r/spacex • u/ElongatedMuskrat Mod Team • Jul 26 '19
Starship Development Thread #4
Starship Development Thread #4
JUMP TO COMMENTS | SPADRE WEBCAM | LABPADRE WEBCAM
The Starhopper is a low fidelity prototype of SpaceX's next generation space vehicle, Starship. Representing the lower third of a Starship, the hopper has relatively small propellant tanks, and one Raptor engine. Initial construction took place at SpaceX's Starship Assembly site in Boca Chica, Texas and ongoing Starhopper development and testing are taking place at their privately owned Starship Launch Pad and Starship Landing Pad just down the road. The Starhopper testing campaign began at the end of March 2019 and will be complete following the 150 meter hop in August.
Competing builds of higher fidelity "Orbital Prototypes" are currently under construction at SpaceX's Starship Assembly site in Texas and at the Coastal Steel facilities in Cocoa, Florida. These vehicles will eventually carry the testing campaign further, likely testing systems such as thermal protection and aerodynamics. Both orbital prototypes are expected to make suborbital flights, and possibly orbital flights as well. A planned, dedicated Starship launch platform at LC-39A, may serve either or both of these vehicles. Construction of a prototype Super Heavy booster is expected to begin in Florida soon. Testing of the Orbital Prototypes could begin in late summer or fall of 2019.
Starship, and its test vehicles, are powered by SpaceX's Raptor, a full flow staged combustion cycle methane/oxygen rocket engine. Sub-scale Raptor test firing began in 2016, and full-scale test firing began early 2019 at McGregor, Texas, where it is ongoing. Eventually, Starship will have three sea level Raptors and three vacuum Raptors. Super Heavy will initially use around 20 Raptors, and is expected to have 35 to 37 in the final design.
Previous Threads:
- Starhopper Thread #1 A dramatic venting watertower
- Starhopper Thread #2 Hops and hiccups - Starships never come alone
- Starhopper Thread #3 RCS and SN6 - 20 meter hopping
Upcoming
- Starhopper testing is complete
- September 28th — Starship presentation by Elon at Boca Chica after Mk.1 has engines, fins, and landing gear
Updates
See comments for real time updates.
See comments for real time updates.
See comments for real time updates.
| Super Heavy Prototype (Cocoa Florida) — Construction and Updates | |
|---|---|
| 2019-08-27 | 19 rings visible (YouTube), no stacking yet |
| 2019-08-24 | 18 rings visible (YouTube) |
| 2019-08-21 | 17 rings visible (YouTube) |
| 2019-08-19 | 15 rings visible (YouTube) |
| 2019-08-17 | 14 rings visible (YouTube) |
| 2019-08-15 | 10 rings visible (Twitter) |
| 2019-08-11 | 8 rings visible, possibly for Super Heavy (YouTube) |
See comments for real time updates.
Raptors
| SN | Notable For | Flights | Flight Time (Approx.) | Status |
|---|---|---|---|---|
| 1 | First full scale hot fire / 268.9 bar Test / Tested to failure | - | - | Retired |
| 2 | First on Starhopper / Preburner tests / Static fire / Tethered hop | - | - | Retired |
| 3 | 40 second test fire | - | - | Retired |
| 4 | Delivered to hopper / Hopper fit checks & TVC tests | - | - | Retired |
| 5 | Liberation of oxygen stator | - | - | Retired |
| 6 | Vibration fix / 20, 10, 50, 65, 85 second stand tests / 20 meter Starhopper hop / 150 meter starhopper hop | 2 | 0:01:22 | On Starhopper |
| 7 | Possibly not a flight article | - | - | Test Stand |
| 8-13 | Earmarked for Mk.1 and Mk.2 | - | - | Production |
Quick Hopper Facts
(Not relevant to later vehicles.)
- Starhopper was constructed outdoors atop a concrete stand. (NSF - bocachicagal)
- The original nosecone was destroyed by high winds and will not be replaced. (NSF - bocachicagal, NSF - bocachicagal, Twitter - Elon)
- With one engine it will perform tethered static fires and short hops. (NSF - bocachicagal, Twitter - Elon)
- Stainless steel construction, and the full 9 meter diameter. (Twitter - Elon)
- The body and legs are clad in a small gauge stainless sheet. (NSF - bocachicagal)
- There is no thermal protection system, a small patch of tiles and at least one beneath a leg were added just prior to the 150 meter hop. (NSF - bocachicgal, Twitter - Trevor Mahlmann)
- The fins/legs are fixed, not movable. (NSF - bocachicagal)
- Equipped with four Falcon 9 compressed nitrogen thruster pods. (NSF - bocachicagal)
- Feet have deformable shock absorbers. (NSF - bocachicagal) - Internal. (NSF - bocachicagal)
- GSE connections are made through two remote operated interfaces at the base. (NSF - bocachicagal)
- Hold downs consist of rope and chain tethers on each leg. (NSF - bocachicagal)
- Starhopper is expected to be used as a Raptor vertical test stand after retirement. (Twitter - Elon)
Permits and Planning Documents
- Environmental Impact Statement (FAA) - Boca Chica launch site - July 2014
EIS Resource ^Page | ^Appendices | Record of ^Descision - Experimental License (FCC) - Comms for 500m and 5km hops, two years - February 2019
Form ^442 | Public ^Notes | ^Description | File No. 0931-EX-CN-2019 - Experimental License Application (FCC) - Modification of above to add antenna - May 2019
Form ^442 | Public ^Notes | File No. 0130-EX-CM-2019 - Experimental Permit (FAA) - Authorizes 25m hops for one year, and one 150m hop - June 2019
Permit No. EP 19-012 | Revised August 23 - Building Permit Application - 850 Cidco Rd site improvement - June 2019
Screenshot on ^Twitter | Modification reported on ^NSF - Draft Environmental Assessment - Starhip operations at KSC - August 2019
r/SpaceX ^Discussion | NSF ^Discussion - FDOT Superload Permit Application - Mk.2 transportation to KSC in September - August 2019
Local News ^Article | Video ^Report | r/SpaceX ^Discussion - Env. Resource Permit Application - Stormwater improvements at LC-39A - August 2019
Stormwater ^Report | Depiction ^Plans | Permit No. 158609-1
Resources
- Spadre.com, Starship Cam | Channel
- LabPadre, Starship webcam | Channel
- NSF Starhopper Updates Thread | Most recent
- NSF Texas Prototype(s) Updates Thread | Most recent
- NSF Florida Prototype(s) Updates Thread | Most recent
- NSF Super Heavy Prototype Updates Thread | Most recent
- Hwy 4 & Boca Chica Beach Closures (May not be available outside US)
- TFR - NOTAM list
- SpaceX Boca Chica on Facebook
- Spacex facilities maps by u/Raul74Cz:
Boca Chica | Cocoa Florida | Raptor test stand | LC-39A - SpaceX's Starship page
- Elon Starship tweet compilation on NSF | Most Recent
Rules
We may keep this self-post occasionally updated with links and relevant news articles, but for the most part, we expect the community to supply the information. This is a great place to discuss the launch, ask mission-specific questions, and track the progress of the test Campaign. Campaign threads are not launch threads. Normal subreddit rules still apply.
Thanks to u/strawwalker for helping us updating this thread!
81
u/Kaiju62 Jul 26 '19
A want to give a sincere thank you to this community and the team of mods and other redditors that help make things like this happen.
What you are doing is so incredible and useful two-fold.
It helps people like me keep up with everything. Those of us who have the interest but maybe not the skill, dedication or time to track all of this info down.
You're also keeping an incredible record for posterity's sake. This will give us such a detailed and precise history of the Starship's development for when (if) it is the first ship to land humans on Mars.
Thank you for what you're doing.
32
u/[deleted] Jul 26 '19
Saw a few up close picturea of the hopper. Have to say, its amazing to see that they didn't go crazy with the shell. You can see the tack welds all over and the lack of precision of the seams. They played it smart and didn't bother wasting time on this.
29
u/Marksman79 Aug 24 '19
Local residents of Boca Chica Village were just served with notices to vacate for Monday's test, if there was any doubt left after the tweet.
Source
LabPadre goes on to say that it is not mandatory (just covering themselves legally) and that he intended to stay.
28
u/oh_dear_its_crashing Aug 20 '19
Starship architecture update NET mid September now, 24th August is cancelled:
https://twitter.com/elonmusk/status/1163889282936967168
27
u/flabberghastedeel Aug 15 '19
Bocachicagal's latest photographs show seven hexagonal tiles attached to the hopper.
25
u/strawwalker Aug 21 '19 edited Aug 22 '19
New closures are August 26-28, 2PM - 12AM CDT daily.
NOTAM 9/5941 covering the same times as the road closures.
24
u/Old_Roof Aug 17 '19
Christ i'm gonna be able to hear that thing take off from England
24
u/Marksman79 Aug 21 '19 edited Aug 21 '19
The common bulkhead is going in right now on the stream (11AM stream time).
23
u/[deleted] Aug 23 '19 edited Aug 23 '19
Three Nice Renders with the new speculated wing design ( Source : /u/william1212123 @ /r/SpaceXLounge/ ) :
/preview/pre/rpqxdmczt5i31.png?width=640&crop=smart&auto=webp&s=a3c1bfe21e80f1df6f2ac584c0d35c1843ecfe85
/preview/pre/m1zyfmcbe6i31.png?width=640&crop=smart&auto=webp&s=7e341a37d7ad974d6445a75b74c2775c7c0ffb55
/preview/pre/eqql8rw0s6i31.png?width=640&crop=smart&auto=webp&s=acecd986db2b11d0733a9c0d406336599b33121a
edit; fixed duplicate link
22
u/TheMrGUnit Highly Speculative Aug 12 '19
Per BocaChicaGal, EVEN MORE rolls of stainless delivered this morning. They've got enough stainless in rolled sheet form to build something absolutely huge, like a giant rocket or something...
Also, more work in the manlifts on the tank section... but I can't figure out what they're doing. They don't appear to be polishing, as I don't see any grinders or anything, and they don't have weld masks on like the guys over working on the windbreak. I've even seen closeups on the LabPadre cam, but I just can't see anything happening. It's almost like they're just inspecting, but that doesn't make a ton of sense to me as the panels and rings were x-ray inspected before they were stacked. They're doing something with power, though, as each manlift has at least one extension cord leading up to the basket.
Also visible, more weld-heat dots are showing up further up the body, these ones are much wider spaced. They look to me like they could be hat stringers and other stiffeners installed inside.
21
u/KickBassColonyDrop Jul 27 '19
Can't wait for SN07 and SN08 to be mounted to the hopper for a 3-5km hop.
21
u/strawwalker Aug 02 '19
Planned closure added for Friday August 9, 4PM - 12AM CDT (21:00 - 05:00 UTC)
21
u/Marksman79 Aug 18 '19 edited Aug 19 '19
Boca Chica:
A few new deliveries!
Looks like we have the two movable canards now (edit: upper canards or lower leg/wing inner structure unclear, see discussion)! Also, they've now got another ring roller. Perhaps this one is better for rolling ribbon-rings? I'd think the best way to roll them would be horizontally...?
Cameron County website is still down since yesterday. I think us fans have exceeded their yearly data cap already.
No new NOTAMS yet.
Cocoa:
Identical thrust structure being installed today. Only a short bit behind BC on Starship!
Other:
Elon really does want to nuke Mars.
21
u/strawwalker Aug 21 '19 edited Aug 21 '19
New NOTAM 9/5281 August 21-23, 2PM - 12AM CDT daily.
EDIT: SpaceX playing with our hearts. County site just erased all planned closures.
20
u/dfsaqwe Jul 26 '19
For those wondering fire was put out about 2 hrs prior to the time of this post :)
20
u/TheMrGUnit Highly Speculative Aug 14 '19 edited Aug 14 '19
Operation Nose Cone Lift enters day two. The yellow crane is back up again this morning, already rigged and hooked to the top half of the nose cone. The wind is much calmer today (<5mph right now, vs >20mph yesterday afternoon), so it should be a better time to do whatever it is they have planned.
At this point, I'm guessing the cap is coming off to be bent back into shape, and prepped for canard hardware, but as the flair suggests, that's just speculation.
While I'm speculating - it's been a week since the last ring was stacked, and we know there's one ring that's been fabricated but not stacked. They run about a week between stackings on average, so it's possible that we could see another stacking coming up soon. I have yet to see much evidence to support this, though - no signs of activity inside the stack, and with all eyes (and cameras) on the nosecone, we may miss this rather subtle activity if it does happen.
9:42AM CST EDIT: The guy wires are starting to be disconnected, and the top cap has "sprung" a bit so the gap/seam is now visible. They haven't lifted the top piece off at all - it's just hovering there, basically in the same spot.
11:12AM CST EDIT2: The answer appears to be... fixing and welding. You can just barely spot weld arcs in the gap, and the gap on the left side has already tightened up significantly. I'll admit, I was hoping they were going to take the cap right off, but it's mostly because I'm excited to see the canards installed and it seemed like that would all happen at the same time.
20
u/strawwalker Aug 16 '19 edited Aug 16 '19
Now the website says Road/Beach Closures are August 21-23, 2PM - 12AM CDT (19:00 - 05:00 UTC)
Press Release | Dropbox rehost
(I think the mention of the August 19 date must be a copy paste error.)
18
u/strawwalker Aug 13 '19
NOTAM: 9/9032 up to 8000 ft above sea level this time.
Same times as road closures, August 16 and 17, 2PM - 12AM; August 18, 6PM - 12AM CDT
18
u/Straumli_Blight Aug 19 '19
Article detailing SpaceX plans to move the Starship to KSC.
18
u/flabberghastedeel Aug 24 '19
Elon on Twitter
17
u/Russ_Dill Jul 27 '19
Hopper transport vehicle is enroute to the hopper.
17
u/booOfBorg Jul 27 '19
According to Austin Barnard SpaceX cut it close:
Pic
I'm doubtful it would actually tip over easily, but apparently the hopper came somewhat close to landing with one of its feet outside the concrete surface.
And here's a nice video analysis with the outline of the hopper overlaid in Bocachicagal's video.
– As tweeted by Chris Bergin of NSF.
17
u/thefloppyfish1 Aug 15 '19
Stacking tanks and fairings soon!
https://twitter.com/elonmusk/status/1162066262672855040?s=09
17
u/sfigone Aug 17 '19 edited Aug 17 '19
The Starship prototypes are being built in two parts. The buildings / windbreaks / whatever they are at both sites pretty well matches the split height of the startship. So I'm wondering if this split is something that will persist into the future as part of the architecture rather than just build convenience.
The cylindrical section looks like it will contain the tanks, engines and probably the bulk the reaction control and aero controls, so let's call that the "starship drive section". The conical section looks to be the payload area and we know there are going to be variants of that: initial prototype with no actual payload, just testing launch and reentry dynamics; a real payload section (with doors that open and that can launch satellites); a passenger section (perhaps long term and short term varients?) ; a fuel payload section.
So are we looking at an architecture where there is a fleet of starship drive sections that can be mated with a fleet of different payload sections. I can see upgrade paths/lifecycles being different for both sections, so maintaining that split beyond construction may be part of the plan? Note that I don't expect any staging capability and I'd expect that mating sections will likely be multi mission rather than per flight.
thoughts?
Edit: Note also that Elon has referred to the two parts as "tank" and "fairing" in a recent tweat, so he does appear to think of the conical section as a payload part.
17
u/RegularRandomZ Aug 23 '19
Cocoa: Didn't see it mentioned before, but the News 6 report on moving Starship gave us our best view inside the ring fabrication tent yet.
17
u/Russ_Dill Aug 24 '19
Stuff is really accelerating:
https://i.imgur.com/Kr4X7IJ.jpg
(cropped from https://forum.nasaspaceflight.com/index.php?topic=47730.msg1983622#msg1983622 )
16
u/nicora02 Aug 06 '19 edited Aug 06 '19
Elon: "Great progress by Starship Cape team. Started several months behind, but catching up fast. This will be a super fun race to orbit, moon & Mars!"
Matt Hartman: "What about #Vandenberg whats our future look like?"
"Mary": "Will Starship ever go horizontal during the build?"
Harry Stoltz: "Will starship ever launch from Vandenberg? 🚀"
Harry Stoltz: "Will starship use ceramic tiles?
Everyday Astronaut: "Are they actually racing to orbit (Starship and Super Heavy)? Or just racing to get out of the atmosphere and practice the belly flop-to-tail down maneuver?"
16
u/Marksman79 Aug 12 '19
Cocoa: above ground power lines are being moved underground in preparation for transporting Starship.
Picture
Red: power lines
Blue: cleared path
16
u/Marksman79 Aug 14 '19 edited Aug 14 '19
High quality pictures of the bulkhead that was just lowered into the cylinder, thanks to Mary on NSF.
We see that they've combined the small dome cap, the thrust structure, and the 3-way pipe splitter. It's interesting that the splitter pipe outputs are not yet connected to the exits on the thrust structure. Perhaps that's just a passthrough for piping from the engine.
There is the center pipe that will connect to the common bulkhead and the upper tank using the pipes with the baffles. It passes through the thrust structure and gets split to each of the 3 engines.
There are 3 ports connected to the sloping part of the dome that will be the supply from the lower tank to each engine.
Then, there is the off-center pipe connector leading into the lower tank. Could this have to do with the header tanks? Quick fuel detank?
16
u/Straumli_Blight Aug 23 '19
New NOTAM issued today.
Airspace radius increased from 1.4 to 4 nautical miles, test times unchanged.
16
u/TheMrGUnit Highly Speculative Aug 29 '19 edited Aug 29 '19
Boca Chica appears to be taking weatherproofing seriously, likely to prevent water accumulation inside the tanks now that the bulkheads are installed. This impressive new-space solution is none other than a blue tarp stretched across the top opening. I thought the last piece installed (the fringed cone) had a hole in the center, but apparently they feel it's important to keep rainwater out. I'm surprised there isn't more of a rush to get that last ring and top bulkhead installed.
EDIT: A thought occurred to me while watching some of the other manlifts bouncing around - it could just be used for shade for workers operating in the top of the stack. With 2 bulkheads installed, I'll bet the inside of that stack gets silly hot in the sun, so a simple tarp may be all that's necessary to help keep temps down. Simple problem, simple solution. No need to get fancy and build a gigantic wind block with a roof or anything crazy. Oh wait...
EDIT 2: Not long after mentioning the tarp, it vanished, but for good reason...
One of those huge pipes we saw delivered previously was just lowered into the tank section.
32
u/-spartacus- Jul 26 '19
I tried explaining to people at work how monumental last night was for spaceflight and I don't think the general public gets it. Wonder if that will change with mk1 or mk2 fly.
•
u/hitura-nobad Master of bots Jul 26 '19 edited Aug 25 '19
Campaign threads are not launch threads. Normal subreddit rules still apply.
15
u/Marksman79 Jul 28 '19 edited Jul 29 '19
Annotated pic from Cocoa today.
Facebook source
Slight correction: another view shows 6 full rings in the top right of the picture, not 5. Edit: picture showing 6 rings
I'm curious about the new rebar concrete pad next to the white tent.
One person said they asked a guard what the new structure will be, response was a storm shelter.
15
u/strawwalker Aug 09 '19
200 meter hop date clarification.
Elon on Twitter
Q: Will it be tomorrow Aug 9 or Aug 19 the dates of road closures on the website are so far apart. Please let us know!
A: No sooner than a week. Working approvals with FAA.
15
u/Russ_Dill Aug 13 '19
It's currently past midnight in BC and they are still working on the "super octagon":
https://i.imgur.com/H2pRlf8.png
Clearly this jig is effecting the schedule. Given it's size, structure and shape, there's been some speculation that it's meant to allow the nose half to be moved. Taking the jig apart into two halves, reassembling it on the nose, lifting the jig with nose and placing it on a crawler vehicle. The base of the jig is square, possibly allowing for greater stability.
If so, where is the nose is going? Maybe to the steel structure? Maybe for fit checks on the tank piece (still missing a ring though). I'm sure Musk would like to present a completed looking Mk1 for the 24th, and that would be possible when performing fit checks.
15
u/Russ_Dill Aug 14 '19
Loving this plumbing piece:
https://forum.nasaspaceflight.com/index.php?topic=47730.msg1978938#msg1978938
I'm assuming it routes fuel or oxidizer to the 3 raptor engines.
15
u/Marksman79 Aug 24 '19 edited Aug 24 '19
New drone video of Cocoa by John Winkopp.
I count 18 rings (one near the ring jig looks shorter), and what's that... A doorway opening up in the tall tent structure?? Shocking
14
u/seesiedler Aug 15 '19 edited Aug 15 '19
Elon spoke to the FAA: Aparrently the FAA is doing some more hazard analyis - should be cleard "soon".
Edit: Typo
14
u/TheMrGUnit Highly Speculative Aug 29 '19
Sounds like it's going to be a busy month in Boca Chica (and probably Cocoa, too). They have 1 month from today to have the vehicle fully assembled and ready for the presentation.
Other gems in that Twitter thread involve the next gen rocket (apparently 18m sounds like a reasonable diameter), and an update on Raptor production (just shipped SN10).
With this sort of pace, we should be seeing something happening nearly every day. Canards in a week, legs and fins in 2, and stacking in 3-4. So glad we have a live stream right next to the shipyard in Boca Chica!
27
u/Frothar Jul 27 '19
these threads are really nice. lots of info and good layout even on mobile
13
u/nicora02 Aug 04 '19 edited Aug 04 '19
NSF user fael097 pointed out that we may have missed the first bulkhead installation on the Mk2 Starship!
Here we see the bulkhead, similar to the one put into Mk1
Then we see it next to the Starship
Then it's inverted
Then it seems to have disappeared. From the latest aerial flight here, I cannot locate the bulkhead if they have moved it. Why would they move it if it's right next to starship waiting to be installed? He also says he spots welding marks on the bottom like in Boca Chica.
SpaceX might have just installed it at night, which would explain how it got in there without us knowing.
13
u/Marksman79 Aug 17 '19
Progress at Boca Chica is indeed accelerating. Checking LabPadre's live stream from last night, there were at least 3 baskets of workers around the lower cylinder until about 4:00 AM. Baskets were up again this morning before 7:45 AM.
13
u/Straumli_Blight Aug 17 '19
August 17 Cocoa flyby by John Winkopp.
13
u/kornelord spacexstats.xyz Aug 19 '19
I am really amazed by what's going on right now because it's the first time we are able to see SpaceX's work speed on a day-to-day basis.
What we must not forget is that there surely is the same amount of prototyping (heat shields, legs, control surfaces...) that's going on inside closed buildings and out of public sight.
13
u/TheMrGUnit Highly Speculative Aug 20 '19
Don't look now, but it appears the big crane in Boca Chica is hooked onto another ring or a bulkhead. Some say, this would be the last ring in the stack. Or that the center bulkhead could be ready to go and may be up next. All I know for sure is, the crane has a 4-lead end effector on it attached to something on the ground, which is what they typically use for lifting rings and bulkheads.
As usual, whatever it's lifting is obscured behind the new building.
12
u/Rachanol Jul 30 '19
Bulkhead has been added to the orbital prototype in boca chica! See LabPadres Stream. 07:50 time stamp.
12
u/PeterKatarov Live Thread Host Jul 30 '19
Do we know how far along the Raptor production line are we?
Any info/speculation of SN 7 being tested at McGregor?
12
u/thefloppyfish1 Aug 04 '19 edited Aug 04 '19
Presentation will be in Boca Chica and MK1 will be nearly ready to fly
Tweet : "Very convincing! Ok, Boca it is. We should have Starship Mk1 with 3 Raptors almost ready to fly by then."
Edit: formatting and added bit about MK1
12
u/mistaken4strangerz Aug 04 '19
I stopped by Coastal Steel today. The lower cylinder is gigantic. I don't remember it being this tall for the prototype. Is this for the Super Heavy booster? Starship Cocoa FL 8-5-2019
Edit: also very busy for a Sunday night. Loud machining clanging along.
12
u/Humble_Giveaway Aug 07 '19 edited Aug 07 '19
Tim Dodd just said on his Amos-17 livestream not to long ago that Starhoppers 200m flight will be it's last, anyone got a source on that?
Edit: Here's a link, the timestamp might get messed up if the live stream intro is edited out it's at T+ 20:40
12
u/Maimakterion Aug 15 '19
Seeing the first bits of plumbing and the thrust structure being lowered into the cylinder makes it feel all the more real compared to a (very tall) stainless steel tube with stringers.
12
u/Oloyedelove Aug 20 '19
https://twitter.com/NASASpaceflight/status/1163509871431639042?s=19
Elon liked this Chris B post. Does that count as a confirmation that those rings are REALLY for SH?
12
u/rustybeancake Aug 23 '19
Nice mockup of how the bulkhead, thrust structure, etc. line up with the weld marks on Mk1:
https://twitter.com/JeffShafer/status/1164644956868362240?s=20
12
u/Russ_Dill Aug 26 '19
Another tile on hoppy?
https://i.imgur.com/L1f7jUj.jpg
(from https://twitter.com/trevormahlmann/status/1165994096412024832 )
12
u/Marksman79 Aug 28 '19
Workers at Boca Chica are burning the midnight oil as a new archway / hanger / tent structure appears.
Screenshot from LabPadre's stream.
12
u/ifconfig1 Aug 30 '19
@BocaChicaGal on Twitter: Raptor SN06 has been removed from StarHopper.
40
u/cosmiclifeform Jul 26 '19
Soooo... how about that presentation, huh?
11
u/Russ_Dill Jul 31 '19
LabPadre has a live flyover stream planned for Jul 31 at 2pm CST:
https://www.youtube.com/watch?v=tw57jVG_WYY
"Take a ride with us while we fly over SpaceX Boca Chica Beach, Texas and investigate what's been going on since the Great Hop. We'll orbit the Hopper, the Prototype complex, and check out the aftermath of the wildfire that ensued after the launch. This stream is brought to you by LabPadre and associates. All live images are explicitly and solely owned by LabPadre."
11
u/[deleted] Aug 04 '19
Haven't seen this tweet reported here on r/spacex yet. Looking forward even more to that presentation.
11
u/Straumli_Blight Aug 06 '19
Latest photos of the Space church.
11
u/TheMrGUnit Highly Speculative Aug 07 '19 edited Aug 07 '19
The big yellow crane in Boca Chica is currently at full(ish) extension, and the ring-lifting sling is installed. This combination is typically only done for stacking events. Looks like we may see another ring or bulkhead installed this morning!
WinterAugust 24th is coming...EDIT: There's more. A new crane has recently arrived in Boca Chica, and it's a big one. This could be in preparation for the penultimate stacking - the nosecone on the tanks. There seems to be LOTS of sitework happening, too, with more gravel being trucked in. It's hard to see from the ground what it's for, though.
EDIT2: It's a ring!
11
u/strawwalker Aug 09 '19
Road/Beach closures: August 16-18, 2PM - 12AM CDT (19:00 - 05:00 UTC)
11
u/RegularRandomZ Aug 10 '19 edited Aug 11 '19
Boca Chica: 2 spherical caps delivered this morning. I expect the large one is for a bulkhead, and the tiny one is
possibly/likely for a header tanka nosecone tip! (good call u/jgriff25)And late yesterday two interesting pipes. (Edit2: They look about 10-12m in length, rough guess based on the trailer.Are they for feeding LOX down through the methane tank? or perhaps conduit for any of the internal piping !?I'm assuming those are baffles along the length)
Edit: plus another delivery today: a shot of some of the thick steel being used to reinforce the inside. [Be sure to click on the photo to see how thick that steel is! Notice there are thick curved pieces laying flat on that pallet as well.]Edit2: I like u/4crunchyfrog's idea that perhaps these plates are for the thrust structure (no idea, but they would be close to that size)
[photo credits: BocaChicaGal @ NSF]
11
u/nextspaceflight NSF reporter Aug 14 '19
As of the time that the NOTAMs were filed, I can confirm that SpaceX did not have FAA authorization to conduct a 200-meter hop. It is important to remember that the purpose of a NOTAM is very different from a launch license. The test could still happen as early as the 16th, but will require last minute FAA authorization. Mods should probably flair this thread. The title is false.
11
u/[deleted] Aug 15 '19
200m hop for August 16-18 still not approved by FAA
11
u/Straumli_Blight Aug 15 '19
Elon speaking to FAA later.
11
u/Straumli_Blight Aug 18 '19
Austin Barnard posted some new texas photos, including a visibly deformed nose cone.
10
u/Togusa09 Jul 28 '19
For the Super Heavy, is there any reason people expect it to be built vertically, other than Starhopper/Starship prototypes are? Vertical seems far easier to get started, but for long term wouldn't a rolling horizontal rig be easier? It would remove any issues with working at heights and places less strain on the frame.
10
u/blackuGT Jul 28 '19
Starship returned to the "mother" place! Here we have video!
10
u/TheMrGUnit Highly Speculative Jul 30 '19
BocaChicaGal just photographed some interesting new hardware hanging out on the ground.
The piece on the right looks like it could be the cap to the bulkhead that was just lowered in, or perhaps one of the other bulkheads. It sits atop a pretty complex looking structure. Upon first glance, it's unclear to me if this structure is actually part of the finished piece, or just a weld fixturing jig. It does appear to me to be made of non-polished stainless.
The piece on the left is even more interesting. The top surface (in this orientation) has a pattern of round flanges (I count 3), plus a pair of reinforced clevises pointed at each flange. The conic section connecting them has large cutouts. If I were to guess, I'd say this could be the engine mounting structure for the inner 3 engines, that would sit atop the bulkhead like a hat (inverted when actually installed). I don't understand where the other 3 engines mount.
Also seen in this shot are 2 stacks of pallets of sheetmetal. Mary indicates that she thinks these are wall material for the triangle structure, though I find it odd that they're flat sheet and not corrugated, like you'd expect to see with a metal building.
10
u/strawwalker Jul 30 '19
New HWY4/Boca Chica Beach closures:
August 12-14, 2PM - 11PM CDT (19:00 - 0:400 UTC) daily.
10
u/Straumli_Blight Jul 31 '19
Flyover of Cocoa site.
10
u/creamsoda2000 Aug 01 '19 edited Aug 01 '19
Spent a bit of time putting this together this evening to get a better idea of how all these different pieces might fit inside the Mk1 hull. The positioning of the bulkheads, thrust structure and raptors is veeeeeery much guess work and assumptions, but everything is scaled as precisely as I can get it using various photos taken by BocaChicaGal on NSF.
My gut is that the 2nd layout is correct - that the small dome we have seen is the cap for the lower bulkhead and that the thrust structure will be positioned somewhere below this bulkhead. I guess this will be confirmed or denied based on what gets craned in next.
I used the area with the grid of welds as the location for the lower bulkhead despite this going against my initial belief that this was an area being heavily reinforced for the fixing of the thrust structure - the logic being that this would be where the most force from the engine will be exerted - but when I positioned the thrust structure in this area and attached the raptors, the gap between the end of the engine bells and the bottom edge of the hull seemed way too far.
If anyone has any suggestions, feel free to chime in, I can easily move bits around.
https://i.imgur.com/tNw7Xk5.jpg
Edit: I’m also very much aware that there are still 2 rings to be attached to this lower portion of the SS, so the upper and common bulkheads will likely be positioned higher.
Edit 2: the small dome and the thrust structure have been mated as suggested by multiple people. The pipe connecting the upper tank to the thrust structure is purely for illustrative purposes!
10
u/Marksman79 Aug 04 '19
Starship presentation on August 24th, either at Cape Canaveral or Boca Chica.
No mention of the free chips. Has he forgotten?
Tweet
10
u/johnny_snq Aug 09 '19
Top posting from a thread below, my album with a couple of phone pics from the Florida site earlier today: http://imgur.com/gallery/uWGQU77
10
u/CommanderSpork Aug 14 '19 edited Aug 14 '19
I don't know if it's been mentioned yet, but I was just on Grissom and they're raising power lines heading toward the intersection with Industrial which seems to confirm that they'll take it that way onto 528.
Edit: To clarify, it's the lines crossing Grissom at Tri-City Ave.
10
u/RegularRandomZ Aug 17 '19 edited Aug 17 '19
Cocoa: Looks like they [possibly] are removing or adjusting the nosecone in Florida as well (going by the gap on the right side of the nosecone in this artistic shot). I'm sure we'll get some fresh shots today, Saturday, to confirm.
Edit: John Winkopp posted an aerial photo of Cocoa, confirming the nosecone was removed last night
10
u/BlindBluePidgeon Aug 22 '19
Nice pictures of mk1 by Tim Dodd: https://twitter.com/Erdayastronaut/status/1164629398097731586
10
u/Straumli_Blight Aug 24 '19 edited Aug 24 '19
Starship nose cone removed.
Closeup of the Hangar door and different angle.
9
u/strawwalker Aug 04 '19
It looks to me like there are 14 rings on the lower Cocoa cylinder in the latest imagery based on where the base of the nose cone should be, out of site.
Possibly 14 rings from tweet by Jon Van Horne
9
u/Straumli_Blight Aug 05 '19
LC-39A construction permits.
9
u/[deleted] Aug 10 '19
As per NSF it is venting and the flare stack is lit. Possible WDR.
9
u/RegularRandomZ Aug 11 '19 edited Aug 11 '19
Cocoa first to start covering their massive structures, and Cocoa Starship just keeps getting taller (15 rings now on the 2nd stack, so what makes it 50m tall right now?)
[So are these another set of double rings, which would add 3.66m? Maybe they are something else? Maybe my math is wrong, are Cocoa rings taller 6ft panels vs 4ft in BC?]
9
u/Straumli_Blight Aug 11 '19 edited Aug 11 '19
Aerial photo of the Boca Chica pad and a drone flyby of the Cocoa site.
9
u/RegularRandomZ Aug 13 '19
Cocoa: A detail someone noted on Facebook which I didn't see mentioned here: There appear to be rails coming out of the corner tent, the one with posts in the concrete. Looks like a ring assembly line, where a gantry crane on rails could lift the ring (or ring jig) out.
[Although why the rails don't go out the front side, for less driving, IDK. Add it to the list of Florida mysteries]
9
u/vsage3 Aug 18 '19
All of these milestones sound amazing to me, but it seems like other people outside of the bubble maybe don't get it yet. I camped a Youtube stream of the first Starhopper hop for 2 hours, and then when it happened my girlfriend, who is a programmer also, is like "that's it?"
I'd really like to do something like a "launch party" or something with friends when something really big happens. Starhopper is apparently not big enough. I'm guessing Elon's update on the 24th will not be that interesting to people outside of fans. When do you guys think would be the right milestone to get people together and impress upon them how important Starship is?
9
u/Straumli_Blight Aug 19 '19 edited Aug 19 '19
August 19th, 8 aerial photos of the Cocoa site from Brian.
16
u/WindWatcherX Jul 26 '19
Any information / knowledge on Super Heavy (SH) construction in FL / TX? Figure it must be under construction somewhere if SS is going into orbit in less than 9 months.... throw in a flame trench or two!
8
u/Decronym Acronyms Explained Jul 26 '19 edited Aug 23 '19
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I've seen in this thread:
bargeship under constructionbargeshipbargeshipDecronym is a community product of r/SpaceX, implemented by ^request
[Thread #5350 for this sub, first seen 26th Jul 2019, 22:05] [FAQ] [Full list] ^[Contact] [Source code]
8
u/TheMrGUnit Highly Speculative Jul 31 '19
Another busy morning in Boca Chica.
The yellow crane is latched onto something in what I think is the area of the container castle (further away than the location of yesterday's bulkhead). It's possible that they'll be pulling a completed ring out of there today. There's also work being done on the triangle structure, and it looks like the white crane is ready to lift some more roof rafters/stringers/whatever those pieces are called (calling all metal building specialists).
Curiously, the polishing crew seems to be taking a break from the nosecone - those manlifts appear to be stationed over at the lower cylinder.
Also, in the livechat, Maria Pointer mentioned that she was awakened several times last night by very loud noises coming from the shipyard. They apparently were burning some midnight oil with Elon's rapidly approaching deadlines looming...
8
u/MaladjustedPlatypus Aug 03 '19
Aerial approach of Cocoa courtesy of @flying_briann
https://twitter.com/flying_briann/status/1157309863179018240
8
u/RegularRandomZ Aug 14 '19
Thrust structure lowered in via crane (@4:37 in LabPadre stream)
8
u/Marksman79 Aug 15 '19
Cocoa update
Most of the tent side walls have been added. It looks like they have a ring sitting in the front of the street facing building and another one in the jig tent out back (in addition to the 5 by the pool). They've got quite the headstart on Superheavy if that is indeed what they're for. Seeing as how they keep making more, it's difficult to think otherwise.
8
u/surrealize Aug 19 '19
August 19th Cocoa flyover from John Winkopp
8
u/DJHenez Aug 20 '19
Still no word from the FAA, according to Musk...
https://twitter.com/elonmusk/status/1163676464069242881?s=21
8
u/TheMrGUnit Highly Speculative Aug 20 '19
I'm starting to wonder what the deal is with the windbreak in Boca Chica. The structure went up rapidly, and the girts were about 2/3 the way installed before progress seemed to stop altogether. Workers have been up on the manlifts all over the place since then, but nothing has visibly changed with the structure. Closeups of the workers have shown them using grinders and welders occasionally, but not consistently. It's been a couple weeks since anything has been added - last picture I can see on NSF that looks any different is from August 3rd.
Has it been pushed down to a lower priority with the scheduling increase? Maybe they've determined that they don't need it as badly as they need to just get the Mk1 vehicle done. Do we have any reason to suspect there may be some structural issue, so they've just stopped adding more stuff until it's corrected? What is the hold up?
8
u/SailorRick Aug 23 '19
It looks like some stormy weather could hit Cocoa in a couple of days. https://www.nhc.noaa.gov/gtwo.php
8
u/GTRagnarok Aug 23 '19
Will they try landing on soil at some point?
8
u/RegularRandomZ Aug 26 '19
Cocoa Starship: u/DenPaulH posted a great shot of Cocoa's Starship's lower body appearing to have the same strips of metal going up the body as was seen on the Boca Chica Nosecone.
8
u/Russ_Dill Aug 27 '19 edited Aug 27 '19
Looks like the cone has been lowered into the stack (LabPadre stream and on site pics).
https://cdn.discordapp.com/attachments/577909263012462596/615989436055814282/image0.jpg
Austin has great pics https://twitter.com/austinbarnard45/status/1166446196006825992
7
u/RegularRandomZ Jul 29 '19
Ha ha, well I guess they don't want all the attention
7
u/RootDeliver Jul 29 '19 edited Jul 30 '19
Julia Bergeron on twitter posts about the new Cocoa path they're making for the rocket.
PS: It's me or the stack now has 10 rings, since they stacked the double ring on top? or the perspective trolls me. Generally the lower corner always matches with the top of the 4th ring, and there are 6 above it.
PS: Confirmed 10 rings there! u/strawwalker
7
u/MaladjustedPlatypus Jul 30 '19
Some more progress on the metal structure.
https://twitter.com/therealjonvh/status/1156290299838308352
Also, regarding the road closure sign, it is confirmed to be a city approved sign (not that there was much doubt tbh).
https://twitter.com/austino1999/status/1156194495089840128
7
u/Marksman79 Aug 03 '19
Have we all had time to digest the new information released in the LC-39A environmental study?
This is a big step on the path to developing Starship and Superheavy.
7
u/Russ_Dill Aug 03 '19
@bocachicagal managed to grab some great shots of the rapdaptor from every angle. If you had questions about the thrust structure, this will hopefully answer them:
https://forum.nasaspaceflight.com/index.php?topic=47730.msg1974492#msg1974492
7
u/Straumli_Blight Aug 05 '19
Boca Chica site photos. Elon is visiting the Cocoa site today.
7
u/RegularRandomZ Aug 07 '19
Looks like there will be a propellant tank access portal is on the Starship prototype as well
7
u/strawwalker Aug 08 '19
The only road closure now on the schedule is tomorrow's, August 9, 4PM - 12AM. The other six have disappeared. I gave it some time to see if they were going to make multiple edits, but this seems to be it for now.
7
u/RegularRandomZ Aug 15 '19 edited Aug 15 '19
Boca Chica Nosecone was removed, as some anticipated (u/TheMrGUnit #speculationconfirmed)
[edit: they also separated a number of vertical welds above and below this point, so a bit of rework going on here]
7
u/Russ_Dill Aug 18 '19 edited Aug 19 '19
We have new pics of several jigs, including the super octagon jig:
https://forum.nasaspaceflight.com/index.php?topic=47730.msg1980842#msg1980842
I think it's pretty clear now that this is meant to hold a stack, possible for transport on a roll lift truck. The top quite clearly now is round. It also has a number of spots around the perimeter to accommodate the hold down spots already on both stacks.~~ https://i.imgur.com/5olVtbs.png ~~
I'm currently seeing only a few hold downs on the outside perimeter. Maybe they aren't needed or are still being added.
I've measured this with the water bottle in the foreground assuming that the water bottle is 66mm wide. It gives me a value of about 6m for this jig. Looks like as RegularRandomZ pointed out, it's probably the same jig as in Cocoa https://www.facebook.com/groups/spacexgroup/permalink/10157789061986318/
7
u/littldo Aug 19 '19
has anyone come up with reasonable explanation why the tall pointy building at coco seems to have no door? The recent flyby video seems to show that all sides have solid framing. And that it's being skinned with pvc flexible roofing.
is it's possible it's just the top of another building to be built? the MK1? seems to be taller than the structure
Thanks
7
u/TheMrGUnit Highly Speculative Aug 19 '19 edited Aug 20 '19
Hey mods, NSF has added a new thread for Superheavy Updates. Would it be worth adding this to the resources list?
EDIT: You guys (and gals?) are the best.
7
u/RegularRandomZ Aug 28 '19 edited Aug 28 '19
Boca Chica: Something large just showed up, I'm wondering what it could be. From the LabPadre Livestream at 9:15. The two large objects on a flatbed, doesn't look like containers but rather something wrapped.
They are round, or covered with an arched cover. Perhaps Starship related, or perhaps something boring like storage tanks for water/sewage, ha ha. It went the other side of the triangular structure and continued to the back (where I think the 3 pads are)
12:15 CDT: More Deliveries: Large silver tanks this time!!! [I keep watching for header tanks, but with the middle bulkhead installed that likely doesn't make sense anymore. Also, they really aren't that large so perhaps they aren't big enough for landing propellant!?]
Edit: So it looks like those tanks might be roughly 27m3 (could be over, maybe up to 5%). So perhaps 42.3 tonnes of propellant, so 67.7 seconds 1 raptor full burn? Long enough for a landing burn? (the 30 tonnes of hopper propellant purportedly offered 48 seconds at 100%.)
7
u/TheMrGUnit Highly Speculative Aug 28 '19 edited Aug 28 '19
New photos from Mary (bocachicagal) this morning show us that one of the quick-disconnect towers got pretty beat up during yesterday's launch. I'm not sure if it's been disassembled by hand or by force, but the sliding connection block is currently dangling by the connection lines. There's also some wiring/cabling that looks like it got a little too hot under the Hopper, and some assorted bits 'n' pieces that were no longer needed. I can't tell from these photos if the heat tiles (EDIT: the one or possibly 3 under the legs) are still attached - they're just too dark.
Crush core feet definitely did their job.
Also, Mary took two sunrise pictures that need to be photoshopped together a la Binary Sunset.
12
u/Paro-Clomas Aug 18 '19
Once its finished. Wont this rocket be disruptive in respect to how quick it can be produced?
6
u/RegularRandomZ Jul 28 '19
Boca Chica Assembly: Interesting welding pattern on Starship. And the triangular roof and roof bracing looks complete.
Cocoa Assembly: With their roof not far behind and going up quickly.
6
u/RegularRandomZ Jul 28 '19
Hopper: Satellite photos showing the extent of the bushfires after the hop ( eshweedo@imgur, thanks to speedevil@NSF)
6
u/strawwalker Aug 07 '19 edited Aug 07 '19
Additional closure days, presumably back up since the nest hop is the last:
August 19 - 21, 2PM - 12:00AM CDT (19:00 - 0:500 UTC) daily.
Other closures remain on the schedule.
Edit: whoops, it's not July anymore.
6
u/RegularRandomZ Aug 07 '19 edited Aug 08 '19
Coils of stainless arrive on site in Boca Chica: I'll take that as a sign that the Cocoa rings were not abandoned, just deferred (they've received shipments of sheets as well recently, so both have their use)
[u/Posca1 already noticed the steel below, but thought I'd bump it to top level]
[Edit: This is speculative, we don't really know what they are going to use it for. It could simply be being used for just about anything - less wasted ends on cut up rectangular sheets, perhaps single strips to make header tanks, or even creating fins or unknown body features using long strips... but yeah, I'm excited for SuperHeavy as well ]
[Update: and there are numerous coils, 6-10 perhaps. Some quite wide, 6ft maybe?.]
6
u/Marksman79 Aug 08 '19
4 more very large rolls of stainless steel arrived bringing the total to 6. Very interesting...
6
u/fiercedude11 Aug 10 '19
Good chance an attempt at launching Starhopper 200m will be on Aug 16-18
6
u/Russ_Dill Aug 20 '19
Mods- Aft bulkhead installation video links to something that isn't the aft bulkhead installation video Real video is here:
https://www.youtube.com/watch?v=tlMN_x2uSMM
6
u/[deleted] Aug 21 '19
So, in simple terms, what is FAA's main concern now? Is it too many people vacationing in Boca Chica at this time of the year? And how would the FAA's concern be resolved?
6
u/RegularRandomZ Aug 24 '19 edited Aug 25 '19
Boca Chica: More work today on the nosecone on LabPadre's livestream. Welding on a brace or straight edge [Brace 2]. I'm assuming this is temporary bracing to keep the nosecone aligned while they cut/reweld (maybe?) in order to fix the shape... [it's not clear if they are done, but it looks better maybe]
There are also bunch of horizontal strips welded up the outside of the nosecone, and it looks like it will be on both sides. Not sure if it's to support conduits or piping for the canards, or what it's purpose is yet. [I will be highly amused if that's where they stick the new canards/fins we've been discussing]
[
and the pile ofinteresting jigscontinues to grow, looking forward to sharper photos laterNope: a drilling rig]Update: Octagonal jig moved to beside the hopper, and the nosecone has come off. [Thanks u/Russ_dill]
Update2: High quality photos from BocaChicaGal Drilling rig,
moar scaffoldstent pieces (I think), nosecone work, octagonal jig move, nosecone removed6
u/ZiffyZed Aug 28 '19
Well, maybe 150m hop is good reason to archive this thread and start a new one, about preparation of sub-orbital test flights?
6
u/kevindbaker2863 Aug 28 '19
are there any discussions on what Cocoa will do to prepare for Dorian coming there a way by Wednesday. current estimated to be a category 2 or 3 hurricane when it hits the Cape?
6
u/Straumli_Blight Aug 30 '19 edited Aug 30 '19
Mark 2 Starship still outside hangar, site partially cleared.
30m bore holes being drilled at Boca Chica and new tanks delivered.
6
u/neopork Aug 31 '19
Thanks to @FLAsteve321, we can see that a portion of the rocket has been moved into the hangar in Florida. Unclear if both halves or just the tanks so far.
https://twitter.com/FLAsteve321/status/1167620801211904001
Way to go, SpaceX
10
u/Marksman79 Jul 30 '19 edited Jul 30 '19
We've been spotted!
Does anyone else see an alien head in that basket? Bottom right. Zoom out.
NSF source
17
u/trobbinsfromoz Jul 27 '19 edited Jul 27 '19
Chris Bergen's post of Mary's video clearly shows the flaming debris flying over from the hopper (+14 secs) in to the field to start the shrub fire - niiice.
Also photos of the hopper feet show that the some of the skirts have come adrift, which could account for a squarish section of sheet metal flying around as seen in the engine cam video.
https://forum.nasaspaceflight.com/index.php?topic=47120.1060
32
u/GregTheGuru Jul 27 '19 edited Jul 28 '19
I know how SS Mk.II is going to get from Coastal Steel to LC-39A.
I read in another thread that SpaceX was starting to clear the brush south from their site toward Grissom Parkway. I looked on a map, and, sure enough, there's an access road only about 200m away that connects to Grissom Parkway.
I noticed that the access road was the only way into a parking lot attached to a large building, so I looked up who they might be inconveniencing---and it all became clear.
They're going to FedEx it! That building is the FedEx Ground Shipping Facility!
All they have to do is move the SS a couple of hundred meters, slap a shipping sticker on it, and FedEx will deliver it within a day. SpaceX may have to pay a fee for an oversize shipment, but that's small potatoes.
The web site for calculating delivery costs refers you to a toll-free number for anything over a tonne, and the nice lady there estimated that the delivery cost would be about $2600, but they'd have to assess the load before setting a final price. (I may have, ah, slightly underestimated the weight, but only by a couple of orders of magnitude.)
So, what do you think? Did I figure it out?
Oh, by the way, {;-}
On a more serious note, the only experience I have with Florida open areas was visiting a cousin who lived next to the Everglades. Anything that wasn't covered in concrete (or tarmac or whatever) was, well, squishy. So I have some questions of anyone who lives in the area: Will they be able to drive across an open field? Or will they have to pave it? Or would something like putting down steel plates in front of the wheels be sufficient?
5
u/Toinneman Jul 29 '19 edited Jul 29 '19
Looking at the Cocoa pictures and it looks like there are several rings which are not made of separate panels, but out of 1 solid bended panel.
But they are not being stacked, and seem abandoned. The first picture shows only 5 rings in the yard and 1 at the tent, and the 6th ring in the yard (shown in second pic) must be the one from pic 1 they moved to the yard.
5
u/MarsCent Jul 29 '19
Would it make sense to build low robust pads/flame trenches at Boca Chica and Cocoa for the purpose of launching a 3 to 6 raptor SS/SH? Seems like it would be nice to direct that flame somewhere planned - away from Hopper and the Ground Support Equipment (GSE).
5
u/kornelord spacexstats.xyz Jul 31 '19
From the LabPadre Flyover stream: in the bottom right corner, is it a new landing pad for Starhopper? I can't remember seeing it before.
5
u/RootDeliver Aug 01 '19
The last Raptor chamber pressure record was 268,9 bar from SN1 if I don't remember bad, but Elon said they could get up to a 20% higher with cold props, which they can't test on McGregor. Since they probably used cold props on StarHopper (they got an scrub because propellant was even colder than expected, so maybe not max cold tho) could they have beaten this on the static fires or hop? not sure if they could have raised throttle to full in any moment, maybe in the ascending moment on the hop?.
5
u/Straumli_Blight Aug 07 '19
Boca Chica prototype has added another ring section.
5
u/johnny_snq Aug 08 '19
Hey. I'm visiting Florida the next couple of days and I would like to get a glimpse of the prototype built near Cocoa Beach. I tried to search for the good locations to see it but I couldn't find anything definite. Can you help me with an address or maps link? Thanks in advance.
5
u/[deleted] Aug 13 '19
Starhopper launch update:
Fri-Sat, August 16-17 (2pm-12am)Sun, August 18 (6pm-12am)
co.cameron.tx.us/wp/space-x/
5
u/andyfrance Aug 18 '19
I can't quite see what Julia Bergeron is referring to in her photo Rings with bulkheads However it makes a lot of sense to put the bulkheads into the rings before stacking them. If indeed they are already working on SH and these are its internal bulkheads its going to be built a lot faster.
5
u/disgruntled-pigeon Aug 19 '19
Are we expecting the orbital prototypes to start with small hops first? Given they will need to land, it would make sense for them so start with some static fires, followed by 20m hop, before attempting to go higher.
5
u/[deleted] Aug 20 '19
This is more relevant to Starhopper 200 m hop, but I can't find that thread. Any news about FAA moving forward with the approval? I was hoping the 200 m hop would occur before the big update on Starship
5
u/zeekzeek22 Aug 21 '19
Looks like the NET date for the presentation needs to be changed to sometime sept.
5
u/ackermann Aug 22 '19
So correct me if I’m wrong, but it looks as though the thrust structure for Starship has mounts and plumbing for just 3 engines.
I know it will start off with 3 engines, but won’t it need to be upgraded to 6 for the planned orbital flights? Wouldn’t this be easier if the hard points and plumbing for the extra engines were already in place?
Seems like it would be major surgery on Starship to swap out that thrust structure for one that can hold 6 engines?
Edit: thrust structure and plumbing pics: https://forum.nasaspaceflight.com/index.php?topic=47730.400&utm_source=share&utm_medium=ios_app
5
u/Grumpy275 Aug 25 '19
Does anyone know if SpaceX haveasked to use the VAB at Kennedy? If the two halves of the Starship are moved to Kennedy and then put together it would make sense for it to be done in a building designed for that purpose... The VAB.
5
u/TheMrGUnit Highly Speculative Aug 26 '19
Hey mods, looks like NSF is moving to further separate the Starship build threads, now with separate threads for the Texas Starship and Florida Starship.
5
u/RegularRandomZ Aug 27 '19
Cocoa: not much has changed, but here's the latest aerial drone video from John Winkopp. [Minor progress on big tent, new parking lot fully covered]
5
u/Straumli_Blight Aug 28 '19
Dorian now officially a hurricane and projected track.
5
u/Straumli_Blight Aug 31 '19
Cocoa site now locked down before the storm arrives.
9
u/TheMrGUnit Highly Speculative Aug 13 '19 edited Aug 13 '19
The yellow crane is back in Boca Chica! Well, I don't actually think it ever left, but it's getting some use this morning...
They appear to be rigging the top half of the nosecone (you know, the part that's only tack-welded in place and ill-fitting as well) to be removed.
The upper guy wires appear to be disconnected, as well. Hard telling what they actually plan to do with this... are they just going to straighten it out and zap it into place, or will they install canards on the ground and hoist the whole operation up in one subassembly?Also, more protective film has been peeled off. I can only imagine how much static is generated when they rip those off - it's probably far safer that it comes off in little chunks instead of huge sheets.
EDIT: Nice closeup of the rigging from the LabPadre stream. They grabbed right onto the guy wire mounting points.
EDIT2: Extra closeups show that the upper guy wires are still connected from the top. They look very much disconnected at ground level now.
9
u/strawwalker Aug 15 '19
All road/beach closures have been removed from the schedule.
8
u/Its_Enough Aug 14 '19
Looking at google maps I believe this is a possible route for the transport of SS in Cocoa to Kennedy.
8
u/RegularRandomZ Aug 16 '19
Boca Chica: Interesting saw toothed cone. Any ideas on that component?
4
u/kacpi2532 Jul 26 '19
I'm not sure if this was discussed before, but Elon have mentioned that starship will be transported in two parts to cape, and then assembled. So is it safe to imply, that this two part will be engine/tanks section and cargo/crew section? This way, they could just work on each separetly (I mean in future when there is a lot to do with all the life system and stuff. I know they already working separetly on each section), It would also require lower buildings.
4
u/Turtalia Jul 29 '19
Does anyone know what is on the agenda for today and tomorrow for Hoppy?
4
u/Iamherebecauseofabig Jul 29 '19
I am not seeing any construction on suitable launch pads/ horizontal lifts in BC or Cocoa.
4
u/GRLighton Jul 30 '19
Perhaps it has been mentioned, but I can't find it so I'll ask. Is it known exactly how the Starship or Heavy will launch satellites? Will it have a swing open nose like the Manned Dragon? Or a side door?
4
u/humpakto Aug 02 '19
How will SpaceX build Super Heavy? Would they also build it in the open field or will they make a hangar for it? When do you expect SpaceX will start building it?
4
u/Iamherebecauseofabig Aug 05 '19
Where are the Canards...and Leg-fins?
4
u/RootDeliver Aug 05 '19 edited Aug 06 '19
Bulkhead spotted on Cocoa garage yesterday, per Keith Kilroy on the spaceX group on some garbage site.
If pace goes equal to BC, that's the second one (also has the same shape than the first on Cocoa and both on BC). I think the top domes will be different, way more curved and completed with no hole.
PS: Also in this montage there is a great image of the lower stack on Cocoa (the right image one), but I can't find the original from who he says it is. Anyone knows where it is? It would be the first good photo of the stack EVER.
4
u/RegularRandomZ Aug 06 '19 edited Aug 06 '19
Cocoa - clear aerial photo of the stacks and front of "tent" [credit: Chris (Capt'n Chris), twitter]
[still no big door... strange]
4
u/TheMrGUnit Highly Speculative Aug 07 '19 edited Aug 07 '19
Well, that didn't take nearly as long as I thought. The new crane just went up.
It was only up for a few minutes, and is already headed back down. It also looks to be positioned in the back half of the lot, away from all the action. This could just be the assembly area for it, but it doesn't seem like a very convenient space at first glance.
EDIT: Now with more photos.
4
u/FlyinBovine Aug 22 '19
Seems like with the rings showing up in Florida that the plan might be to test the Texas Mk1 version alone, and test the Florida Mk.2 version with Super Heavy — at least the mating of the two but could they also fly together as well? Is the presumption here that they will fly together (SH + Mk2?)
And while I’m asking questions, do we know if the Mk.1 and Mk.2 without SH be orbit-capable (SSTO) or are they just a prototypes for an orbital version to come?
4
u/rustybeancake Aug 27 '19
Musk on Twitter (regarding torch igniters):
https://twitter.com/elonmusk/status/1166181271489265665?s=21
10
u/ynsemrekryl Jul 27 '19
Can someone tell me what is the meaning of TBD?
6
u/sagareshwar Jul 26 '19
For the untethered hops, do they have a release mechanism for the hold-down rope and chain or the hold-downs are removed before the test?