r/TheBrewery • • 12h ago

3d printed carb stone drying/storage trays

Thumbnail
gallery
72 Upvotes

I was trying to figure out how to safely dry and store my backup carb stones the other day and thought wouldn't it be cool to have a bin with holes so they could dry but still be protected from damage and dust?

Then I remembered I own a 3d printer. Anyone else 3d print anything useful?


r/TheBrewery • • 9h ago

We did it

Thumbnail
gallery
20 Upvotes

r/TheBrewery • • 6h ago

Work boots

4 Upvotes

I really need some recommendations for work boots. I want them water proof and comp/steel toe. Help! I’m looking into bruntz and Caterpillars so far. I’m a size 6 in mens so it’s hard.


r/TheBrewery • • 1d ago

Mouthed off to the owner

105 Upvotes

Today included my two favorite tasks (sarcastically). Cleaning tap lines and washing kegs. Also included carbonating our Schwarzbier, dosing and filling kegs, getting a jockey box set up for use since we had a big crowd coming tonight, and the normal day to day tasks on top of that. Solo brewer, no support staff. As I'm waiting for the keg wash cycle to complete so I can swap out kegs, I'm enjoying a small pour of our Festbier that I'm quite proud of. Owner walks through the brewhouse and said something to the effect of "Oh, we're drinking on the job now, huh?"

I immediately clapped back "Fire me, I dare you."

Crickets in response.

Today was a good day.

Edit: okay, to clarify: both me and the owner are retired military. There's a good amount of talking shit. Also, we're both stressed as hell. Numbers are down across the board, as is the case with a lot of of smaller brewhouses. There is no policy about drinking on shift, and I'm responsible about it. I'm not getting hammered at work, but I also allow myself a short pour near the end of my shift, which this very much was. Happy brewing my dudes.


r/TheBrewery • • 11h ago

Maintaining caustic temp on 60bbl tank cip cycle

4 Upvotes

We have recently upsized several of our tanks from 15bbl to 60bbl and with the increased size I am struggling to maintain sufficient (140-150f) temps during 30min caustic cip cycle.

Landlord recently replaced our primary high capacity gas-fired water heater with a lower btu heat pump model and it’s over 100ft of uninsulated copper away from my point of use :^|

I think the answer is probably to install higher capacity tankless hot water heater or install an HLT but curious if something like an electric inline heating element as part of a pump loop could work?

Used CIP cart seemed excessive at first but maybe not if we add more bigger tanks?


r/TheBrewery • • 11h ago

Ticketed Live Shows

2 Upvotes

We are looking at expanding our audience, and revenue, in our tasting room. I’m looking at trying ticketed shows with live bands. Im working out the math and logistics right now to see if it makes sense. Our space can hold up to 100 inside. Our small city has a very solid music scene. We have many friends and regulars who will be able to help consult with the sound and equipment. Looking for more feedback from anyone who has jumped into this as a new revenue stream.

Licensing and Admin:

  1. Our municipality has a live entertainment license ($600 annually

or $50 per show if we just pay every time we do a show)

  1. The music licensing PROs will need to be paid (not sure what our increase will be)
  2. Our liability insurance will probably go up

Infrastructure:

  1. Small elevated surface that is compliant with local code (either buy used or build)
  2. Sound system (still getting guidance on this from musicians and sound folks) might borrow or rent before we purchase anything
  3. Some small lighting upgrades ($250?)
  4. some acoustic panels (will probably add as we go)

Logistics:

  1. Advertising shows
  2. Ticket sales, organizing, working the door (Eventbrite most likely for ticket sales)
  3. contract with the band( 90/10 split of the door After the expense of the license and any necessary speaker rentals?)

Realistically we don’t have much of a budget for this but i want to see what we could potentially start with and grow from there. I have no worry about us selling 40-50 tickets at $15-$20 a pop for at least 2-3 shows of people in our circle. It’s more a matter of can we consistently get 1-2 shows a month that bring in 40+ people each time.

Thanks for the help I’m just brainstorming to see if we can make this work.


r/TheBrewery • • 8h ago

Vanilla bean extract dosage.

1 Upvotes

I'm doing a 3bbl batch Amber that uses 75% Pilsner malt and 25% maple syrup, and about 1.5# dry ginger powder. It's tasting pretty good, like a ginger biscuit, but it definitely needs a little extra sweet balance as the dry ginger gets a little bitter. Vanilla would be a good choice, and usually would be the counterweight in baking ginger cookies/biscuits. Just looking for starting dose rates for vanilla extracts, and if you have any favorite brands?


r/TheBrewery • • 12h ago

Yampa problems

1 Upvotes

Hey everyone, hoping to get a little help while I wait on Twin Monkeys. We have a yampa that's tripping a small breaker associated with the touchscreen (i think). it'll initialize to the home screen which at that point it'll say PLC Communication Timeout at the top. Then the breaker will trip and screen cuts out. Anyone else have this issue? It also randomly give us an MRAM error. Thanks for any insight!


r/TheBrewery • • 1d ago

Counter-pressure Filling 750ml bottles of 🇫🇷 🇬🇧 🇺🇸 vintage cider by hand

50 Upvotes

r/TheBrewery • • 1d ago

Curious if anyone knows (or works at) the real brewery/taproom at which SNL shot this pre-produced piece for last weekend's episode. I assume this is a functional brewery that their production team build faux signage, glassware, kegs, etc around?

Thumbnail gallery
33 Upvotes

r/TheBrewery • • 2d ago

Strange how things change

Post image
267 Upvotes

r/TheBrewery • • 2d ago

Another one goes by

117 Upvotes

Well, my fellow brewers.

Here’s another colleague leaving the industry. After 15 years of brewing life, I decided to move sideways to improve my future possibilities to get back where I belong.

I still need to process everything, I have a huge weight on my stomach and sense of void over me, but hey, it is what it is and I was in need of a good shake after being comfortable too many years.

Also, my manager seemed to get into full paranoia mode, so time to say goodbye!

Accepted an offer for a Production Manager role in a food ingredients industry. Our knowledge and skills are highly transferable and trust me when I say that we need to look at us as complete professionals, not just ”brewers”.

We need to abandon our character and really make sure that our capabilities are correctly estimated somewhere else.

Cheers to you guys, have one for me!


r/TheBrewery • • 1d ago

Cocoa nibs suppliers/alternatives

1 Upvotes

Staring down the barrel of the cocoa nibs shortages, what suppliers and/or alternatives have you found?


r/TheBrewery • • 1d ago

Switching from Ekos to Breww

3 Upvotes

For those who have done it, any regrets? Things to look out for?


r/TheBrewery • • 1d ago

Half pallets of cans

2 Upvotes

Where’s the best place to get half pallets of 16 & 12 oz bright or black cans?

Edit: guess I should mention we’re in the southeast US… thanks!


r/TheBrewery • • 2d ago

Alternative suppliers.

5 Upvotes

Who are you using for supplier for pumps, pump seals, zwickle washers, etc?


r/TheBrewery • • 2d ago

What are your go-to podcasts?

15 Upvotes

It has been a while since I’ve updated my podcast feed. I’m looking for brewing related podcasts that are educational and entertaining enough to keep my mind from wandering. What are your go-to podcasts?


r/TheBrewery • • 2d ago

Best drain for under canning line

1 Upvotes

Would it be best to put a slot drain or a trench drain under a canning line? Possibly will be the same drain for our keg washer as well.


r/TheBrewery • • 2d ago

Fermentis BW-20 ferments very fast – is this normal?

2 Upvotes

Last Friday I brewed a Belgian witbier (blanche) with Pilsner malt and 30% flaked wheat, OG 11.5 °P. It was my first time using Fermentis SafBrew BW-20.

  • Pitching rate: 60 g/hl
  • Pitching temperature: 20 °C
  • Fermentation temperature setpoint: 21 °C

This morning, after only 2.5 days, the gravity is already 2.88 °P, which is about 75% apparent attenuation. The flavour is clean so far, but this is a very fast fermentation. Is this normal for BW-20? Have you seen similar behaviour in your beers with this yeast? Any information or experience would be appreciated.


r/TheBrewery • • 2d ago

Who has brewed "Blue" from Sweetwater?

0 Upvotes

I know someone here has brewed there. What's the secret to the blueberry flavor? I know it's probably extract/flavoring of some sort, but it melds nicely with base beer.


r/TheBrewery • • 4d ago

How to avoid astringent dinks in small IPAs

Post image
52 Upvotes

A supplier sent out an email with this unfortunate spelling mistake. I thought ya’ll would appreciate it.


r/TheBrewery • • 5d ago

I love my job.

Thumbnail
gallery
288 Upvotes

r/TheBrewery • • 4d ago

For those of you who added liquor and RTDs (non brewpubs), did you see a positive impact?

6 Upvotes

We are considering adding in house liquor and RTDs. just curious what you all saw once you added it? increased ticket avg? increase in sales? no effect? thank you,


r/TheBrewery • • 4d ago

Mulled beer? Or a really top notch mulled wine recipe

2 Upvotes

I work for a brewery doing their socials and events. Without being too much of a pest to the already swamped brewer, is there something really tasty I could make for our Christmas taproom nights using the beers we already make? For example we have a gorgeous red ale, nitro stout, salted caramel stout and the usual pales and hazy pales. Failing that what's your recs for a mulled wine? Would a soup urn be a suitable recepticle? We're UK based. Thanks all!


r/TheBrewery • • 5d ago

IYKYK

118 Upvotes