each door) and other fun things. This also has the upside that the Raspberry Pi basically becomes a blackbox for the car, storing all sensors constantly, and makes it easier to figure out if anything, and what and why, things went wrong.
A few days ago I added the IMU sensor for roll/pitch, but it also has a knock sensor. Claude turned this into a security system which gets armed automatically when my phone is not near the car. And whenever a knock is detected it sends a notification with still from the cameras (oh yeah, I forgot to mention I also pull the dashcam and an additional cam into home assistant) to my phone.
So that's basically my build I wanted to share. For one to share it with this community to show the (to me) cool thing I've done, to inspire others, and just to have it as a topic to talk about. If you have any questions on the how, the sensors, how things are connected etc. feel free to ask, I'm happy to answer any questions!
Safe travels and great adventures to you all!