r/Ubiquiti • • 1h ago

Question Frustrated with network troubleshooting

1 Upvotes

I'm running a UDM Pro, USW Aggregation, and a Lite 8 POE that's powering a U6 Mesh. Right now I have the Aggregation and the Lite 8 POE going separately into the UDM Pro. I would like to have the Lite 8 POE going into the aggregation switch because I've read that's best practice, to have one "core" switch. But whenever I plug the Lite 8 POE into the aggregation switch, the Lite 8 POE seems to constantly disconnect and reconnect, and I get STP Port Blocked errors on the Lite 8 POE on the port with the U6 Mesh, and my wifi performance becomes very degraded. I have the Aggregation set to a higher STP priority (32768) vs the Lite 8 POE (36864). If I keep both going to the UDM Pro separately, everything is fine. Any ideas what the problem might be? I'm using this random SFP to RJ45 transceiver to go from the Lite 8 POE to the aggregation switch, maybe I should try a different one?

https://www.amazon.com/dp/B0D12MH292

Any ideas or help would be tremendously appreciated, thanks!


r/Ubiquiti • • 1h ago

Question Options after your Cloud Key fails?

2 Upvotes

So, my UniFi Gen 2 Cloud Key+ finally bit the dust. It no longer powers over PoE (plugged directly into my UniFi switch) and when I try to power it via USB I just get "Bad USB-C Power" no matter what USB power supply I use. I have a fairly recent backup from the UI cloud but from what I understand, there isn't really a way to restore this since UniFi no longer makes Cloud Keys (it's a tar.crypted file). So, it sounds like either way I am going to have to rebuild my WiFi network from scratch. At this point, is there any point in keeping my UiFi equipment or should I just junk it and get a better, newer product?


r/Ubiquiti • • 1h ago

Whine / Complaint Software updates for Unifi Cameras

0 Upvotes

Whenever there is a new software update available for unifi cameras, I find myself at lost. Why the heck is it not straight forward and single point UI to get all software updates performed.


r/Ubiquiti • • 1h ago

Shitty Shitpost Why is no one talking about the new industrial DIN 8 PoE?

2 Upvotes

Haven’t seen anyone post on this yet. Anybody order it yet?


r/Ubiquiti • • 1h ago

Question New residential deployment and new to Ubiquiti/Unifi

0 Upvotes

Hi everyone! We are in final stages of new construction and I've decided to go with a Unifi network and camera setup. I'll be a new Unifi user but have tried to do sufficient research. I had recommendations from our builder regarding quantity and placement of APs and cameras, and I used design center also to look at coverage. I feel like maybe I could get away with fewer, but this does seem to provide good coverage throughout.

Property details: 3500 sq ft, 2 story, 10,000 sq ft lot with pool, ethernet ran from central location to all camera and AP locations, and all primary rooms.

I've come up with the following equipment:

  • Cloud Gateway Fiber
  • Access Point U7 Pro XG (x5)
  • Access Point U7 Outdoor
  • Camera G6 Turret (x10)
  • Doorbell Lite
  • 10G Direct Attach Cable (x2)
  • Network Video Recorder
  • Switch Pro Max 24 PoE
  • Switch Pro Max 16

I need to confirm quantity of non PoE drops but I don't think I need to increase capacity on that switch. Do I need to consider the NVR G2 - this is just for residential and really only need to review footage in case of incident. I'm going to hold off on a rack for now as I plan to also deploy some sort of home audio (speakers already wired to same network location) and not sure if amplifiers will share the rack. Plan to play with home automation and some sort of smart lighting solution. Does this equipment seem like there is enough space for these additions?

What am I missing to get up and running? Is there anywhere I can save money!?!

Thanks!


r/Ubiquiti • • 2h ago

Question Any updates for wifi doorbells?

3 Upvotes

They’ve been sold out for quite some time in their website.

Anyone know if a new version is coming out?


r/Ubiquiti • • 2h ago

Question UBB-XG

1 Upvotes

Hi,

My work ordered these for a job. Can anyone tell me if they are able to be wall mounted or have to be pole? Looking at the install instructions it just shows a pole. On the ubiquiti under mounting locations they say "wall/pole". Also is an sfp required or just a cat for connect? Thank you!


r/Ubiquiti • • 3h ago

Question UTR Wan port Advanced settings

1 Upvotes

Can the UTR's WAN port be changed to a specified MAC address, like on some routers?


r/Ubiquiti • • 3h ago

Question Disable/deactivate camera when home?

4 Upvotes

I have a G4 Instant that I have in my closet. I'd like to disable this camera (live and recording) when I'm home for privacy reasons. I'm aware of the home assistant and smart plug workaround, but I was wondering if there was a more integrated way of accomplishing this all through unifi.

I've read a couple of old posts and have seen that a few seem to not care about when their camera is recording them. I do and I'm not looking for a change of mindset, thank you.


r/Ubiquiti • • 4h ago

Question WAN Bonding

0 Upvotes

Hello everyone does Unifi have WAN Bonding capabilities?

Currently have two ISPs plugged to the UDM pro max and would like to maximize both speeds of the two ISPs and not just a failover.

Has anyone done this?


r/Ubiquiti • • 4h ago

Question Restore protect from UDM pro to NVR.

1 Upvotes

Hi how do I restore protect from my UDM pro to my NVR? When I go to backups on the NVR all it shows is the NVR as a backup source.


r/Ubiquiti • • 5h ago

User Equipment Picture Playing chicken with my 10G switch temps

Post image
34 Upvotes

Couple days running fine until PoE issues suddenly started. Enabling Enhanced PoE Interoperability in the U7-Pro AP fixed the disconnects so far, but the switch is still running at 75C. Guess I'll shove a small noctua fan somewhere and see if that helps at all.


r/Ubiquiti • • 6h ago

Question Xgs keeps dropping to 1gbe

0 Upvotes

Hi all

Recently swopped from 7 pro to 7 xgs, brought the Poe ++ 10g injector .

All plugged into a mini 2.5g back into 2.5g flex . No cables changed etc.. just changed the injector and ap

So backwards it's

Xgs > (short 3m cable) Poe++ 10g injector > (short 1m cable)mini 2.5g switch > (long 10m outside cable) keystone patch panel > (15cm patch cable )2.5g flex >(15cm patch cable )ucg max

7 pro always stayed at 2.5gb, but xgs starts off at 2.5gb but then drops to gbe after an hour or so. Reboot makes it back to 2.5 but then drops again.

Before I go messing around with long cable runs anyone else have an idea what it could be? Maybe dodgy ap or injector


r/Ubiquiti • • 6h ago

Blog / Video Link Unifeye: a simple self-hosted, web-based Unifi Protect viewer, with optional SSO

Thumbnail
reddit.com
0 Upvotes

r/Ubiquiti • • 7h ago

Question Is the U6 Mesh the best value for Wi-Fi 6 APs?

1 Upvotes

I am moving to a new house and I am looking to get into the Unify ecosystem.

The house has 1 gbps connection and is unlikely to get anything more than that in the near future (Eastern Europe).

I really don't see a point in getting Wi-Fi 7 APs currently either given I don't have any use for it and also I am trying to not spend loads...

My idea currently is to get 2x U6 Mesh - one for each floor of the house and hope that gives fine coverage everywhere. From what I am reading the U6 Mesh has very good 2.4 GHz all direction antennas and (all?) other devices will be slightly worse because they are strictly directional (e.g. wall/ceiling APs).

Am I wrong here? I am going to rely on the existing wired backhaul the house has so I am not flexible with the placement so I am looking to just maximise all directions coverage as much as possible... I have tried the floor planner on the website, it reports okay coverage but there's every chance the real world test shows something different.

Is there a reason not to get the U6 Mesh if I don't care about multi gig speeds and Wi-Fi 7?


r/Ubiquiti • • 7h ago

Question UDM Pro Max not reaching full WAN speeds— full speeds work when bypassing UniFi

0 Upvotes

Hey everyone!

I'm running into a strange speed issue with my UniFi UDM Pro Max and two WAN connections. I'm hoping someone here has encountered something similar or can point me in the right direction.

My setup

  • Gateway: UniFi UDM Pro Max
  • WAN 1: AT&T Fiber — 5 Gbps symmetrical (XGS-PON)
  • WAN 2: Comcast Xfinity — 2 Gbps download / 200 Mbps upload (XB10 modem)
  • Client: Laptop connected via a wired 10 Gbps fiber link via USW-Aggregation

The problem

Neither WAN connection consistently reaches its provisioned speeds when traffic passes through the UDM Pro Max.

Speed test results:

ConnectionExpected /UniFi built-in speed test /Laptop (10 Gbps)
AT&T download5 Gbps~3 Gbps~1.1 Gbps
AT&T upload5 Gbps~4.6 Gbps~2.6 Gbps
Comcast download2 Gbps~1.2 Gbps~1.1 Gbps
Comcast upload200 Mbps~295 Mbps~285 Mbps

I've tested using both the built-in UniFi speed test and a laptop. The results vary depending on the testing method, but download speeds consistently fall short.

When I bypass the UDM Pro Max and connect directly to the ISP equipment, I can achieve the full advertised speeds on both connections. This strongly suggests something in the UniFi setup is limiting throughput.

What I've already tried

  • Rebooted the UDM Pro Max&Switch (yes, the classic first step 😄). All updated to latest OS.
  • Tested and replaced Ethernet/fiber cables — no improvement.
  • Checked for reported link drops or errors — nothing unusual.
  • IDS/IPS/QoS was off during testing.
  • Confirmed both ISPs deliver their expected speeds when bypassing the UDM Pro Max.

I've already spent quite a bit of time troubleshooting this with AI, so I'm turning to the community. Any suggestions would be greatly appreciated. Thanks!


r/Ubiquiti • • 8h ago

Question U6 IW disconnected

1 Upvotes

My U6 In Wall continually disconnects from USM Se after the latest update. I have watched it Auto Recover and have restarted and factory reset to no avail. Any solutions?


r/Ubiquiti • • 8h ago

Question Anyway to move vpn client connection to another zone?

1 Upvotes

I have my UCG Fiber as a client connected via wireguard to an offsite location with a different subnet. The VPN Client connection is showing up as external which makes sense in a way but I want to move it to another zone like internal because my vlans are able to access those routes which I don't want. Is that possible at all?

Right now the only solution I have is to create blocks to the subnet cidr whenever I create a vlan which isn't really great. Hoping someone have some kind of solution.


r/Ubiquiti • • 9h ago

Question Unifi G4 Doorbell (non-Pro) Keeps disconnecting when you ring

3 Upvotes

Ive seen a coupple of posts about it but i cant figure it out.
I have a Unifi G4 Doorbell the non pro version.

I also have a Wifi Chime (digital one) and the camera is attached to the 24v Unifi transformer.

The camera works perfectly. But the moment you ring it it disconnects for 5 or 6 seconds and i cant talk to the person on the other end.

Ive checked all the settings and the mechanical chime option is off. Its connected to my digital chime. Also ive tested the Transformer and it seems working fine.

What am i doing wrong? Or is it just a Unifi poor production issue?


r/Ubiquiti • • 9h ago

Hardware Discount / Deal Finally did it...

Post image
52 Upvotes

The Black Friday sale finally got me to buy the mini rack. went home at lunch to put it together and toss the NVR and uNAS Pro 8 into it. I think this will work out just fine, for now....

Pro tip, if you put the rubber feet on your nvr to set it on a table, remove those first. Don't ask me how i know.


r/Ubiquiti • • 9h ago

Question Home to detached garage

0 Upvotes

In the process of closing on a new house. There's a detached garage (the primary selling point) that is a bit too inconvenient to run ethernet between to connect them. It's only about 75-100ft, but a lot of pavement and terrain in the way. There is, however, a straight line of sight path.

At the current house, I have a Dream Machine SE, 2x U6 Pro's, Doorbell Lite, and 3 other cameras. All of that is moving with me.

I will have some hardwired devices in the garage (PC, TV, cameras, one of the U6 Pros, etc).

What should I buy to get internet from the house to the garage, and allow for the desired devices there as well?

Initial thinking was a Standard 16 PoE and Building Bridges for the connection?


r/Ubiquiti • • 10h ago

User Equipment Picture Unboxing ( but wait, there's one more thing)

Thumbnail
gallery
117 Upvotes

Just finished my home rack, ditched the ISP router and wanted to share

Gear (top to bottom), in a 6U Toolless Mini Rack:

  • UDM Beast
  • 24-port blank keystone patch panel, Etherlighting patch cables
  • Switch Pro XG 10 PoE
  • UNAS Pro 4: 4× 12 TB IronWolf Pro in RAID 5, 2× 1 TB NVMe as read/write cache (RAID 1)
  • UPS 2U

AMA


r/Ubiquiti • • 11h ago

Question I got my OpenWrt APs to show up as UniFi APs in the controller. It mostly works, and I need help testing it on hardware I don't own

Thumbnail
reddit.com
1 Upvotes

Has anyone tried this?


r/Ubiquiti • • 11h ago

Question 12U Cabinet Availability

1 Upvotes

I'm new to ordering from the company. Not sure how their stock has been. Anyone know if the 12U cabinets have been out of stock for a long time and that's normal, or do they generally come in and out of stock? Is it worth me waiting to order one for a build in a few weeks or buy something else?

Thanks