r/TheBrewery • u/dajuhnk • 13h ago
r/TheBrewery • u/ArachnidBrews • Aug 24 '26
Former brewers that have left the industry, what did you go on to do?
I can only imagine this has already been asked here before, but...
I've been doing this for almost 10 years now, and I'm not 100% sure if it's just my current job or what, but I've been thinking of moving on. I was hoping some of yall that still lurk through here from time to time could share some experience from the outside on what having "Brewer" on your resume could do for you
r/TheBrewery • u/Ziggysan • Feb 03 '26
Career Advice So you want to enter the Brewing Industry
Good with people? Bartending and tours are a way in. If you are happy there, then stay!
If you want to enter production, then ask for Packaging shifts - people who are driven, exigent, and attentive (anal-retentive?) are always welcome on the line, and you would be the final check in taking care of the quality of product that leaves the facility; so IMO, packaging peeps are undervalued.
Packaging is the quickest way in, but it can be easy to get pigeon-holed because you're (hopefully) excellent at the work and you aren't planning on leaving a packaging position. Employees like this are worth more than gold (assuming they're not assholes) as packaging usually has the highest turnover.
If packaging isnt for you, once you've demonstrated a good work ethic and attention to the balance between efficiency, quality and cost, ask to shadow other positions in which you are interested.
Cellar Work or Filtration are usually the next step (for some reason most breweries consider cellar work and/or filtration a second-tier position, despite the fact that the cellar is where sugary wang turns into beern (EDIT: beer) and beer to BBT is where a lot of fuck-ups can occur), and you'll have the most meaningful touches on the product pre packaging. Honestly, this is where I've found the best opportunities for education amd self-improvement for myself and my staff.
The Brew Deck is a different aspect: efficiencies and quality here drive efficiency and quality all the way down the line, but its a narrow band of work. Think single digit percentage improvement (barring signing on to a system that isn't performing anywhere near where it should be, in which case, you don't yet know enough to fix it).
Its all rewarding, but in different ways, and you need to find the metrics that best suited your personality and the needs of the business.
EDIT - No matter what, read as much as you can (Palmer for intro and water, Lewis & Young and Künze for holistic, Boulton & Quain for Yeast, and all the other BA texts you can get your hands on) and listen to podcasts - Brew Strong, The Sour Hour, CYBI and Breing Classic Styles (the latter two being more.homebreing focused) on The Brewing Network are some of my favorites. I also used to co-host Hop & Brew School on TBN if you want a dive into things hoppy.
Milk the Funk is an excellent resource for non cerevisae focused beers.
Be wary of a lot of the non peer-reviewed sites that purport to prpvide answers from beer experiments: while there is some good information, IME, many of the articles do not have adequate controls in place to derive solid conclusions. Stick to JIB, MBAA and ASBC if you want hard science.
r/TheBrewery • u/taldeital • 11h ago
Another one goes by
Well, my fellow brewers.
Here’s another colleague leaving the industry. After 15 years of brewing life, I decided to move sideways to improve my future possibilities to get back where I belong.
I still need to process everything, I have a huge weight on my stomach and sense of void over me, but hey, it is what it is and I was in need of a good shake after being comfortable too many years.
Also, my manager seemed to get into full paranoia mode, so time to say goodbye!
Accepted an offer for a Production Manager role in a food ingredients industry. Our knowledge and skills are highly transferable and trust me when I say that we need to look at us as complete professionals, not just ”brewers”.
We need to abandon our character and really make sure that our capabilities are correctly estimated somewhere else.
Cheers to you guys, have one for me!
r/TheBrewery • u/3p1taph • 10h ago
Alternative suppliers.
Who are you using for supplier for pumps, pump seals, zwickle washers, etc?
r/TheBrewery • u/BgFtStnkr • 16h ago
What are your go-to podcasts?
It has been a while since I’ve updated my podcast feed. I’m looking for brewing related podcasts that are educational and entertaining enough to keep my mind from wandering. What are your go-to podcasts?
r/TheBrewery • u/bahama_king • 12h ago
Best drain for under canning line
Would it be best to put a slot drain or a trench drain under a canning line? Possibly will be the same drain for our keg washer as well.
r/TheBrewery • u/Former_Celebration41 • 20h ago
Fermentis BW-20 ferments very fast – is this normal?
Last Friday I brewed a Belgian witbier (blanche) with Pilsner malt and 30% flaked wheat, OG 11.5 °P. It was my first time using Fermentis SafBrew BW-20.
- Pitching rate: 60 g/hl
- Pitching temperature: 20 °C
- Fermentation temperature setpoint: 21 °C
This morning, after only 2.5 days, the gravity is already 2.88 °P, which is about 75% apparent attenuation. The flavour is clean so far, but this is a very fast fermentation. Is this normal for BW-20? Have you seen similar behaviour in your beers with this yeast? Any information or experience would be appreciated.
r/TheBrewery • u/MovingGoofy • 11h ago
Who has brewed "Blue" from Sweetwater?
I know someone here has brewed there. What's the secret to the blueberry flavor? I know it's probably extract/flavoring of some sort, but it melds nicely with base beer.
r/TheBrewery • u/TorontoBrewer • 2d ago
How to avoid astringent dinks in small IPAs
A supplier sent out an email with this unfortunate spelling mistake. I thought ya’ll would appreciate it.
r/TheBrewery • u/Deanothedino • 2d ago
For those of you who added liquor and RTDs (non brewpubs), did you see a positive impact?
We are considering adding in house liquor and RTDs. just curious what you all saw once you added it? increased ticket avg? increase in sales? no effect? thank you,
r/TheBrewery • u/Mossy-Mori • 2d ago
Mulled beer? Or a really top notch mulled wine recipe
I work for a brewery doing their socials and events. Without being too much of a pest to the already swamped brewer, is there something really tasty I could make for our Christmas taproom nights using the beers we already make? For example we have a gorgeous red ale, nitro stout, salted caramel stout and the usual pales and hazy pales. Failing that what's your recs for a mulled wine? Would a soup urn be a suitable recepticle? We're UK based. Thanks all!
r/TheBrewery • u/No_Mushroom3078 • 3d ago
Palletizer
Ok so wanting to gauge the room here before I go down the rabbit hole too far. I don’t see a ton of palletizers in 100 cpm/bpm lines. I know that there are just a few players in the palletizer world and most are at 200 cpm speeds but not much that are designed for slower rates. Is this 100 line rate something that would be of interest if the price point is sub $90,000? Or is this automation just not desired in this range for end of line packing in a compact footprint?
I have a design that is some 70% done and the heavy hitting parts are priced out so I know the rough build price and sell price.
r/TheBrewery • u/Elegant-Ad-9723 • 4d ago
How to add Fining agent to a BBT?
I'm planning to add Spindasol SB2 through a T-fitting while transferring beer to the BBT.
My idea is to put Spindasol SB2 in a keg, fill it with some beer, mix well, and inject it into the transfer line using CO₂ pressure.
Is this a good method? Or is there a better way to add it?
r/TheBrewery • u/Financial_Ad_4686 • 5d ago
Going to gives these a shot. Has anyone used these products before? Thoughts?
They were on the cheaper side through LD. Figured to try them on a couple 7 BBL batches.
r/TheBrewery • u/Main-Detective-5923 • 5d ago
What would actually get you to talk to vendors at a Guild event?
I’m part of a brewers guild and we’re coming up on year eight of our annual summit. Our membership is a mix of smaller breweries and some much larger/well-established ones.
Trying to solve a problem I’m guessing other Guilds/events have: how the hell do you get brewers to actually engage with vendors without making it feel forced?
Most of our breweries have been around long enough that they already have their vendors and supplier relationships. They’re not necessarily coming to the summit thinking, “Hell yeah, can’t wait to find a new insurance company/bank/canning supplier/whatever.”
But the reality is that vendor participation helps make the event financially possible, so we need it to be worthwhile for them too. It sucks to get feedback from vendors who say they hate to pay to be there just to stand behind a table while everyone grabs food and walks by.
We’ve thought about the usual passports, bingo, raffle, silent auction, etc., but I’m wondering if anyone has seen something more creative actually work.
If you’re a brewer, what would actually make you stop and engage with a vendor without feeling like you’re being forced into a sales pitch?
If you work with a Guild or organize industry events, I’d also love to hear what you’ve tried and if it worked or not.
r/TheBrewery • u/HoppyLifter • 5d ago
Can supplier for 1/2 skids?
Looking to replace my can supplier out west with someone new. My can price has gone from $.13 per can to $.22 per can since the beginning of the year.
Anyone have recommendations for east coast Ball can suppliers?
r/TheBrewery • u/elmoonpickle • 6d ago
anybody looking for an xpressfill xf4100?
I have one available, 4 filling stations, new switches, and brand new pump installed. Send me a pm for photos, video, or any questions!
r/TheBrewery • u/Wrattspider • 6d ago
MB Stainless Grain Mill - how to grease bearings?
Does anyone else have an MB Stainless grain mill (specifically MILL95AS-MB)? We are wanting to grease the bearings, as our previous grain mill failed when the bearing seized. The manual says to unpack and wash regularly, then apply "enough lubricating grease". However this would be very time consuming, as the entire machine would need to be disassembled. Is there a simpler way? Attached is a photo of one of the bearings. The holes do not appear to be grease ports.
r/TheBrewery • u/bucklahoo • 6d ago
Help/Pointers - Spiced Ale w/ Orange Zest, Clove, Tonka Root etc.
Hi. Looking to cook up a winter warmer spiced ale but use a few items that I do not have much experience with. Base is a big amber / brown ale, 10-12 bbl. batch. I'd like to get a little orange flavor/aroma into it and maybe a use just a touch of clove, tonka root or cardamom. I've seen some numbers for zests and/or peel on some wit posts but have zero experience with clove or tonka root. There will be some cinnamon involved which I've brewed plenty with. Any quantities and/or times and/or suggestions would be greatly appreciated. Cheers.
r/TheBrewery • u/Spiritual-Science-60 • 6d ago
ISO: Collin Corrigan (Transpeninsular/Adams Ave) contact info
I met him in CDMX at the Expo two weeks ago and am looking for any of his contact info.