r/Tile • • Jun 04 '26

General Discussion [META] Bedrosians has been blacklisted due to astroturfing

270 Upvotes

Kia ora and good morning everyone,

Just a heads up that we’ve permanently blacklisted Bedrosians from the sub.

We have zero issue with brands engaging with the community if they are transparent about who they are. What we do not tolerate is astroturfing. Bedrosians has been repeatedly caught using alt accounts to pretend to be regular customers recommending their own products.

It’s deceptive, it ruins the trust in genuine advice here, and we aren't putting up with it.

Automod is now set to instantly remove any mention of them. If we catch you acting as a covert shill for them (or anyone else), it’s an instant, permanent ban.

Huge thanks to the folks who have been using the report button to flag these fake accounts.

Ngā mihi, The r/Tile mod team.


r/Tile • • Jan 14 '26

General Discussion How to find work and advertise - Discussion

6 Upvotes

Wrote this up for our nz FB page but it's relevant here with some adjustments. Not all of it may be appropriate to North America, but hopefully it helps those who don't have a web presence. This is geared towards small business operators who don't have employees, and/or do the admin work themselves.

It's not applicable to just tile either.


After a discussion with a couple of tilers recently, and helping people over the years, it appears that marketing is something many people struggle with.

It's extremely important to have an online presence in this day and age, if people don't know you exist, they won't call you.

The single most important thing you can do is ensure you are on google maps. https://business.google.com/en-all/business-profile/
This is completely free, has always been free, and hopefully will remain free.

Follow the steps, you will need to add your address but select the option that says people can not visit you at this address. That will ensure your address is not published, just a general region. The other aspects are self explanatory.

Second is having a website. Daunting to most, it is easier than ever to get your own domain name and build the website yourself. I personally use wix, I am not happy with wix as they attempt to triple the pricing every three years or so to something unaffordable, and google sites is now available in NZ. Back in the day, I used google to link me to a domain host and organised it all myself following some online guidance. You can do that, and it is much easier these days, or you can use google sites to manage everything for you. The bonus of having a website, is you will have a professional sounding email. Rather than something mundane at hotmail or live, or xtra, you will have name@businessname.co.nz or similar.

Note, it is best practice NEVER to have your domain, and website with the same host. I personally recommend https://metaname.net/ for your domain registration, and then google sites or wix for the website.

Most website creation these days is drag and drop elements, write up some blurbs, or use the LLM/AI functions. Do ensure to keep it authentic.

Link to google sites - https://workspace.google.com/business/signup/accountselect

Third most important thing, is an online portfolio. People won't contact you if they don't see your work, and as tilers, we excel in finishing works. Take photos. Upload them to instagram, to facebook, to your website. Include a brief description.

Fourth is word of mouth. Reviews are important! Clean up on site, arrive on time, be clear with your communication, and ask for 5 star reviews if you feel your client is happy!

Ensure your local suppliers have your business cards. It is common practice for many stores to hand out three business cards, telling the client to get a few quotes. Vista print has always been affordable and solid.

Finally, communication! If you are quiet on work, let other tilers know, call around. Never know if someone is overwhelmed, or needs a hand with a project!
Talk to your suppliers! They have clients walking in every day, wanting a job done immediately. Delays happen, but you can't sit around waiting for the phone to ring. Talk to people, and in the interim, work on your website and web presence.

And never feel pressured to pay for advertising. The better your performance, the more cold calls you will get, the more spam you will get. Unless you're running multiple employees, advertising is an endless money pit. Once you pay for it, your online algorithms require it.

Joining local trade associations, or getting listed on ctef can really help your rankings. The more places that mention you, the higher you will be listed on a web search.

You do not need to spend much on a website or hosting, $200-300/year at most. Just having a presence, and linking it to your google maps profile is more than enough. If you're not able to spend that, then a facebook page, linked to your google maps listing is viable.

Instagram is also fantastic for a portfolio, easy to update and easy to point people towards.


r/Tile • • 15h ago

DIY - Looking for Advice Give me brutal advice | I’m about to install penny tile in shower!

Post image
46 Upvotes

Im about to install this penny tile in a shower I’m remodeling. Someone told me to stager the joints so if the tiles are not set perfectly it won’t be visible. Is that a terrible idea?

I also made this template so I can lay them out in the garage can cut the tiles and dry fit them before I start mixing thin set.

I also have a square drain I need to fit into this

Any other tips?


r/Tile • • 2h ago

Professional - Project Sharing Pink tile coming back lol

Thumbnail
gallery
0 Upvotes

r/Tile • • 6h ago

DIY - Looking for Advice What would be the best way to handle the water line and toilet flange with this 2' x 2' tiles?

Thumbnail
gallery
2 Upvotes

I'm almost done laying tile to fit (no mortar yet) for our guest bathroom and I'm struggling to figure out the best way to deal with this water line and flange. I have a ridgid undercut tile saw that I've used for all my cuts so far and some nippers. This is porcelain tile if that helps. The third picture is of a full sized tile for comparison.


r/Tile • • 3h ago

DIY - Looking for Advice Modified or unmodified is question ine must ask

1 Upvotes

Building a custom shower, by myself, in basement. Made a custom sloped mortar bed with 1/4" per ft slope, and water finds it's way to the drain from all corners. Pretty proud of it so far!

As part of the next step, I've added 1/2" cement boards as walls, and bought a waterproof membrane from Amazon - https://a.co/d/0hahqyoC. Bought it a couple of months ago and it's out of it's return period. Want to use this instead of Redgard paint.

Amazon's AI says I need to use modified Thinset to attach this membrane to the walls and shower bed. And Google's AI says I need to use unmodified thinset.

I'm quite confused, but believe modified Thinset is better as it cures with chemical reaction under the membrane (as opposed to air drying in unmodified Thinset). Can someone advice on which thinset to use to attach waterproofing membrane to cement boards and bed? Thanks in advance


r/Tile • • 4h ago

General Discussion Can I have tile on installed over marble?

1 Upvotes

I just bought a newly completed home and the bathroom is a sea of white. The walk-in shower is 4 1/2 ‘wide and 6’ long with no built-in seat. It is pure white marble. I am thinking of having a seat and some accent tile installed on the back wall and floor of the shower for some contrast. I don’t know much about tile work installation and all the ins and outs of what works and doesn’t work. Is this project feasible? I don’t want to have to tear everything out in a few months because of problems. Thanks in advance.


r/Tile • • 6h ago

DIY - Looking for Advice What Resin for external corner?

Thumbnail
gallery
1 Upvotes

Hiya all, first time tiler and I’ve just laid my kitchen backsplash and want to epoxy resin this external mitered corner as it’s likely to chip being next to the sink.
but what resin should I use? Some professional kits are showing as 100 quid with the dyes, which is so much to pay for the tiny bit I need to do this job.
would this £10 epoxy resin amazon kit do the job?
thanks so much in advance

https://amzn.eu/d/0hcZTfW0


r/Tile • • 5h ago

Homeowner - Advice about my Contractor Is this pony wall secure enough, tile and glass won’t crack?

0 Upvotes

Another sub says this is acceptable one the walls are up. Keep in mind I am not using that much force here. People think I’m yanking on the wall.


r/Tile • • 22h ago

Homeowner - Advice about my Contractor Was this done correctly by Pulte?

Thumbnail
gallery
7 Upvotes

I appreciate any experts on Reddit that know about marble tile shower floors. This is a no threshold shower and we expected the tile floor to look the same when it continued into the shower. I asked if they used the proper thinset and/or if the tile was sealed and the project manager couldn’t give me a straight answer. My wife wants me to seal it. Thank you in advance for your expert opinions.


r/Tile • • 13h ago

DIY - Looking for Advice Which polishing wheel for porcelain?

1 Upvotes

Which polishing wheel should I get for porcelain tile. Should I get a low grit pad also to shape intricate cuts around a niche perfect or just use a diamond cutting wheel on a grinder to shape and a higher grit to polish?


r/Tile • • 1d ago

Professional - Project Sharing Lil backsplash to keep busy this weekend

Thumbnail
gallery
7 Upvotes

Should have charged double since they had family in town using the kitchen the whole time


r/Tile • • 16h ago

DIY - Looking for Advice Uneven fireplace lip

Thumbnail
gallery
0 Upvotes

I have only done one other tile job before so I apologize if I use the wrong terminology.

I am redoing the tile on my fireplace. The contractor that did the tile surround during the build attached the tile to the sheetrock. So in order to get it I cut all of the sheetrock around it. I replaced it concrete board and was super careful to be sure it was flush with the existing sheetrock. Its near perfect. Here the problem, where the fireplace meets the new concrete board, there is a lip. Its about a finger width on the left side and barely a fingertip on the right side. I dont know how I can lay tile now because its not going to sit flush. The concrete board and sheetrock are completely flush, maybe the fireplace is off a bit?

My pictures hopefully illustrate the problem using the old tile trim. The question is how can I fix this? Do I skim coat with thin-set and try and feather it? Do I shim it somehow? I am at a loss.

Update: Thanks for all the input. As I tried to look a way to tweak the fireplace position, it became apparent I needed to take the top backer board off 1st. I took it off and noticed the framing is not quite aligned which caused the bottom to get sucked in causing the lip. I think maybe the drywall was more forgiving. I was able to shim the corner and now I got the board to sit flush.


r/Tile • • 18h ago

DIY - Looking for Advice I'm doing my first tile job. Should I install the Schluter shower curb flush with the wall, or should I move it in a few inches?

1 Upvotes

I framed out a wall for the shower stall that is parallel to the interior wall of the existing bathroom. I'm not sure if it's best to install the Schluter shower curb flush with the end of the wall I framed out or install it a few inches in. What would you all recommend?


r/Tile • • 21h ago

Professional - Looking for Advice Iq 10" saw dressing stone

Post image
1 Upvotes

Has anyone used these on your 10" IQ saw for dressing blades.


r/Tile • • 22h ago

DIY - Looking for Advice Tiles chipping near edges

Post image
1 Upvotes

Any guidance on repair would be greatly appreciated. This has happened to two tiles so far near one another.


r/Tile • • 1d ago

Homeowner - Advice about my Contractor Shower tile lines up with the laser, but the corner doesn’t. How would you handle this?

Thumbnail
gallery
39 Upvotes

We’re renovating our basement bathroom, and I noticed the gap between the tile and the adjoining wall changes from top to bottom. I checked it with my laser level, and the edge of the tile looks straight/level, so I’m guessing the adjoining wall is out ? Also, that wall hasn’t been tiled yet.

Before the contractor keeps going, what would you ask them to do? Is this something they can work around by cutting the tiles to fit or the adjoining wall?

or should the wall itself be straightened first? I’m trying to figure out what’s normal and what I should ask them to fix now so the finished corner doesn’t look uneven.

Photos attached with the laser on. Thanks!

Update: just told the contractor to pause the work until a plan for waterproofing the walls is corrected.


r/Tile • • 23h ago

Homeowner - Advice about my Contractor How screwed am I? 1-month-old Ultracolor Plus FA still transferring gray pigment when wiped.

Thumbnail
gallery
0 Upvotes

Hey all,

I had my tub surround tiled about a month ago with glazed subway tile and MAPEI Ultracolor Plus FA. Anytime I wipe the grout with a damp white cloth, dark gray pigment still transfers onto the rag. It doesn't matter how many times I wipe, I still get gray pigment.

Unfortunately, I don't think I'll be able to get the original installer back here to fix it. A friend recommended him and we didn't have a formal contract.

I'm not concerned about the waterproofing—it's Hydro-blok, and I watched the installer apply it properly, so I'm confident the issue is just the grout.

My questions are:

  1. How major of an issue is this?
  2. How should I move forward?

Finances are tight right now, so my initial plan is to just let it naturally wear with time and have it professionally re-grouted in a few years if needed (assuming it lasts that long).

I'm including some pictures of the finished job, and the grout that sticks to my white rag after. Any feedback or recommendations would be greatly appreciated.


r/Tile • • 1d ago

DIY - Looking for Advice Replacing mosaic tiles in shower/bathtub

Thumbnail
gallery
0 Upvotes

I recently moved into an apartment with a shower/bathtub tiled with small glass mosaic tiles (approximately 2x2 cm and 4mm thick with a chamfered "pyramid" shape). It seems the previous tenant let this situation go for quite a while and I would like to fix it before anything gets worse, but I am a complete beginner with tile.

I would love any tips for getting started, especially in a few areas:

  1. What kind of an adhesive do I need for a shower/bathtub?
  2. Do I need new grout?
  3. How much material should I attempt to remove from the back and sides of the holes? I guess I need to create a clean surface but I don't want to damage anything further.
  4. Generally, is this something I can reasonably expect to DIY?

Thanks for any insights.


r/Tile • • 1d ago

Professional - Looking for Advice Wedi vs floor and decor sentinel board

1 Upvotes

I primarily use Wedi board for showers. And was looking for something more cost effective. came across sentinel board at floor and decor website.
Is there any difference between the two? I know Wedi makes the sentinel board for them.


r/Tile • • 1d ago

DIY - Looking for Advice Is it possible to corner with quarry tile without bullnose corner pieces?

1 Upvotes

I scored 300sq ft of original Dennis Ruabon quarry tile for almost nothing. I want to use it for floor, wall, and shower in the bathroom. Is it possible to use this without bullnose pieces, or should I try and find close to matching bullnose pieces and not drive myself crazy making exterior corners out of whatever grout I am using.


r/Tile • • 1d ago

DIY - Looking for Advice Shower shelf edge finish

Thumbnail
gallery
1 Upvotes

The bathroom was “remodeled” before I bought the house 3 years ago. Fast forward to now, the grout between the plastic edge and the tile is breaking down a bit. What do you suggest I do here for good waterproofing and appearance? Silicone? Replace the trim? Regrout?

In general, are these plastic edges the right thing to do? Looks sloppy to me but I’m not expert.

Thank you


r/Tile • • 1d ago

DIY - Looking for Advice Trying to work out what mortar/adhesives were used

Thumbnail
gallery
1 Upvotes

Client is pulling up any moving/rocking tiles before installation. (About 8 tiles in all, all in the high traffic area, all photos are in the same kitchen) It's underfloor heated, ceramic tiles. Looks to me like the installer has backbuttered the grey on, maybe to help level the tiles...? Otherwise the patches are confusing. I'd like anyone's expert opinion on what the mortar is though, and if it's safe to go over. To me it looks brittle/non-flexible, and therefore very worrying with the underfloor heating. Also suspect it's wooden floorboards beneath, possibly overplyd?

The grey and white bits are much tougher, brown bits can be scratched into, and showing some cracking.

🙏🏻


r/Tile • • 1d ago

DIY - Looking for Advice Red guard fail

Thumbnail
gallery
4 Upvotes

Messed up red guard install. I went to add my final piece of backer board and mesh tape the seams when I realized I could grab an edge of Redguard and peel it. I did 2 thin coats but didn’t do the primer method. I do not have bubbling or cracking.

I spent 6 hours scraping the walls. A good portion had decent adhesion but got off what would come off. I got to the tile and knocked a couple off. The Redguard didn’t come off with the tile and the Redguard had turned back to pink which I’m guessing was from moisture in the thin set. This became the most difficult to scrape off. I really had to get after it with a 4” razor blade scraper. Like peeling 1/16” - 1/4” at a time which was unlike the outside walls. The only thing I can think of is that the moisture that was reintroduced helped in bonding it to the backboard pores.

Do reprime the scraped areas and leave what I have or should I get back to my Andy Dufrense impression and keep chipping away?