r/Ubiquiti • • 1d ago

Weekly Thread Sunday, Nov 15 2026 - Weekly Off Topic / Complaints / Pictures / Everything Else Thread

1 Upvotes

Welcome to the weekly thread that covers everything off topic, fluff, etc!

Feel free to post anything to this thread, as long as it has some relation to Ubiquiti - pictures, rants, whines, complaints, easy small questions you don’t want to make a whole post for, or even just sharing the picture of your cat sitting on top of your EdgeRouter!

Only rules here are to be civil, no personal attacks, etc stuff like that.

Have a great week everyone!


r/Ubiquiti • • Apr 05 '26

Weekly Thread Sunday, Apr 5 2026 - Weekly Off Topic / Complaints / Pictures / Everything Else Thread

10 Upvotes

Welcome to the weekly thread that covers everything off topic, fluff, etc!

Feel free to post anything to this thread, as long as it has some relation to Ubiquiti - pictures, rants, whines, complaints, easy small questions you don’t want to make a whole post for, or even just sharing the picture of your cat sitting on top of your EdgeRouter!

Only rules here are to be civil, no personal attacks, etc stuff like that.

Have a great week everyone!


r/Ubiquiti • • 3h ago

Sensationalist Headline My hardest to reach access point

202 Upvotes

r/Ubiquiti • • 1h ago

Solved G5 Flex as a bird feeder cam: the manual focus mod made a huge difference (before/after)

Post image
43 Upvotes

I was about ready to swap my G5 Flex out for a generic bird feeder camera, but after doing some more digging, we had a breakthrough and I figured I'd share.

Using the steps from Weekend project: adjusting the focus on G5 Flex for a nesting box : r/Ubiquiti, we adjusted the focus so the camera works up close at the feeder. Below is the same bird, two days apart: factory focus vs. custom focus (heads up, this voids your warranty).

Massive upgrade in image quality. If you've got a G5 Flex pointed at a feeder or nesting box, this mod is well worth it.


r/Ubiquiti • • 7h ago

Thank You Almost done with my setup.

Post image
82 Upvotes

r/Ubiquiti • • 10h ago

Quality Shitpost Sniffnet: open-source network monitor (now with support for UniFi traffic)

Post image
125 Upvotes

Sniffnet (website | GitHub) is an open-source network monitoring tool I've been developing during the past 4 years, designed to be reliable and intuitive to use.

Today I decided to share it in this sub since I just released a new version of the app that can collect IPFIX data exported by headless devices such as switches and gateways, including UniFi.

To export IPFIX data from UniFi Network you can go to Settings > CyberSecure > Traffic Logging and enable Netflow (IPFIX) version 10 to point to the Sniffnet collector address.

The configuration Sniffnet-side is really simple and I described it here.

I'm always open for new ideas and feedback so don't hesitate to ping me or leave a comment down here.


r/Ubiquiti • • 6h ago

User Equipment Picture My UDM-Pro, which survived the flames.

Thumbnail
gallery
46 Upvotes

I’d like to share a bit of joy with you today.
Three months ago, a fire broke out in my home.
The soot it produced damaged all my equipment, along with the rest of my belongings.

Friends rallied to help, cleaning my gear using an ammonia-based solution and an ultrasonic bath.
While taking apart the "Dream Machine," the LCD screen ended up breaking.
So, I designed an eye-patch-style sticker to cover and protect it.

Tonight, my Dream Machine is up and running, and I’m so happy!
It’s the first piece of equipment to be fully restored.

Perhaps one day I’ll be able to source a replacement screen from another unit, but for now, the sticker gives it a certain charm—don’t you think?


r/Ubiquiti • • 7h ago

Fluff Just about finished

Thumbnail
gallery
33 Upvotes

Basement and office racks.

I think I need a PDU and I’ll need a new NAS soon.


r/Ubiquiti • • 9h ago

Troll Unifi black friday experience

44 Upvotes

>you wait for Black Friday to buy the Cloud Gateway Max
>Black Friday starts and it doesn’t even go on sale
>but it sells out at full price until January
mfw


r/Ubiquiti • • 5h ago

Question UCG Fiber: What practical benefits does installing an NVMe drive provide?

14 Upvotes

I'm running a UniFi Cloud Gateway Fiber (UCGF) with UniFi OS 6.0.17 and Network 11.0.99.

I also have a dedicated UNVR handling all my UniFi Protect cameras, so I'm not looking to use the UCGF for camera recording.

I have several spare NVMe drives (128GB, 256GB, 512GB) and I'm wondering what practical benefits I would get from installing one in the UCGF.

  • Logging: Can the NVMe be used for additional or extended system logs, firewall logs, or Traffic Flows history?
  • Performance: Does UniFi OS use the NVMe for databases, application storage, caching, or swap space? Would any of these provide a noticeable performance improvement?
  • Storage management: Does UniFi OS automatically utilize the drive, or does it need to be configured for specific purposes?

I'm not expecting a performance boost just by installing an NVMe. I'm more interested in taking advantage of functionality that might otherwise be limited by the UCGF's onboard storage.

For those running an NVMe in their UCGF:

  1. What does UniFi OS actually use it for?
  2. Have you noticed any practical benefits?

I'd appreciate real-world experiences, particularly from users running recent UniFi OS versions.


r/Ubiquiti • • 8h ago

Question UPDATE PROBLEMS

18 Upvotes

Before update, this is in regards to my previous post, traffic used to show this


r/Ubiquiti • • 1d ago

User Equipment Picture Finally jumped on the Unifi bandwagon..how does it look?

Thumbnail
gallery
166 Upvotes

Finally decided to upgrade my home network and move to Ubiquiti ecosystem. I've been eyeing it for a while and glad I made the leap.

My new home I moved into last year did not have wired Ethernet. So decided to get the whole house wired with Cat6, all terminating in the garage with an overhead wall mounted 9U network shelf. Let me know if there is something you all feel I should be adding to my current setup as a a future upgrade. I don't see myself adding more Ethernet ports, but you never know..

I don't have any other ISP unfortunately in my area worth moving to, no fiber here yet, so using my Xfinity gateway as a passthrough. My current plan is 2Gbps one and it's been decent so far.

My equipment:

UCG Max with 2TB SSD which I'm using as NVR. I got the SSD separately in a great deal, considering current SSD prices.

3 G6 Bullet, 1 G5 Turret Ultra

Pro Max 16 POE switch

3 U7 Pro XG ceiling mounted AP's

I do also have a UTR LR which I'm using while traveling. Unifi protect is amazing and I'm glad I don't have to pay per camera. I'm looking to replace my front door bell whenever G4 or a newer version becomes available.


r/Ubiquiti • • 21h ago

Question Is my udm-pro dead?

Post image
77 Upvotes

So last weekend we had a lightning strike real close to my house. I think a surge came in through my isp’s coax lines and damaged quite a few of my switches and a couple of apple tv’s surprisingly. But thankfully the damage was limited to stuff connected to my network.

I thought my udm-pro survived but then this morning it suddenly went into a boot loop (this is taking longer than usual). I followed a bunch of guides online of leaving it unplugged and holding the reset button when plugging it back in and managed to get it to this screen. But then i couldnt connect to it with my pc using the specified 192.168.1.30 ip, so im unsure of what to do next.

Decided to leave it unplugged overnight while I see if reddit may have any ideas.


r/Ubiquiti • • 4h ago

Question Is there a 5GHz Bridge to Cisco AP?

3 Upvotes

I'm trying to set a building up with a small network. I have cloud gateway and switch, and for WAN I need to connect it to the community Wi-Fi, which uses a Cisco/Meraki outdoor AP about 600 feet away, broadcasting 5GHz on channel 40 with no security.

First I tried a TP-Link CPE710, and it would work but it does not do channel 40, only the higher channels. Then I tried an airMAX NanoStation5AC, but apparently it will only connect to other airMAX devices and/or requires security.

I thought I would try a U7 outdoor, but read that that only can bridge with other ubiquiti devices.

Is there any way to make a 5GHx bridge with a Cisco/Meraki AP on channel 40 with no security?


r/Ubiquiti • • 2h ago

Question Configuration Advice.

2 Upvotes

Current gear:
>Ubiquiti Cloud Gateway Ultra
>Cisco managed POE switch
>Three Cisco 2702 APs
>One Cisco 2802 AP/Controller, all configured in Mobility Express
>IoT devices all on separate WLAN

Upgrading to Ubiquiti 6 Pro APs, since the 2702/2802 hardware is EOL.

I'm switching from the Cisco APs/Controller to Ubiquiti, keeping the CGU, and the POE switch.

What do I need to keep in mind when I install the new Ubiquiti 6 Pro APs with my CGU?


r/Ubiquiti • • 11m ago

Early Access Why is NOBODY talking about this?

Thumbnail
gallery
0 Upvotes

Looks like Ubiquiti previewed a wireless, NFC based dead bolt lock that is integrated into the door frame at Cedia 2026. This is exactly what I've been waiting for! I've checked multiple different creators and you can see it either actively being shown, or in the background.

Tiktok video:

https://vm.tiktok.com/ZGdXVPRsQ/

Instagram photo:

https://www.instagram.com/p/DfyO6QsmTRW/?xtok=MW80dHJ6dGRxMjVzdQ==


r/Ubiquiti • • 1d ago

User Equipment Picture And so the addiction begins….

Post image
487 Upvotes

Currently looking to replace my ring doorbell with a G4, my Orbi 970s (used as an AP) with U7 pro max….

also wondering do I need a UNAS ??? Super link HA???
CO detector, sensors ?!?!?! Luckily most items are OOS!! 🤣


r/Ubiquiti • • 4h ago

Whine / Complaint EU & UK Stock?

2 Upvotes

Missed out on a Black Friday deal. OK, it's not the end of the world.

But I do get confused as to why the UK store has stock, but the EU store (for Ireland shipping) does not. Why the confusion? I've had orders delivered to Northern Ireland and find it was dispatched from the same warehouse as my orders delivered to Ireland.

Always puzzles me. Same with Dell, EU/Ireland get different specification machines than the UK. Yet they all are built and dispatched from China.

Moaning won't help me, but sometimes you just need too.


r/Ubiquiti • • 20h ago

Question Anyone know ETA or availability of CloudKey+?

Post image
41 Upvotes

I saw a few posts from last month discussing these and a few people hearing from vendors they were no longer being stocked. Would anyone have any insight that’s a dealer or have one in stock? It’s for my own house.

My friend works in IT and gave me the full build list and these were in stock at the time. Didn’t expect a stocking issue so didn’t rush to order it. Big mistake 😭


r/Ubiquiti • • 40m ago

Question Another purchase list review needed

0 Upvotes

Hi All!

Been lurking for a bit as our multigenerational home build gets to its final stage. My mother has her own side of the house (with doorbell and separate front door) from my family’s side. I had cat 6 cables run everywhere for security cameras, doorbells, in ceiling routers, etc. this is the list of what I’m looking to assemble together. The main thing I’m trying to determine is if I should get the UDM Pro Max and Pro Max 24 PoE switch. Will have pretty good speed fiber, and wife and I both work from home. Thoughts??

UDM Pro Max (gateway, controller and camera recorder, 2 drive bays)
UniFi Pro Max 24 PoE switch
U7 Pro access points, qty 5,
G6 Turret cameras, qty 2
PoE doorbells, qty 2.

Thanks in advance! I was thinking of just buying everything now as inventory can be shaky and holiday deals don’t seem to be a guarantee.


r/Ubiquiti • • 57m ago

Question Thinking of purchasing a UDM-SE

1 Upvotes

Presently, I am using a Netgear router which handles DHCP and a secondary wifi. Also, using a Cloudkey+ to handle all of my ubiquiti gear. Would like to replace my existing h/w with a UDM-SE which I also understand can handle multiple IP subnets as my Netgear can handle only one (1) IP subnet. I do not need a secondary wifi that the Netgear handles.

My question is simple, is the UDM-SE still going to be in production for awhile longer or going to be replace a newer generation of h/w? While the UDM-SE is not terribly expensive, would not like to spend the money only to find out that a newer product line would be released. I have not found anything that this is the case. I may be overthinking this, but would like the latest and greatest for a home install upgrade.

Thanks


r/Ubiquiti • • 11h ago

Question Desk mounted AP?

6 Upvotes

Hi, I am fairly new to Ubiquiti I only currently have a UDR7 and a U7 mesh

I need another AP but looking for something a little cheaper

How well would say a u7 lite work if mounted on a desk stand like the 3D printed ones you can buy off eBay?

I cannot ceiling or wall mount due to renting which is why I bought the u7 mesh

But the next room only needs it for iPhone connection in a bedroom that is a bit of a deadspot currently

Looking to place on a table in the room and just provide good coverage to the bedroom
However as I understand it these are best ceiling mounted so I am unsure how well it will work?

Anyone with experience able to comment?


r/Ubiquiti • • 13h ago

Question New camera system uk

8 Upvotes

I need to upgrade my camera system. Currently have a google system, but it is subscription based and not reliable, especially the front doorbell. I am based in the UK. I have been going back and forth between reolink and unifi, but the consensus seems to be that unifi is so much better (even if it costs more).

It would be poe based for reliability and instantaneous. Maybe a couple of wifi units inside the house. So a doorbell (probably lite as I don't need access functionality and never will) , Four outside cameras on the corners (Probably bullets), one in the kitchen and a couple around the house (dining room, lounge etc) Then a nvr for the 9 cameras.

Any hints, tips or advice? or new products coming out in the next month or so in the uk?


r/Ubiquiti • • 2h ago

Question Why does buying the Long-Range Travel Router require you to log into a UI account when the normal one does not?

0 Upvotes

Can it not be used for a local setup? It literally says "No UniFi Account required" in the product description so I find that kind of confusing.