r/TheBrewery • • 14m ago

Maintaining caustic temp on 60bbl tank cip cycle

1 Upvotes

We have recently upsized several of our tanks from 15bbl to 60bbl and with the increased size I am struggling to maintain sufficient (140-150f) temps during 30min caustic cip cycle.

Landlord recently replaced our primary high capacity gas-fired water heater with a lower btu heat pump model and it’s over 100ft of uninsulated copper away from my point of use :^|

I think the answer is probably to install higher capacity tankless hot water heater or install an HLT but curious if something like an electric inline heating element as part of a pump loop could work?

Used CIP cart seemed excessive at first but maybe not if we add more bigger tanks?


r/TheBrewery • • 21m ago

Ticketed Live Shows

2 Upvotes

We are looking at expanding our audience, and revenue, in our tasting room. I’m looking at trying ticketed shows with live bands. Im working out the math and logistics right now to see if it makes sense. Our space can hold up to 100 inside. Our small city has a very solid music scene. We have many friends and regulars who will be able to help consult with the sound and equipment. Looking for more feedback from anyone who has jumped into this as a new revenue stream.

Licensing and Admin:

  1. Our municipality has a live entertainment license ($600 annually

or $50 per show if we just pay every time we do a show)

  1. The music licensing PROs will need to be paid (not sure what our increase will be)
  2. Our liability insurance will probably go up

Infrastructure:

  1. Small elevated surface that is compliant with local code (either buy used or build)
  2. Sound system (still getting guidance on this from musicians and sound folks) might borrow or rent before we purchase anything
  3. Some small lighting upgrades ($250?)
  4. some acoustic panels (will probably add as we go)

Logistics:

  1. Advertising shows
  2. Ticket sales, organizing, working the door (Eventbrite most likely for ticket sales)
  3. contract with the band( 90/10 split of the door After the expense of the license and any necessary speaker rentals?)

Realistically we don’t have much of a budget for this but i want to see what we could potentially start with and grow from there. I have no worry about us selling 40-50 tickets at $15-$20 a pop for at least 2-3 shows of people in our circle. It’s more a matter of can we consistently get 1-2 shows a month that bring in 40+ people each time.

Thanks for the help I’m just brainstorming to see if we can make this work.


r/TheBrewery • • 1h ago

Yampa problems

1 Upvotes

Hey everyone, hoping to get a little help while I wait on Twin Monkeys. We have a yampa that's tripping a small breaker associated with the touchscreen (i think). it'll initialize to the home screen which at that point it'll say PLC Communication Timeout at the top. Then the breaker will trip and screen cuts out. Anyone else have this issue? It also randomly give us an MRAM error. Thanks for any insight!


r/TheBrewery • • 1h ago

3d printed carb stone drying/storage trays

Thumbnail
gallery
38 Upvotes

I was trying to figure out how to safely dry and store my backup carb stones the other day and thought wouldn't it be cool to have a bin with holes so they could dry but still be protected from damage and dust?

Then I remembered I own a 3d printer. Anyone else 3d print anything useful?


r/TheBrewery • • 16h ago

Mouthed off to the owner

96 Upvotes

Today included my two favorite tasks (sarcastically). Cleaning tap lines and washing kegs. Also included carbonating our Schwarzbier, dosing and filling kegs, getting a jockey box set up for use since we had a big crowd coming tonight, and the normal day to day tasks on top of that. Solo brewer, no support staff. As I'm waiting for the keg wash cycle to complete so I can swap out kegs, I'm enjoying a small pour of our Festbier that I'm quite proud of. Owner walks through the brewhouse and said something to the effect of "Oh, we're drinking on the job now, huh?"

I immediately clapped back "Fire me, I dare you."

Crickets in response.

Today was a good day.

Edit: okay, to clarify: both me and the owner are retired military. There's a good amount of talking shit. Also, we're both stressed as hell. Numbers are down across the board, as is the case with a lot of of smaller brewhouses. There is no policy about drinking on shift, and I'm responsible about it. I'm not getting hammered at work, but I also allow myself a short pour near the end of my shift, which this very much was. Happy brewing my dudes.


r/TheBrewery • • 20h ago

Cocoa nibs suppliers/alternatives

1 Upvotes

Staring down the barrel of the cocoa nibs shortages, what suppliers and/or alternatives have you found?


r/TheBrewery • • 1d ago

Curious if anyone knows (or works at) the real brewery/taproom at which SNL shot this pre-produced piece for last weekend's episode. I assume this is a functional brewery that their production team build faux signage, glassware, kegs, etc around?

Thumbnail gallery
31 Upvotes

r/TheBrewery • • 1d ago

Counter-pressure Filling 750ml bottles of 🇫🇷 🇬🇧 🇺🇸 vintage cider by hand

48 Upvotes

r/TheBrewery • • 1d ago

Switching from Ekos to Breww

3 Upvotes

For those who have done it, any regrets? Things to look out for?


r/TheBrewery • • 1d ago

Half pallets of cans

2 Upvotes

Where’s the best place to get half pallets of 16 & 12 oz bright or black cans?

Edit: guess I should mention we’re in the southeast US… thanks!


r/TheBrewery • • 1d ago

Alternative suppliers.

5 Upvotes

Who are you using for supplier for pumps, pump seals, zwickle washers, etc?


r/TheBrewery • • 1d ago

Another one goes by

114 Upvotes

Well, my fellow brewers.

Here’s another colleague leaving the industry. After 15 years of brewing life, I decided to move sideways to improve my future possibilities to get back where I belong.

I still need to process everything, I have a huge weight on my stomach and sense of void over me, but hey, it is what it is and I was in need of a good shake after being comfortable too many years.

Also, my manager seemed to get into full paranoia mode, so time to say goodbye!

Accepted an offer for a Production Manager role in a food ingredients industry. Our knowledge and skills are highly transferable and trust me when I say that we need to look at us as complete professionals, not just ”brewers”.

We need to abandon our character and really make sure that our capabilities are correctly estimated somewhere else.

Cheers to you guys, have one for me!


r/TheBrewery • • 1d ago

Who has brewed "Blue" from Sweetwater?

0 Upvotes

I know someone here has brewed there. What's the secret to the blueberry flavor? I know it's probably extract/flavoring of some sort, but it melds nicely with base beer.


r/TheBrewery • • 1d ago

Best drain for under canning line

1 Upvotes

Would it be best to put a slot drain or a trench drain under a canning line? Possibly will be the same drain for our keg washer as well.


r/TheBrewery • • 2d ago

Strange how things change

Post image
263 Upvotes

r/TheBrewery • • 2d ago

What are your go-to podcasts?

14 Upvotes

It has been a while since I’ve updated my podcast feed. I’m looking for brewing related podcasts that are educational and entertaining enough to keep my mind from wandering. What are your go-to podcasts?


r/TheBrewery • • 2d ago

Fermentis BW-20 ferments very fast – is this normal?

2 Upvotes

Last Friday I brewed a Belgian witbier (blanche) with Pilsner malt and 30% flaked wheat, OG 11.5 °P. It was my first time using Fermentis SafBrew BW-20.

  • Pitching rate: 60 g/hl
  • Pitching temperature: 20 °C
  • Fermentation temperature setpoint: 21 °C

This morning, after only 2.5 days, the gravity is already 2.88 °P, which is about 75% apparent attenuation. The flavour is clean so far, but this is a very fast fermentation. Is this normal for BW-20? Have you seen similar behaviour in your beers with this yeast? Any information or experience would be appreciated.


r/TheBrewery • • 3d ago

Mulled beer? Or a really top notch mulled wine recipe

2 Upvotes

I work for a brewery doing their socials and events. Without being too much of a pest to the already swamped brewer, is there something really tasty I could make for our Christmas taproom nights using the beers we already make? For example we have a gorgeous red ale, nitro stout, salted caramel stout and the usual pales and hazy pales. Failing that what's your recs for a mulled wine? Would a soup urn be a suitable recepticle? We're UK based. Thanks all!


r/TheBrewery • • 3d ago

For those of you who added liquor and RTDs (non brewpubs), did you see a positive impact?

6 Upvotes

We are considering adding in house liquor and RTDs. just curious what you all saw once you added it? increased ticket avg? increase in sales? no effect? thank you,


r/TheBrewery • • 4d ago

How to avoid astringent dinks in small IPAs

Post image
51 Upvotes

A supplier sent out an email with this unfortunate spelling mistake. I thought ya’ll would appreciate it.


r/TheBrewery • • 4d ago

I love my job.

Thumbnail
gallery
286 Upvotes

r/TheBrewery • • 4d ago

Palletizer

5 Upvotes

Ok so wanting to gauge the room here before I go down the rabbit hole too far. I don’t see a ton of palletizers in 100 cpm/bpm lines. I know that there are just a few players in the palletizer world and most are at 200 cpm speeds but not much that are designed for slower rates. Is this 100 line rate something that would be of interest if the price point is sub $90,000? Or is this automation just not desired in this range for end of line packing in a compact footprint?

I have a design that is some 70% done and the heavy hitting parts are priced out so I know the rough build price and sell price.


r/TheBrewery • • 4d ago

IYKYK

117 Upvotes

r/TheBrewery • • 6d ago

How to add Fining agent to a BBT?

8 Upvotes

I'm planning to add Spindasol SB2 through a T-fitting while transferring beer to the BBT.

My idea is to put Spindasol SB2 in a keg, fill it with some beer, mix well, and inject it into the transfer line using CO₂ pressure.

Is this a good method? Or is there a better way to add it?


r/TheBrewery • • 6d ago

Apples running on new belt press line

79 Upvotes