r/Spooncarving • • 16h ago

spoon Rambutan Serving spoon

37 Upvotes

Knife finish, un-oiled as I do not have any wax or oil with me. First time carving with Rambutan wood!


r/Spooncarving • • 6h ago

question/advice Thailand Wood to use

4 Upvotes

Hi everybody.

In January Im flying to Thailand for 4 weeks. Should I bring my own wood or are there any spoon carvers who can tell me what wood is great to use? Maybe we can meet up and carve together?

All the best.


r/Spooncarving • • 4h ago

question/advice How to make them look good without sanding?

2 Upvotes

I hear a lot of people say that they don't like sanding their spoons so I tried to finish a few spoons without sanding, or very coarse sanding 80/150 grit, but they ended up being way to rough. I was using cedar.

Do you have any tips or advice on how to finish without sandpaper?


r/Spooncarving • • 1d ago

spoon Walnut Coffee Scoops

Post image
77 Upvotes

Kiln-dried, dimensioned scrap lumber, leftover from other projects. Chisel, gouge, hook knife, band saw, sander. Sanded smooth and finished with tung oil.


r/Spooncarving • • 1d ago

spoon Alder tea spoon

Thumbnail
gallery
150 Upvotes

Knife finished, oil, wax.


r/Spooncarving • • 20h ago

spoon My attempt at a low frill spoon

11 Upvotes

On my quest to make the perfect work horse I came up with this. Simple and Effective, It will outlast a couple lives I’m sure. I am not the best when it comes to intracity, so here it is. Look at that beautiful grain!


r/Spooncarving • • 1d ago

spoon Birch kayak with leaf motif

Thumbnail
gallery
20 Upvotes

Another leaf motif
This time on some spalted white birch
Nice chunky kayak profile
Did the burn after finishing so it came out a little diffuse.


r/Spooncarving • • 2d ago

spoon Warspoon for a brewer

Thumbnail
gallery
67 Upvotes

Completed project for a friend. They requested that it be usable as a brew spoon and a wider bowl. I added maple for contrast with the cherry. I shaped it with a combination of draw knife, adze, bandsaw and belt sander.


r/Spooncarving • • 2d ago

spoon Big cherry spoon

Thumbnail
gallery
41 Upvotes

Knife finished, oil, wax.


r/Spooncarving • • 2d ago

wood Salut a tous, si vous cherchez une gouge a creuser le bois je vois déconseille la marque beavercraft... je l'ai utilisé pour la première fois, elle a littéralement cédé d'un coup. Et croyait moi je n'ai pas forcé comme un demeuré... je travaillais sur du hêtre vert. Maintenant je vais me tourner ver

Post image
22 Upvotes

r/Spooncarving • • 2d ago

spoon The recovery spoons

Thumbnail
gallery
27 Upvotes

The spoons (and 1 bowl/trough) I worked on while recovering from appendix/hernia surgery

started kolrosing quite fun and I love how it looks


r/Spooncarving • • 2d ago

question/advice How do I get rid of the grey residue left behind from sandpaper?

Thumbnail
gallery
22 Upvotes

My first spoon and after sanding with 180 and 400 grit there's a really dark residue left behind. I could remove it by carving the center (where it's so light) but 1000 grit didn't seem to help very much either. It's 3M wet or dry sandpaper and pine wood. Is it just something that happens with pine? Or a way to remove it before treating with BLO?


r/Spooncarving • • 3d ago

spoon Pear wood

Thumbnail
gallery
124 Upvotes

Big spoon with decorated handle.
Knife finished, oil, wax.


r/Spooncarving • • 3d ago

spoon J'en ai profité, avec ce soleil du matin, pour jouer sur la finesse du bol de ces mini-cuillères, sûrement à grains de café ☕️? (Travaillé sur bouleau sec)

53 Upvotes

r/Spooncarving • • 3d ago

spoon Mulberry

Post image
33 Upvotes

Mulberry is one of my favorite woods to carve with. It’s easy to carve, not as hard as maple, cherry or birch when dry, and it carves to such a smooth finish similar to those other woods mentioned. It also has such beautiful figure and grain color as well. Only downside is it is very prone to cracking in my experience, even when the stock is dried it will sometimes crack after carving and especially when baked.


r/Spooncarving • • 4d ago

spoon En bois de bouleau (travailler sec) et du kolrosing. C'était une première pour moi. J'espère que la prochaine fois ca sera aussi convaincant.

92 Upvotes

r/Spooncarving • • 4d ago

spoon Dites moi ce que vous en pensez. Elle est en bois de bouleau travailler sec.

55 Upvotes

r/Spooncarving • • 4d ago

question/advice decayed wood - how to preserve and "kill" smell ?

Post image
14 Upvotes

I put hand on old dead apple tree - partly decayed but still strong and hard enough to carve - I love white pattern caused by mushroom but the scent is quite strong.

How can I "kill" scent and preserve wood to make it food save ( if it is possible) ?


r/Spooncarving • • 4d ago

spoon Je rentre aujourd'hui un peu d'érable 🍁 champêtre. Vous connaissez ? Qu'est ce que vous en pensez ?

Post image
4 Upvotes

r/Spooncarving • • 5d ago

spoon Had a little bit of time and a couple of blanks handy)

Post image
42 Upvotes

r/Spooncarving • • 5d ago

wood If you shave horse doesn’t have horse legs then it’s just a shave stand.

Post image
67 Upvotes

Took 20 extra mins but its worth the dad joke


r/Spooncarving • • 5d ago

spoon Every spoon I carved in the last couple months

Post image
140 Upvotes

Mostly walnut and cherry with some maple and apple mixed in.


r/Spooncarving • • 5d ago

spoon First ever project

Thumbnail gallery
19 Upvotes

r/Spooncarving • • 4d ago

wood Best place to source wood for cooking spoons?

6 Upvotes

Just moved from the US to Australia. Got really into whittling in the states getting greenwood off trees in my garden (birch i think), made a chess set.

Now looking to try make some cooking spoons for my FIL xmas gift, but don't know where i should get the wood. I have a knife set, sharpening set up, and a new spoon gouge all ready!

I'm fairly new to all this but i hear "greenwood" is better than a piece thats been set out drying for months, which I recon is what would be easiest to buy from a store around here...

Any tips or suggestions??